Home

Watanabe 3 port Isolation Amplifier (High gain) ZM-310 is a high gain type 3-port isolation amplifier, and supports minute input (mV). In addition, since a transformer with a high coupling coefficient is used, loss is small and linearity is extremely excellent. Although it is a smalllinearity transformer, it has a high withstand voltage and high airtightness due to the case filling structure, making it ideal for isolating various signals such as transducer signal isolation and instrumentation signal isolation. Board mounting type with 2.54mm pitch allows for easy board layout.

Features

• High gain
• Compact and lightweight
• Low current consumption
• High CMR common mode noise rejection ratio
• High insulation, high withstand voltage

Anritsu AM8000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This series is replaced by Anritsu Temperature Datalogger AM-9000 Series, please click here to view

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

Anritsu Model AT series probes are Air temperature sensors designed to measure the temperature of Air. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu Model SHEATH series probes are internal temperature sensors designed to measure the temperature of liquids, air, and gases. The sheathed section can be bent to a radius five times the outer diameter of the sheath. Specific components may be combined to customize products for the needs of a customer's specific application.

Hyoda (Japan) Waterproof Bimetal Thermometer AY Series
Model: AY4, AY5, AY4-QS, AY5-QS

EDL’s Single Black Body (SBB) IR Calibrators were designed for easy and reliable testing of virtually any in line or handheld infrared pyrometer/gun. The Single Black Body (SBB) is used for applications requiring only one temperature range. Lightweight and compact, the SBB is ideal for use in the lab or in the field. Units are available to cover the most tested temperatures: SBB-1 (low-range) accommodates temperatures from -30 °C up to 110 °C, SBB-2 (mid-range) accommodates temperatures from ambient up to 350 °C, and SBB-3 (high-range) accommodates temperatures from ambient up to 650 °C.

Anritsu VA series probes are clip type surface temperature probes to measure temperature of a heat pipe.

Specific components may be combined to customize products the needs of a customer's specific application.

EDL's Comparison Cryostat Calibrator (CRYO-CAL-2) is the most trusted cryogenic calibration device available on the market. This passively cooled cryostat allows the user to safely and affordably calibrate a range of temperature measurement devices from 77K (-196 °C) up to 0 °C. 

Watanabe Isolator which outputs DC signal proportional to the input signals 

Features

• Space-saving and weight-saving by unifying converter and terminal block
• DIN rail mount
• 2 outputs
• Input / Output / Power supply isolated

Watanabe developed WPMZ series as multi-display digital panel meter matched to the production site, and focused on the basic performance such as [1. Easy to read] [2. Easy to use].

WPMZ is a product that can cover various requirements, such as process monitoring, quality judgement etc. at the production site for various applications and environment.

EDL Practi-Cal (PRI) Dry Well / Surface Calibrator (PRI) allows for easy testing and verification of virtually any size or shaped surface and insertion-style sensor – in one compact package. Utilizing an interchangeable dry well system, this calibrator has a uniform flat surface alongside a custom drilled insertion dry well. The PRI is ideal for use in the lab or in the field. It weighs in at under 30lbs., and can be taken virtually anywhere.

Anritsu FL Series can measure temperatures in environments subject to high-frequency waves, microwaves, or high voltages-areas where electric thermometers such as thermocouples, platinum resistance temperature detectors, and thermistors are typically ineffective.

・Capable of measurements in environments subject to high-frequency waves or high voltages.
・A fiber optic thermometer offering a wide measurement range.
・Analog output capability allows use for machine temperature control.
・Measurement data can be imported into a PC using software* bundles with the thermometer.
* for Microsoft® Windows® 7, Windows® 8.1, Windows® 10 (for English)

Anritsu SF series probes are flexible internal temperature sensors featuring extra-fine thermocouple wires covered with a Teflon-coated sheath. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Anritsu STN series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Specific components may be combined to customize products for the needs of a customer's specific application.

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.

The ones introduced here are Aichi Tokei's standard governors

• Governor for high temperature gas
• Governor with the precise adjustment handle
• Governor for gas that contains sulfide
• Other special governors

Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.

Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.

It comes with stainless steel float and a metering a valve.

Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application

Anritsu S series has made a great advance about all the quality because the contact strip has adopted a new method which incorporates a four fulcrum structure. It is the fruit of sensors technology that realized the fundamental quality of accuracy, response time and durability!

Support function of contact with tolerance slope range of ±4 degrees" added to the most accurate Anritsu SX Series.

The flexible head allows the temperature sensing part follows and closely contacts the object to be measured, and it's possible to high accurate measure more easily.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu HHT series probe are high-durability temperature sensors designed to measure high-temperature surfaces.

Specific components may be combined to customize products for the needs of a customer's specific application.

Kobayashi offer a wide variety of products for instruments used in analysis and measurement of temperature, humidity, wind direction, wind speed, pressure. Kobayashi paper is used for a comprehensive range of applications from weather, medicine, machinery and steel, to chemicals, pharmaceuticals, monitoring and analysis.

We are the distributor of Koyashi Chart Paper, the first company in Japan to produce and sell recording paper.

• Kobayashi
• Sato
• Sekonic
• Isuzu
• Dickson
• Chino
• Hisamatsu

Hyoda (Japan) Waterproof Bimetal Thermometer S6

Hyoda (Japan) Waterproof Bimetal Thermometer M series
Model: M3, M4, M6

Hyoda (Japan) Explosion Proof  (d2G4)Thermometer ES-UT

Hyoda Japan Offers various types of thermometers: highly sensitive Bourdon-tube thermometer, high-output multi-contact thermometer with bellows equipped at pressure receiver, mechatronics type that incorporates an IC (integrated circuit) for transmission of multi-contact local directions and remote electric directions. Use these thermometers for temperature controls in a wide range.

Hyoda (Japan) Thermometer with MicroSwitch Model KME-2, KME-4.

RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy

Anritsu BR series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Aichi Tokei Magnetic Flow Sensors For Liquids with Display

Model NW (Local display type)
Model NW-P (With pulse output)

Anritsu MG series probes are temperature sensors designed for stationary surfaces. Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.

Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Anritsu CS series probes are small surface temperature sensors designed to measure the temperature of stationary surface.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.

Having trouble measuring internal temperature of an object? Anritsu BS series are your best choice as it is able to do so by piercing through the object. It is suitable for semi-solid objects and liquids.

Anritsu BC series probes are internal temperature probes designed to measure the center temperature of food, liquid or semi-solid materials.It is waterproof (IPX5) and can be washed with running water, so you can use it cleanly and hygienically.In order to prevent contamination, the probes designed to prevent the parts falling off.

Depending on the application, it is possible to combine the outside diameter, length, presence of coating of the protective pipe and plug shape.

Anritsu AR-6500 series infrared thermometers are capable of non-contact temperature measurement and come with contact type thermometer functions

The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves

The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).

Watanabe Isolator which outputs DC signal proportional to the input signals (2-output)

Features

• Space-saving and weight-saving by unifying converter and terminal block
• DIN rail mount
• 2 outputs
• Input / Output1 / Output2 / Power supply isolated

Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

Prescale Pressure Film measures and visualizes pressure range. When presure is applied, the micro capsules are broken and the color-forming material reacts with the color-developing material. Red patches appear on the film.

We supplies variety range of recording consumables, such as recording pen, ink ribbon, recording head, cartridge pen, refillable ink and others for recorder and thermohygrograph of various brands, such as:

• ABB Kent
• Dickson
• Hisamatsu
• Isuzu
• Sato
• Sekonic
• Yokogawa

Anritsu UX series is temperature probes suitable for measuring the temperature of moving or rotating surfaces.

Since it has a contact support function, it does not easily shake even if it comes into contact with a moving object, and it is easy to adhere to the object to be measured.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu SC series probes are designed to measure stationary surfaces that can be attached to measurement targets with screws. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.

Specific components may be combined to customize products for the needs of a customer's specific application.

Watanabe Plug-in Compact Signal Converter

he most compact type of plug-in signal converter in Watanabe Electric Industry’s signal converter line.We offer a low-cost, compact type with a socket to easily plug and unplug from the main unit for simpler maintenance.

The product line also includes isolators, distributors (current loop supply), thermocouple converters, RTD converters, and potentiometer converters.

Anritsu SH series probes are ideal for measuring the temperatures of moving or rotating surfaces. The SH series is better suited to small measurement targets than the U series. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu CR Series is a temperature probes for the tips of soldering irons. Select the probe type best-suited to the diameter of your soldering iron tip.

The STEEL CASED EDL Pocket-Probe® Digital Pyrometer is engineered to be durable! It's rugged, reliable, and consistently accurate with repeatable measurements. Pocket-Probe® pyrometers feature full range measurements and offer 0.1° resolution. The instrument is available with an optional shatterproof Lexan window display. 

Perfect for use on the production floor as well as in the lab! The Pocket-Probe® accepts mini-plug terminated sensors of the same thermocouple type. EDL instruments are hand crafted, made in the USA, and constructed from the finest materials available.

Anritsu A series are the ultimate sensor for the surface temperature measurement. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

*This is replacement probe for N series, it is more durable than ever.

At first glance Anritsu U series probe looks simple, but it has many hidden new mechanisms. Frictional heat have a serious adverse effect during measurement of the temperature of the moving surface. The contact-pressure control plate is one of our own techniques to reduce measurement error in such a case. We use a non-fixed support structure to cope with contact friction at the heat-sensing part. Keeping the support in a non-fixed state helps reduce the stress applied to the part, thereby improving durability

Anritsu AX series are the ultimate sensor for the surface temperature measurement: A series, and enhanced it by fitting it with Flexible head. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.

Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.

It is not just a thermometer, it is a Anritsu thermometer with the built in printer! Linear print system is possible high speed and stuck less. You may printout your temperature data anywhere at anytime! The reliable Anritsu AP-450 series corresponds to your application

AP-450 is replacement of AP-800 (AP-800K, AP-800E, AP-850K, AP-850E) series

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy.

Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Aichi Tokei Turbine gas meters TBZ and TBX series, developed to measure gas consumption of a small boiler, an individual furnace, or other individual gas equipment, are achieved to have high accuracy consists with the light-weighted compact stylish body.
They can widely correspond to maximum working pressure and maximum measuring flow-rate.
The built-in 2-systems pulse transmitter allows your configuration of a remote reading system or of an advanced energy management system. Also, TBZ series even offers temperature / pressure compensation function that is to display gas consumption converted to its volume at the standard conditions (0,1 atms ), etc.

EDL offers a complete line of stirred liquid bath calibrators for temperatures from –40 °C up to 550 °C. The Ultra Bath has the highest stability and uniformity possible in any bath. We offer three standard bath models based on the specified temperature range.

Aichi Tokei Ultrasonic Gas Flowmeter

•Robust against oilmist and dust
•Turndown ratio 50:1
•Ultrasonic sensor is integrated
•Negligible pressure drop (equivalent to straight pipe)
•Easy to read LCD which can be oriented at a right angle for easy viewing
•2 outputs for easy integration with other system
•Lower cost than vortex flowmeters or clamp - on type flowmeters
•Options for power supply :
- Built-in batteries (10 years of continuous operation)
- DC power

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.