Anritsu

Anritsu ST and STN flat leaf temperature probes feature thin, flexible sensing tapes for attachment to measurement surfaces.

• ST probe assemblies and STN replaceable sensing tapes
• Type K and Type E options, depending on configuration
• Selected versions rated up to 400°C; limits vary by model
• Choice of tape configurations, lengths and instrument connections
• Selection assistance for complete probes and replacement tapes

Anritsu SF Series fine flexible temperature probes use extra-fine thermocouple wire in a Teflon-coated sheath for internal temperature measurement.

• Flexible construction for positioning in restricted spaces
• Type K and Type E configurations
• Published temperature range: −50 to 200°C
• Model references: SF-K-050, SF-K-100, SF-K-150 and SF-K-200
• Confirm the required length and instrument connector when ordering

Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.

• Measurement range: 0 to 500°C
• CR-31: for tip diameters below 1.5 mm
• CR-32: for tip diameters from 1.5 to 4 mm
• Type K and Type E models
• CRB base options for connection to compatible thermometers

The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.

• Published model examples cover −100 to 200°C.
• Type K and Type E thermocouple options.
• Suitable for temperature checks and recording with a compatible instrument.
• Confirm the probe, cable and connector specifications when ordering.

The Anritsu SX Series features a flexible head that helps the sensing element maintain contact with the measurement surface.

• Contact-support head accommodates an angle of up to ±4°.
• Type K and Type E thermocouple options.
• Published configurations cover −50 to 300°C or −50 to 800°C, depending on model.
• Select the probe configuration, cable and connector to suit your application and instrument.

The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.

• Type K thermocouple probes.
• HHT-4 configuration examples: −50 to 800°C.
• HHT-5 configuration examples: 300 to 1100°C.
• Different probe configurations to suit access to the measurement point.

The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.

• Clip-type design for heat-pipe surface measurement.
• Published configurations cover −50 to 300°C.
• Type K and Type E thermocouple options.
• VA-03, VA-04, VA-05 and VA-06 model options.

The Anritsu BC Series measures internal temperature in food, liquids and semi-solid materials. Its needle design reaches the measurement point inside the sample.

• Designed for food core-temperature measurement.
• IPX5 construction allows washing under running water.
• Type K and Type E thermocouple options.
• Choice of probe diameter, length, protective-pipe coating and connector.

The Anritsu UX Series measures the temperature of moving and rotating surfaces. Its flexible head and contact-support mechanism help maintain contact and reduce shaking during measurement.

• Designed for moving and rotating surface measurements.
• Flexible head with contact support.
• Type K and Type E thermocouple options.
• Published configurations cover −50 to 200°C or −50 to 250°C, depending on model.

The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.

• Flexible head helps reduce errors caused by poor surface contact.
• Type K and Type E thermocouple options.
• Published configurations rated to 300°C, 500°C or 800°C.
• Select the probe geometry, cable and connector to suit your measurement setup.

Anritsu AR-6500 series infrared thermometers are capable of non-contact temperature measurement and come with contact type thermometer functions

The Anritsu FL Series uses fiber optic probes to measure temperature in microwave, high-voltage and strong electromagnetic environments where conventional electrical probes may be unsuitable.

• FL-2000: one measurement channel.
• FL-2400: four measurement channels.
• 0.1°C resolution.
• Probe options for chemicals, intense light, high temperatures and semisolid samples.
• Analog output and RS-232C communication.

Probes are ordered separately. The usable temperature range depends on the selected probe.

The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.

• HD-1200 → HR-1200.
• HD-1250 → HR-1250.
• Additional replacements for basic, alarm, LED and memory models.
• Confirm the thermocouple type, probe connector and required functions.

View the Anritsu HR Series replacement range.

The Anritsu CS Series features small sensing heads for contact temperature measurement on stationary surfaces, particularly where space limits the use of larger probes.

• Type K and Type E thermocouple options.
• Head sizes from 3 mm diameter, depending on model.
• −50 to 400°C range for CS-0, CS-1, CS-2 and CS-3 families.
• −50 to 600°C range for the CS-7 family.
• Straight and angled configurations with selectable shaft lengths, cables and connectors.

Select the sensing head and connection to suit the measurement point and thermometer.

The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.

• Type K and Type E thermocouple options.
• Published configurations rated to 210°C, 300°C or 500°C.
• Separate BTN spare needles for compatible replaceable-needle models.
• Select the needle design, cable and connector for your measurement setup.

The Anritsu ACSII Series provides controlled temperature sources for checking and calibrating surface and insertion temperature probes.

• ACSII-1000: surface calibration from 30 to 300°C.
• ACSII-2000: surface calibration from 30 to 500°C.
• ACSII-3000: internal calibration from 30 to 500°C.
• ACSII-4000: surface and internal calibration from 30 to 500°C.
• PID control with automatic tuning and separate control and calibration units.

Select the model according to probe geometry, required temperature points and calibration requirements.

The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.

• S-100, S-200 and S-300: stationary surfaces.
• S-400: very small measurement surfaces.
• S-500 and S-600: moving and rotating surfaces.
• S-770 and S-780: self-supporting designs.
• Type K and Type E configurations with model-specific temperature ratings.

The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.

• Built-in magnets for secure attachment to magnetically receptive surfaces.
• Type K and Type E thermocouple configurations.
• Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
• Different sensing heads and cable options to suit the installation.

The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.

• Type K and Type E thermocouple options.
• Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
• Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
• Different insertion lengths, cables and connectors to suit the measurement task.

The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.

• Six models covering wire diameters from 0.65 mm to 15 mm.
• Type K and Type E thermocouple options.
• Sensing temperature range of −50°C to 250°C.
• Select the cable and connector to suit your measuring instrument.

The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.

• M2, M3, M4 and M5 mounting sizes.
• Type K and Type E thermocouple options.
• Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
• Select the cable length and connector to suit your installation and instrument.

The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.

• Self-supporting designs with or without a standard grip.
• Type K and Type E thermocouple options.
• Different head sizes to suit the available contact area.
• Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.

The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.

• Setting-type and grip-type configurations.
• Standard and heavy-duty versions.
• Flat and curved guard options, depending on the model.
• Type K and Type E thermocouples.
• Temperature range: −50°C to 250°C.

The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.

• U-100 and U-200 head-size families.
• Guard and wheel configurations for different contact conditions.
• Type K and Type E thermocouple options.
• Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
• Select the probe geometry, cable and connector to suit the installation.

The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.

• Type K and Type E thermocouple options.
• Different sensing heads and probe geometries.
• Model-specific upper temperature limits from 200°C to 800°C.
• Cable and connector options to match the measuring instrument.

The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.

• Grip, sleeve and terminal-box configurations.
• Sheath diameters from 0.25 to 8.0 mm.
• Type K and Type E options, depending on configuration.
• SUS316, SUS310S and Inconel sheath options.
• Temperature limits depend on diameter, material and coating.

The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.

• AT-10, AT-20, AT-30 and AT-40 models.
• Type K and Type E thermocouple options.
• Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
• Grip and no-grip options for AT-30 and AT-40.
• Match the probe connection to your thermometer or data logger.

The Anritsu AM-8000 Series is discontinued and has been replaced by the AM-9000 Series.

For a replacement, select the appropriate channel count, thermocouple input configuration and recording interval.

• 6-channel and 12-channel replacement options.
• Fixed thermocouple-type or multi-input models.
• USB communication and optional AMS-950 analysis software.
• Confirm existing probe, connector and accessory compatibility.

View the Anritsu AM-9000 Series replacement.