Cart
Custom content

This is custom content

Active filters

Vaisala Continuous Monitoring System viewLinc
  • Out-of-Stock

Vaisala viewLinc provides continuous monitoring, alarming and reporting for temperature, humidity, CO₂, differential pressure and other critical parameters in GxP-regulated and demanding industrial environments.

  • Supports FDA 21 CFR Part 11 and EU GMP Annex 11 requirements
  • Secure audit trails, access control, alarms and reports
  • Ethernet, PoE, Wi-Fi, VaiNet and Modbus connectivity
  • Scalable from a few monitoring points to thousands
Tokico Flow Meter Malaysia FGB FRO FRP | Seacom
  • Out-of-Stock

The Tokico FGB, FRO and FRP are high-accuracy mechanical positive displacement flow meters for measuring diesel, kerosene, fuel oil, heavy oil, crude palm oil and other compatible industrial liquids.

Available in sizes from 15 to 100 mm, these durable Tokico flow meters provide direct mechanical totalisation, accuracy within ±0.5% and flow capacities ranging from small-volume fuel consumption to large oil-transfer applications.

Tokico electronic oil flowmeter FRL
  • Out-of-Stock

The Tokico FRL and FRY are high-accuracy electronic positive displacement flow meters for diesel, kerosene, fuel oil, heavy oil, lubricating oil, crude palm oil and other compatible industrial liquids.

The Tokico 75 Series combines direct volumetric measurement with a large LCD display and optional pulse, analogue and alarm outputs for local indication and integration with industrial monitoring systems.

Vaisala Indigo520 Supervisor
  • Out-of-Stock

The Vaisala Indigo520 Supervisor manages up to 100 compatible compact humidity and temperature probes through one host unit. It provides local visibility for the maintenance team and Modbus TCP communication for data centre BMS integration.

  • Two daisy chains: Up to 50 probes per chain.
  • 5-inch touchscreen: View measurements, probe status and alerts.
  • Web interface: Supports commissioning and configuration.
  • Malaysia project support: Contact Seacom for probe selection and installation requirements.

Expected availability: early 2027. Enquire with Seacom for configuration and delivery confirmation.

Vaisala HMP110
  • Out-of-Stock

The Vaisala HMP110 is a high-accuracy humidity and temperature probe designed for demanding equipment integration, environmental chambers, data loggers, incubators and controlled-environment applications.

It provides ±1.5% RH accuracy, a 0–100% RH range, −40 °C to +80 °C temperature measurement, a chemically resistant HUMICAP 180R sensor and analog or Modbus RTU output options.

Vaisala Humidity And Temperature Transmitter XMP10
  • Out-of-Stock

The Vaisala XMP10 Series comprises compact humidity and temperature probes offering accuracy levels up to ±1% RH and ±0.1 °C for demanding HVAC, data-centre and critical-environment applications.

The probes feature analog or Modbus RTU outputs, a standard M8 connector, an IP65-rated body and compatibility with Vaisala Origo10 modular HVAC transmitters.

Vaisala HMT370EX Intrinsically Safe Transmitter | Seacom
  • Out-of-Stock

The Vaisala HMT370EX provides intrinsically safe humidity and temperature measurement with HMP-series probes. The new DMP370 configuration combines the HMT370EX transmitter with a DMP37X DRYCAP® probe for low-dew-point measurement in hazardous locations.

  • HMP probes for relative humidity and temperature
  • DMP370 dew-point measurement from −70 to +10 °C Td/f
  • Two two-wire 4–20 mA outputs
  • Certified configurations for hazardous gas and dust areas, up to Zone 0 / 20
  • Detachable probes and traceable calibration

DMP370 availability: Vaisala plans first deliveries for Q1 2027. Contact Seacom for configuration and project lead time.

Humidity Calibrator HMK15
  • Out-of-Stock

The Vaisala HMK15 is a portable, power-free humidity calibrator for checking and adjusting humidity probes and transmitters with saturated salt references.

  • Suitable for laboratory work and on-site humidity checks
  • Supports 11, 33, 75, 85 and 97 %RH nominal reference points
  • Typically stabilises in 10 to 30 minutes when temperatures are equal
  • Certified, ready-dosed salt packages are available
  • Basic and universal chamber lids suit several probe diameters
  • No electrical power or external humidity generator required
Biogas Methane, Carbon Dioxide and Humidity Multigas Probe MGP261
  • Out-of-Stock

The Vaisala MGP262 continuously measures methane slip and carbon dioxide in offgas from biomethane-upgrading processes. Its in-situ design provides direct, always-on measurement without a separate sampling system.

  • Optimised for low-level methane measurement in CO2-rich offgas
  • CH4 measurement range from 0–5 vol-%
  • CO2 measurement range from 0–100 vol-%
  • Heated optical measurement for demanding and humid process conditions
  • Three isolated 4–20 mA outputs and RS-485 Modbus RTU
  • Ex-certified construction for direct installation in hazardous process areas

Ask Seacom about the MGP262

Vaisala DMT340 Dewpoint Transmitter | Replaced by Indigo500 and DMP
  • Out-of-Stock

The Vaisala DMT340 Series provided configurable dew-point and temperature measurement for industrial low-humidity applications. The series is discontinued and replaced by Vaisala Indigo500 transmitters with DMP7 or DMP8 smart probes.

  • Former models: DMT341, DMT342, DMT344, DMT347 and DMT348
  • Designed for dry rooms, industrial dryers, compressed air and process gases
  • Legacy display, data logging, analog, relay and communication options
  • Use DMP7 for compact, wall-mounted or tight-space applications
  • Use DMP8 for pressurised processes and pipelines
  • Pair the selected probe with an Indigo500 transmitter
This website uses cookies to ensure you get the best experience on our website