- Out-of-Stock
WE series Probe
Self Supporting Probes WE Series
2.93MB
Anritsu WE Series Self-Supporting Surface Temperature Probes
The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.
- Self-supporting designs with or without a standard grip.
- Type K and Type E thermocouple options.
- Different head sizes to suit the available contact area.
- Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.
Anritsu WE Series Self-Supporting Surface Temperature Probes
The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target. Select the head size, grip arrangement and temperature rating to suit the available contact area and measuring position.
Key Features
- Self-supporting contact probes for stationary surfaces.
- Type K and Type E thermocouple options.
- Configurations with or without a standard grip.
- Model-dependent temperature limits of 200°C, 250°C or 500°C.
Compare WE Series Models
Head dimensions are shown as diameter × height in millimetres. Check the full drawing for installation clearance.
| Model | Head size (mm) | Grip | Temperature range |
|---|---|---|---|
| WE-11 | Ø20 × 34 | No grip | −50 to 250°C |
| WE-12 | Ø20 × 34 | No grip | −50 to 500°C |
| WE-13 | Ø20 × 39 | Standard grip | −50 to 250°C |
| WE-14 | Ø20 × 39 | Standard grip | −50 to 500°C |
| WE-21 | Ø30 × 34 | No grip | −50 to 250°C |
| WE-22 | Ø30 × 34 | No grip | −50 to 500°C |
| WE-23 | Ø30 × 39 | Standard grip | −50 to 250°C |
| WE-24 | Ø30 × 39 | Standard grip | −50 to 500°C |
| WE-31 | Ø20 × 15 | No grip | −50 to 200°C |
| WE-33 | Ø20 × 15 | Standard grip | −50 to 200°C |
| WE-42 | Ø30 × 23 | No grip | −50 to 500°C |
| WE-44 | Ø30 × 23 | Standard grip | −50 to 500°C |
Probe Construction and Order Code
Confirm the head configuration, thermocouple type, cable length and termination together. The examples below use the manufacturer’s ANP miniature-plug configurations.
Example Order Codes
250°C Models
| Model | Type K example | Type E example |
|---|---|---|
| WE-11 | WE-11K-TS1-ANP | WE-11E-TS1-ANP |
| WE-13 | WE-13K-TS1-ANP | WE-13E-TS1-ANP |
500°C Models
| Model | Type K example | Type E example |
|---|---|---|
| WE-12 | WE-12K-GW1-ANP | WE-12E-GW1-ANP |
| WE-22 | WE-22K-GW1-ANP | WE-22E-GW1-ANP |
| WE-24 | WE-24K-GW1-ANP | WE-24E-GW1-ANP |
| WE-44 | WE-44K-GW1-ANP | WE-44E-GW1-ANP |
200°C Model
| Model | Type K example | Type E example |
|---|---|---|
| WE-33 | WE-33K-TA1-ANP | WE-33E-TA1-ANP |
Performance by Model Group
| Models | Response time* |
|---|---|
| WE-11, WE-12, WE-13, WE-14, WE-21, WE-22, WE-23, WE-24 | 1 second |
| WE-31, WE-33 | 2 seconds |
| WE-42, WE-44 | 2.5 seconds |
*Response is measured to 99% of the true temperature on a flat, smooth metal surface.
The manufacturer specifies ±2.5°C at 100°C surface temperature. Tolerance depends on temperature; 500°C-rated models are specified at ±3.8°C at 500°C. These are test-condition figures, not a guarantee for every installation.
WE probes have a SUS303 stainless-steel body and are listed as repairable. The published durability figure exceeds 50,000 contacts under specified test conditions; it is not a service-life guarantee.
Choosing a WE Probe
- Contact area: provide the usable surface dimensions, flatness and finish. The sensing head must seat consistently.
- Position: confirm that the target can support the probe stably. Review sloping surfaces, vibration and cable pull before selecting a self-supporting arrangement.
- Access: choose the head size and grip to suit the surrounding equipment and handling clearance.
- Temperature: check the maximum surface temperature and the separate limits of the cable and connector.
- Instrument: match Type K or Type E and the plug to the thermometer or data logger.
Original Ordering and Specification Charts
The original charts are retained below for reference. For a replacement or new configuration, confirm the full order code and current specification with Seacom.
WE Series Video
Existing Seacom Model References
| Model / reference | Model / reference |
|---|---|
| WE-11K | WE-12K |
| WE-21K | WE-22K |
| WE-31K | WE-42K |
These are abbreviated references. Include the cable and connector suffix when checking an existing probe.
Related Anritsu Instruments and Probes
- Anritsu HR Series handheld thermometers
- Anritsu AM-9000 Series temperature data loggers
- Anritsu MG Series magnetic surface probes
- Anritsu SC Series screw-mounted surface probes
Confirm probe and instrument compatibility before ordering.
Need Help Selecting a WE Probe?
Contact Seacom Process Instruments Sdn Bhd with the surface material, usable contact area, temperature range, cable length and instrument model. A photograph of the measurement point will help us review the most suitable arrangement.
You might also like
The Anritsu AM-9000 Series records temperature from six or twelve thermocouple channels in one portable instrument. Choose a fixed thermocouple-type model or a flexible multi-input model for temperature and DC-voltage measurement.
- Choice of 6-channel or 12-channel instruments
- Fixed thermocouple-type and multi-input versions
- Supports E, K, J, T and R thermocouples according to model
- 120,000 measurement-data memory
- USB 2.0 Micro-B communication for data transfer
- Battery operation or optional AC adaptor
- Optional AMS-950 software for PC analysis
The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.
- Single-channel handheld thermometer with built-in printer
- Manual, interval and sequential-number printing
- Stores up to 100 measurements for batch printing
- AP-400 supports Type E or K with an ASP connector
- AP-450 supports Type E, K, J, T or R with an ANP connector
- Thermocouple type is selected when ordering and is not switchable
- Powered by four AA batteries or an optional AC adaptor
The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.
- HD-1200 → HR-1200.
- HD-1250 → HR-1250.
- Additional replacements for basic, alarm, LED and memory models.
- Confirm the thermocouple type, probe connector and required functions.
16 other products in the same category:
Anritsu ST and STN flat leaf temperature probes feature thin, flexible sensing tapes for attachment to measurement surfaces.
- ST probe assemblies and STN replaceable sensing tapes
- Type K and Type E options, depending on configuration
- Selected versions rated up to 400°C; limits vary by model
- Choice of tape configurations, lengths and instrument connections
- Selection assistance for complete probes and replacement tapes
The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.
- Setting-type and grip-type configurations.
- Standard and heavy-duty versions.
- Flat and curved guard options, depending on the model.
- Type K and Type E thermocouples.
- Temperature range: −50°C to 250°C.
The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.
- Flexible head helps reduce errors caused by poor surface contact.
- Type K and Type E thermocouple options.
- Published configurations rated to 300°C, 500°C or 800°C.
- Select the probe geometry, cable and connector to suit your measurement setup.
The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.
- U-100 and U-200 head-size families.
- Guard and wheel configurations for different contact conditions.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
- Select the probe geometry, cable and connector to suit the installation.
The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.
- Clip-type design for heat-pipe surface measurement.
- Published configurations cover −50 to 300°C.
- Type K and Type E thermocouple options.
- VA-03, VA-04, VA-05 and VA-06 model options.
The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.
- Type K and Type E thermocouple options.
- Different sensing heads and probe geometries.
- Model-specific upper temperature limits from 200°C to 800°C.
- Cable and connector options to match the measuring instrument.
Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.
- Measurement range: 0 to 500°C
- CR-31: for tip diameters below 1.5 mm
- CR-32: for tip diameters from 1.5 to 4 mm
- Type K and Type E models
- CRB base options for connection to compatible thermometers
The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.
- Type K thermocouple probes.
- HHT-4 configuration examples: −50 to 800°C.
- HHT-5 configuration examples: 300 to 1100°C.
- Different probe configurations to suit access to the measurement point.
The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.
- Type K and Type E thermocouple options.
- Published configurations rated to 210°C, 300°C or 500°C.
- Separate BTN spare needles for compatible replaceable-needle models.
- Select the needle design, cable and connector for your measurement setup.
The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.
- Grip, sleeve and terminal-box configurations.
- Sheath diameters from 0.25 to 8.0 mm.
- Type K and Type E options, depending on configuration.
- SUS316, SUS310S and Inconel sheath options.
- Temperature limits depend on diameter, material and coating.
The Anritsu UX Series measures the temperature of moving and rotating surfaces. Its flexible head and contact-support mechanism help maintain contact and reduce shaking during measurement.
- Designed for moving and rotating surface measurements.
- Flexible head with contact support.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 200°C or −50 to 250°C, depending on model.
The Anritsu CS Series features small sensing heads for contact temperature measurement on stationary surfaces, particularly where space limits the use of larger probes.
- Type K and Type E thermocouple options.
- Head sizes from 3 mm diameter, depending on model.
- −50 to 400°C range for CS-0, CS-1, CS-2 and CS-3 families.
- −50 to 600°C range for the CS-7 family.
- Straight and angled configurations with selectable shaft lengths, cables and connectors.
Select the sensing head and connection to suit the measurement point and thermometer.
The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.
- S-100, S-200 and S-300: stationary surfaces.
- S-400: very small measurement surfaces.
- S-500 and S-600: moving and rotating surfaces.
- S-770 and S-780: self-supporting designs.
- Type K and Type E configurations with model-specific temperature ratings.
The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.
- AT-10, AT-20, AT-30 and AT-40 models.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
- Grip and no-grip options for AT-30 and AT-40.
- Match the probe connection to your thermometer or data logger.
Anritsu SF Series fine flexible temperature probes use extra-fine thermocouple wire in a Teflon-coated sheath for internal temperature measurement.
- Flexible construction for positioning in restricted spaces
- Type K and Type E configurations
- Published temperature range: −50 to 200°C
- Model references: SF-K-050, SF-K-100, SF-K-150 and SF-K-200
- Confirm the required length and instrument connector when ordering
The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.
- M2, M3, M4 and M5 mounting sizes.
- Type K and Type E thermocouple options.
- Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
- Select the cable length and connector to suit your installation and instrument.