Anritsu MG Magnet Probe Anritsu MG Magnet Probe
Anritsu MG Magnet Probe

Magnetic Probe MG Series

Anritsu MG series probes are temperature sensors designed for stationary surfaces. Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.

Model MG series
Type Type K, J, E, R
Accuracy MG-1* : ±1.3°C (at 100°C surface)
MG-2* : ±1.4°C (at 100°C surface)
Response time 2.0 s
Durability rank A
Max. Temp MG-*1 : 250°C
MG-*2 : 400°C



Anritsu MG

Anritsu MG

Type E Model：MG-11E-TS1-ANP
Type K Model：MG-11K-TS1-ANP
Anritsu MG11
Temp.range：-50 to 250°C
Tolerance : ±2.5°C (at 100°C surface)
Response time：2s
Durability : More than 50,000 contacts


Type E Model：MG-64E-GW1-ANP
Type K Model：MG-64K-GW1-ANP
Anritsu MG64
Temp.range：-50 to 400°C
Tolerance : ±2.5°C (at 100°C surface)
Response time：2s
Durability : More than 50,000 contacts


Type E Model：MG-21E-TS1-ANP
Type K Model：MG-21K-TS1-ANP
Anritsu MG21
Temp.range：-50 to 250°C
Tolerance : ±2.5°C (at 100°C surface)
Response time：2s
Durability : More than 50,000 contacts


Type E Model：MG-24E-GW1-ANP
Type K Model：MG-24K-GW1-ANP
Anritsu MG24
Temp.range：-50 to 400°C
Tolerance : ±2.5°C (at 100°C surface)
Response time：2s
Durability : More than 50,000 contacts


Type E Model：MG-33E-TA1-ANP
Type K Model：MG-33K-TA1-ANP
Anritsu MG33
Temp.range：-50 to 250°C
Tolerance : ±2.5°C (at 100°C surface)
Response time：2s
Durability : More than 50,000 contacts


Type E Model：MG-34E-GX1-ANP
Type K Model：MG-34K-GX1-ANP
Anritsu MG34
Temp.range：-50 to 400°C
Tolerance : ±2.5°C (at 100°C surface)
Response time：2s
Durability : More than 50,000 contacts



MG-1*/MG-2*/MG-6*
Model number*1 MG-11
MG-13		 MG-21
MG-23		 MG-22
MG-24		 MG-62
MG-64
Thermocouple type Type E or K
Temp. range*2 -50 to 250°C -50 to 250°C -50 to 400°C -50 to 400°C
Tolerance*3 -50°C ≦ t ≦ 100°C ±2.5°C ±2.5°C ±2.5°C ±2.5°C
100°C < t ≦ 200°C ±3.1°C ±3.1°C ±3.1°C ±3.1°C
200°C < t ≦ 300°C ±4.0°C(less than 250°C) ±4.0°C(less than 250°C) ±5.0°C ±5.0°C
300°C < t ≦ 400°C - - ±7.2°C ±7.2°C
Response time*4 2s
Durability*5 More than 50,000 contacts
Magnetic attraction 700g 400g 400g 650g
Guard materials Teflon - - Glass cloth board with stainless steel cover
Body materials Phenol Resin Teflon Polyimide Sumika super
Repair*6 Repairable


MG-3*
Model number*1 MG-33 MG-34
Thermocouple type Type E or K
Temp. range*2 -50 to 250°C -50 to 400°C
Tolerance*3 -50°C ≦ t ≦ 100°C ±2.5°C ±2.5°C
100°C < t ≦ 200°C ±3.1°C ±3.1°C
200°C < t ≦ 300°C ±4.0°C(less than 250°C) ±5.0°C
300°C < t ≦ 400°C — ±7.2°C
Response time*4 2s
Durability*5 A(More than 50,000 contacts)
Magnetic attraction 340g
Body material Stainless(SUS303) Stainless(SUS303)
Repair*6 Repairable


*1 The asterisk (*) is replaced by the number of the model name you selected. The model number after thermocouple type is omitted.

*2 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target. Note that the operatingtemperature limit is not the same as the allowable temperature limits of the grip, cable, and plug.

*3 Tolerance is available at -50°C or above within the operating temperature on a stationary flat and smooth metal surface.

*4 The response time is the time required to detect 99% of the true value on a flat and smooth metal surface.

*5 Number of contacts enabling measurement within the tolerance range on a flat and smooth metal surface at a temperature of 300°C (or at the operating temperature limit if the operating temperature limit is below 300°C)

*6 Please refer to page repair.


Available models:
MG-11K
MG-12K
MG-21K
MG-22K


Download

  MG Series Catalogue - Magnetic Probe MG Series (1.46M)

Specific References

You Might Also Like

.

Anritsu

Thermo Printer AP400 AP450

It is not just a thermometer, it is a Anritsu thermometer with the built in printer! Linear print system is possible high speed and stuck less. You may printout your temperature data anywhere at anytime! The reliable Anritsu AP-450 series corresponds to your application

AP-450 is replacement of AP-800 (AP-800K, AP-800E, AP-850K, AP-850E) series

Anritsu

Waterproof Thermometer HD1200 series

Anritsu HD series are high accuracy handheld thermometers by Anritsu meter. The high accuracy is realized by adopted the thermocouple material from input plug to cold junction It has automatic standard voltage calibration system, hence achieved high accuracy, high response and high stability. This is the right tool if you are looking for precise temperature measurement!

6, 12 Channels Temperature DataLogger AM-9000 Series
Anritsu

6, 12 Channels Temperature DataLogger AM-9000 Series

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

12 other products in the same category:

.

Low Temperature Probe BR Series
Anritsu

Low Temperature Probe BR Series

Anritsu BR series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Needle Probe for Food BC Series
Anritsu

Needle Probe for Food BC Series

Anritsu BC series probes are internal temperature probes designed to measure the center temperature of food, liquid or semi-solid materials.It is waterproof (IPX5) and can be washed with running water, so you can use it cleanly and hygienically.In order to prevent contamination, the probes designed to prevent the parts falling off.

Depending on the application, it is possible to combine the outside diameter, length, presence of coating of the protective pipe and plug shape.

Anritsu U Rotating Surface Probe
Anritsu

Surface Probe For Moving Surface U Series

At first glance Anritsu U series probe looks simple, but it has many hidden new mechanisms. Frictional heat have a serious adverse effect during measurement of the temperature of the moving surface. The contact-pressure control plate is one of our own techniques to reduce measurement error in such a case. We use a non-fixed support structure to cope with contact friction at the heat-sensing part. Keeping the support in a non-fixed state helps reduce the stress applied to the part, thereby improving durability

Anritsu

Needle Probe BS Series

Having trouble measuring internal temperature of an object? Anritsu BS series are your best choice as it is able to do so by piercing through the object. It is suitable for semi-solid objects and liquids.

Anritsu

Self Supporting Probes WE Series

Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu

Air Temperature Probe AT Series

Anritsu Model AT series probes are Air temperature sensors designed to measure the temperature of Air. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu

Moving Wire Probes MW Series

Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu

Heavy Duty Needle Probe BT Series

Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application

Anritsu

Screw Setting Probes SC Series

Anritsu SC series probes are designed to measure stationary surfaces that can be attached to measurement targets with screws. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu High Superior Surface Probe with Flexible Head SX Series
Anritsu

High Superior Surface Probe with Flexible Head SX Series

Support function of contact with tolerance slope range of ±4 degrees" added to the most accurate Anritsu SX Series.

The flexible head allows the temperature sensing part follows and closely contacts the object to be measured, and it's possible to high accurate measure more easily.

Specific components may be combined to customize products for the needs of a customer's specific application.

Rotating Surface Probe With Flexible Head UX Series
Anritsu

Rotating Surface Probe With Flexible Head UX Series

Anritsu UX series is temperature probes suitable for measuring the temperature of moving or rotating surfaces.

Since it has a contact support function, it does not easily shake even if it comes into contact with a moving object, and it is easy to adhere to the object to be measured.

Specific components may be combined to customize products for the needs of a customer's specific application.

back to top