- Out-of-Stock
BS Series Catalogue
Needle Probe BS Series
911.06KB
Anritsu BS Series Needle Temperature Probes
The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.
- Type K and Type E thermocouple options.
- Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
- Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
- Different insertion lengths, cables and connectors to suit the measurement task.
Anritsu BS Series Needle Temperature Probes
The Anritsu BS Series measures internal temperature in liquids and semi-solid materials. Choose the probe diameter, insertion length and thermocouple configuration to suit the sample and measuring instrument.
Key Features
- Needle probes for insertion and immersion measurement.
- Type K and Type E thermocouple options.
- A choice of probe diameters for different measurement tasks.
- Model-dependent temperature limits and response times.
Compare BS Series Models
The table shows model families; the complete order code also identifies the selected thermocouple, length, cable and connector.
| Model | Probe diameter | Temperature range | Response time* |
|---|---|---|---|
| BS-91 | 0.9 mm | −200 to 300°C | 0.5 s |
| BS-92 | 1.3 mm | −200 to 200°C | 20 s |
| BS-11 | 1.5 mm | −200 to 300°C | 1.5 s |
| BS-12 | 1.9 mm | −200 to 200°C | 20 s |
| BS-21 | 2.1 mm | −200 to 500°C | 2.5 s |
| BS-22 | 2.5 mm | −200 to 200°C | 20 s |
| BS-31 | 3.0 mm | −200 to 500°C | 3 s |
| BS-32 | 3.4 mm | −200 to 200°C | 20 s |
| BS-51 | 5.0 mm | −200 to 500°C | 5 s |
Probe Selection Guide
Model Pictures and Order Codes
Each model below includes its original dimensional drawing and complete Type K and Type E example codes.
BS-21 Needle Probe
| Specification | BS-21 |
|---|---|
|
|
|
| Type K order code | BS-21K-010-TC1-ANP |
| Type E order code | BS-21E-010-TC1-ANP |
| Temperature range | −200 to 500°C |
| Probe diameter | 2.1 mm |
| Response time* | 2.5 s |
BS-31 Needle Probe
| Specification | BS-31 |
|---|---|
|
|
|
| Type K order code | BS-31K-030-TC1-ANP |
| Type E order code | BS-31E-030-TC1-ANP |
| Temperature range | −200 to 500°C |
| Probe diameter | 3.0 mm |
| Response time* | 3 s |
BS-91 Needle Probe
| Specification | BS-91 |
|---|---|
|
|
|
| Type K order code | BS-91K-010-TS1-ANP |
| Type E order code | BS-91E-010-TS1-ANP |
| Temperature range | −200 to 300°C |
| Probe diameter | 0.9 mm |
| Response time* | 0.5 s |
BS-11 Needle Probe
| Specification | BS-11 |
|---|---|
|
|
|
| Type K order code | BS-11K-010-TS1-ANP |
| Type E order code | BS-11E-010-TS1-ANP |
| Temperature range | −200 to 300°C |
| Probe diameter | 1.5 mm |
| Response time* | 1.5 s |
BS-22 Needle Probe
| Specification | BS-22 |
|---|---|
|
|
|
| Type K order code | BS-22K-010-TC1-ANP |
| Type E order code | BS-22E-010-TC1-ANP |
| Temperature range | −200 to 200°C |
| Probe diameter | 2.5 mm |
| Response time* | 20 s |
BS-51 Needle Probe
| Specification | BS-51 |
|---|---|
|
|
|
| Type K order code | BS-51K-100-TC1-ANP |
| Type E order code | BS-51E-100-TC1-ANP |
| Temperature range | −200 to 500°C |
| Probe diameter | 5.0 mm |
| Response time* | 5 s |
Measurement Notes
*Response times refer to 99% response in Anritsu’s boiling-water or vapour test. Actual performance depends on the sample and measurement conditions.
The six complete configurations pictured below have a specified tolerance of ±2.5°C at 100°C. Tolerance varies with temperature; this is not a constant accuracy rating across the entire range.
Temperature limits apply to the sensing section. The grip, cable and plug have separate limits. Confirm the complete assembly for the intended conditions.
How to Choose an Insertion Probe
- Sample and access: describe the material, available insertion depth and space around the measurement point.
- Diameter: balance the need for a small insertion hole against the handling demands. Avoid forcing a fine probe into a hard sample.
- Insertion length: choose enough reach to position the sensing tip at the required depth without exposing the grip to unsuitable conditions.
- Materials and cleaning: check compatibility with the liquid or sample, cleaning chemicals and required hygiene procedure.
- Measurement stability: allow the reading to settle and keep the tip position consistent when comparing samples.
- Instrument compatibility: match the thermocouple type and plug to the thermometer or data logger.
Related Temperature Probes and Instruments
- Anritsu BT Series needle probes — compare the construction and available tip arrangements.
- Anritsu BC Series food temperature probes — review for food measurement tasks.
- Anritsu HR Series handheld thermometers
- Anritsu AM-9000 Series temperature data loggers
Confirm the required input and connector before pairing a probe with an instrument.
Need Help Selecting a BS Series Probe?
Contact Seacom Process Instruments Sdn Bhd with the sample material, temperature range, required probe diameter and insertion length, cable length and instrument model. For a replacement, send the complete probe reference or a photograph of its label.
You might also like
The Anritsu AM-9000 Series records temperature from six or twelve thermocouple channels in one portable instrument. Choose a fixed thermocouple-type model or a flexible multi-input model for temperature and DC-voltage measurement.
- Choice of 6-channel or 12-channel instruments
- Fixed thermocouple-type and multi-input versions
- Supports E, K, J, T and R thermocouples according to model
- 120,000 measurement-data memory
- USB 2.0 Micro-B communication for data transfer
- Battery operation or optional AC adaptor
- Optional AMS-950 software for PC analysis
The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.
- Single-channel handheld thermometer with built-in printer
- Manual, interval and sequential-number printing
- Stores up to 100 measurements for batch printing
- AP-400 supports Type E or K with an ASP connector
- AP-450 supports Type E, K, J, T or R with an ANP connector
- Thermocouple type is selected when ordering and is not switchable
- Powered by four AA batteries or an optional AC adaptor
The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.
- HD-1200 → HR-1200.
- HD-1250 → HR-1250.
- Additional replacements for basic, alarm, LED and memory models.
- Confirm the thermocouple type, probe connector and required functions.
16 other products in the same category:
The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.
- Clip-type design for heat-pipe surface measurement.
- Published configurations cover −50 to 300°C.
- Type K and Type E thermocouple options.
- VA-03, VA-04, VA-05 and VA-06 model options.
The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.
- Six models covering wire diameters from 0.65 mm to 15 mm.
- Type K and Type E thermocouple options.
- Sensing temperature range of −50°C to 250°C.
- Select the cable and connector to suit your measuring instrument.
The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.
- M2, M3, M4 and M5 mounting sizes.
- Type K and Type E thermocouple options.
- Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
- Select the cable length and connector to suit your installation and instrument.
The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.
- AT-10, AT-20, AT-30 and AT-40 models.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
- Grip and no-grip options for AT-30 and AT-40.
- Match the probe connection to your thermometer or data logger.
The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.
- Type K and Type E thermocouple options.
- Different sensing heads and probe geometries.
- Model-specific upper temperature limits from 200°C to 800°C.
- Cable and connector options to match the measuring instrument.
The Anritsu UX Series measures the temperature of moving and rotating surfaces. Its flexible head and contact-support mechanism help maintain contact and reduce shaking during measurement.
- Designed for moving and rotating surface measurements.
- Flexible head with contact support.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 200°C or −50 to 250°C, depending on model.
The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.
- U-100 and U-200 head-size families.
- Guard and wheel configurations for different contact conditions.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
- Select the probe geometry, cable and connector to suit the installation.
The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.
- Self-supporting designs with or without a standard grip.
- Type K and Type E thermocouple options.
- Different head sizes to suit the available contact area.
- Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.
Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.
- Measurement range: 0 to 500°C
- CR-31: for tip diameters below 1.5 mm
- CR-32: for tip diameters from 1.5 to 4 mm
- Type K and Type E models
- CRB base options for connection to compatible thermometers
The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.
- Grip, sleeve and terminal-box configurations.
- Sheath diameters from 0.25 to 8.0 mm.
- Type K and Type E options, depending on configuration.
- SUS316, SUS310S and Inconel sheath options.
- Temperature limits depend on diameter, material and coating.
The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.
- Type K thermocouple probes.
- HHT-4 configuration examples: −50 to 800°C.
- HHT-5 configuration examples: 300 to 1100°C.
- Different probe configurations to suit access to the measurement point.
The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.
- Type K and Type E thermocouple options.
- Published configurations rated to 210°C, 300°C or 500°C.
- Separate BTN spare needles for compatible replaceable-needle models.
- Select the needle design, cable and connector for your measurement setup.
Anritsu ST and STN flat leaf temperature probes feature thin, flexible sensing tapes for attachment to measurement surfaces.
- ST probe assemblies and STN replaceable sensing tapes
- Type K and Type E options, depending on configuration
- Selected versions rated up to 400°C; limits vary by model
- Choice of tape configurations, lengths and instrument connections
- Selection assistance for complete probes and replacement tapes
The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.
- Published model examples cover −100 to 200°C.
- Type K and Type E thermocouple options.
- Suitable for temperature checks and recording with a compatible instrument.
- Confirm the probe, cable and connector specifications when ordering.
Anritsu SF Series fine flexible temperature probes use extra-fine thermocouple wire in a Teflon-coated sheath for internal temperature measurement.
- Flexible construction for positioning in restricted spaces
- Type K and Type E configurations
- Published temperature range: −50 to 200°C
- Model references: SF-K-050, SF-K-100, SF-K-150 and SF-K-200
- Confirm the required length and instrument connector when ordering
The Anritsu SX Series features a flexible head that helps the sensing element maintain contact with the measurement surface.
- Contact-support head accommodates an angle of up to ±4°.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 300°C or −50 to 800°C, depending on model.
- Select the probe configuration, cable and connector to suit your application and instrument.