Magnetic Flow Sensor For Liquids With Display

Aichi Tokei Magnetic Flow Sensors For Liquids with Display

Model NW (Local display type)
Model NW-P (With pulse output)

Features

  • Instantaneous
  • Flow-rate Integrating
  • Flow Volume Flowmeter
  • Built-in lithium batteries (No external power supply is required)
  • Indications of both instantaneous flow-rate and integrating flow volume by only 1 flowmeter
  • Revolving display unit (It can be fixed to a easy-to-read position)
  • Simplified structure with the vane wheel type measuring principle
  • Measurement of various liquids
  • Reset function for indications of Integrating Flow Volume (Total) and Integrating Flow Volume (Trip)
  • Value holding function for Instantaneous Flow-Rate indication
  • Pulse output function (Option)




Instantaneous flow-rate·
Integrating flow volume
flowmeter (with pulse output)
NW-P Type
NW05-NTPNW05-PTPNW05-TTPNW10-NTP
Flow-rate range (m3/h) 0.3 – 3L/min 1.5 – 20L/min
AccuracyFlow-rate indication ±2%RS±0.05L/min ±2%
RS±0.2L/min
Volume indication ±2%RS (with the standard installation position)
Measurable fluids Various liquids (Please select with reference to
the following major materials of the liquid-touching materials)
Max. Working Pressure 1MPa (at the time of fluid temperature of 20°C)
Output signal (for NW-P)
  • Open drain output (Equivalent to open collector)
  • Pulse width: Not less than 5ms
  • Max. rating voltage: 30 VDC
  • Output capacity: “ON resistance” Not more than 150Ω,
    “OFFresistance” Not less than 100kΩ (Remained voltage
    not morethan 1.5V in case of input current not more than 10mA)
Pulse unit (for NW-P) 10mL/p 1L/p
LCDFlow-rateSmallest Scale 0.05L/min 0.2L/min
Display digits 00.00L/min 000.0L/min
VolumeDisplay digits 000000.00L 0000000.0L
Power supply Built-in lithium battery (Battery life 4 years. Not replaceable.)
Connection R1/2
Meter Weight Approx. 280g Approx. 250g





Instantaneous flow-rate
Integrating flow volume
flowmeter NW Type
NW10-PTNNW10-TTNNW20-NTNNW20-PTN
Instantaneous flow-rate·
Integrating flow volume
flowmeter (with pulse output)
NW-P Type
NW10-PTPNW10-TTPNW20-NTPNW20-PTP
Flow-rate range (m3/h) 1.5-20L/min 1.0-10L/min 3.0-60L/min
AccuracyFlow-rate indication ±2%RS±0.2L/min ±2% RS±0.5L/min
Volume indication ±%RS (with the standard installation position)
Measurable fluids Various liquids (Please select with reference to
the following major materials of the liquid-touching materials)
Max. Working Pressure 1MPa (at the time of fluid temperature of 20°C)
Fluid viscosity range 0.5-1.5mPas
Fluid temperature range 0±60°C
Ambient temperature range 0±60°C 35-85%RH(Dew condensation must be avoided)
Output signal (for NW-P)
  • Open drain output (Equivalent to open collector)
  • Pulse width: Not less than 5ms
  • Max. rating voltage: 30 VDC
  • Output capacity: “ON resistance” Not more than 150Ω,
    “OFF resistance” Not less than 100kΩ (Remained voltage
    not more than 1.5V in case of input current not more than 10mA)
Pulse unit (for NW-P) 1L/p
LCDFlow-rateSmallest Scale 0.2L/min 0.5L/min
Display digits 000.0L/min
VolumeDisplay digits 0000000.0L
Power supply Built-in lithium battery (Battery life 4 years. Not replaceable.)
Connection R1/2 R3/4
Meter Weight Approx. 250g Approx. 500g

  • Any installation position other than the standard installation position is not available for NW05-TTN, NW05-TTP, NW10-TTN, and NW10-TTP.
  • *1: The magnet does not touch liquid.


Download


Specific References

You Might Also Like

.

2 other products in the same category:

.

back to top