- Out-of-Stock
Sheath Series Catalogue
Bendable Wire Probes Sheath Series
768.79KB
Anritsu SHEATH Series Bendable Temperature Probes
The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.
- Grip, sleeve and terminal-box configurations.
- Sheath diameters from 0.25 to 8.0 mm.
- Type K and Type E options, depending on configuration.
- SUS316, SUS310S and Inconel sheath options.
- Temperature limits depend on diameter, material and coating.
Anritsu SHEATH Series Bendable Temperature Probes
The Anritsu SHEATH Series measures internal temperatures in liquids, air and gases. Its bendable sheathed construction helps position the sensing section where a straight probe would be difficult to install.
Key Features
- Grip, sleeve and terminal-box configurations.
- Type K and Type E thermocouple options, subject to sheath size and material.
- Sheath diameters from 0.25 to 8.0 mm.
- SUS316, SUS310S and Inconel material options.
- Grounded, ungrounded and exposed junction configurations.
- Optional fluororesin coating for selected sizes, with a 200°C operating limit.
Choose the Probe Construction
| Form | Construction | Selection consideration |
|---|---|---|
| A | Grip type | For measurements where a handle is useful. |
| B | Sleeve type | For installations requiring a compact transition from sheath to cable. |
| C | Terminal box type | For installations using a terminal-box connection. |
| AH / BH / CH | Corresponding fluororesin-coated forms | Check coating compatibility, diameter and temperature limit. |
Maximum Sheath Temperature by Diameter
Use the rating for the exact thermocouple type, diameter and sheath material. A higher rating elsewhere in the range does not apply to every configuration.
| Diameter (mm) | Type K: SUS316 / SUS310S (°C) | Type K: Inconel (°C) | Type E: SUS316 (°C) |
|---|---|---|---|
| 0.25 | — | 500 | — |
| 0.5 | — | 500 | — |
| 1.0 | 650 | 650 | 650 |
| 1.6 | 650 | 650 | 650 |
| 3.2 | 750 | 750 | 750 |
| 4.8 | 800 | 900 | 800 |
| 6.4 | 800 | 1000 | 800 |
| 8.0 | 900 | 1050 | 800 |
“—” means the combination is not listed. Fluororesin-coated probes are limited to 200°C. The cable, handle, sleeve, terminal box and connector must remain within their own operating limits.
Example Configurations
These complete examples illustrate different constructions. Confirm the full configuration before ordering.
| Type K example | Type E example | Temperature range |
|---|---|---|
| A1.6-K-J1-M1-L300-TC1-ANP | A1.6-E-J1-M1-L300-TC1-ANP | −40 to 650°C |
| B0.5-K-J1-M3-L100-TS1-ANP | Not available in this size | −40 to 500°C |
| B1.0-K-J1-M1-L200-TC1-ANP | B1.0-E-J1-M1-L200-TC1-ANP | −40 to 650°C |
| B1.6-K-J2-M1-L500-TC1-ANP | B1.6-E-J2-M1-L500-TC1-ANP | −40 to 650°C |
| BH1.0-K-J1-M1-L1000-TC1-ANP | BH1.0-E-J1-M1-L1000-TC1-ANP | −40 to 200°C |
| C6.4-K-J1-M1-L500-TC1-ANP | C6.4-E-J1-M1-L500-TC1-ANP | −40 to 800°C |
Junction Options
| Code | Junction |
|---|---|
| J1 | Grounded |
| J2 | Ungrounded |
| J3 | Exposed |
Select the junction to suit the electrical arrangement, measurement medium and required response. Confirm suitability where electrical isolation or exposure to the process is a concern.
Order Code and Configuration
| Order-code element | Options / meaning |
|---|---|
| Form | A, B or C; AH, BH or CH for coated versions |
| Diameter | 0.25, 0.5, 1.0, 1.6, 3.2, 4.8, 6.4 or 8.0 mm |
| Thermocouple | K or E, subject to configuration |
| Junction | J1 grounded, J2 ungrounded or J3 exposed |
| Sheath material | M1: SUS316; M2: SUS310S; M3: Inconel |
| Sheath length | L100 = 100 mm; L200 = 200 mm; specify the required length |
| Cable | TC or TS according to configuration |
| Cable length | 1 = 1 m; specify the required length |
| Connection | ANP miniature plug, ASP standard plug, W without plug; other terminations by enquiry |
M2 and M3 are Type K options. The 0.25 and 0.5 mm sizes use Type K with Inconel. Check all requested combinations before placing an order.
Response Time and Resistance
| Diameter (mm) | Listed response (s) | Type K resistance (Ω/m) | Type E resistance (Ω/m) |
|---|---|---|---|
| 0.25 | 0.4 | 570 | — |
| 0.5 | 0.9 | 124 | — |
| 1.0 | 2 | 32 | 38 |
| 1.6 | 3 | 13 | 15 |
| 3.2 | 5 | 4 | 5 |
| 4.8 | 10 | 2.2 | 2.6 |
| 6.4 | 15 | 1 | 1.2 |
| 8.0 | 20 | 0.7 | 0.9 |
Response figures are Anritsu’s published values; actual settling time depends on the medium and installation. Check the combined sheath and cable resistance against the measuring instrument’s allowable source resistance.
The published thermocouple tolerance is ±2.5°C from −40°C to below 333°C, then ±0.75% of the absolute temperature in °C within the applicable tolerance range. This does not extend the temperature rating of the selected sheath.
Installation and Selection Notes
- Bending: Anritsu specifies a sheath bending radius of five times its outside diameter. Confirm the bending requirements for a coated configuration.
- Medium: check chemical compatibility and the suitability of the junction and sheath for the liquid or gas.
- Molten aluminium: do not immerse these probes in molten aluminium; it can corrode the sheath.
- Instrument: match thermocouple type, connection and input range to the thermometer or data logger.
- Installation: provide the required insertion length, mounting arrangement and process conditions when requesting a quotation.
Existing Model References
The references below retain the configurations listed on the Seacom page. They omit cable and connector details, so a complete order code must be confirmed. Listing a reference does not indicate stock availability.
SUS316 Type K References
| Grounded junction reference | Ungrounded junction reference |
|---|---|
| A1.0-K-J1-M1-L100 | A1.0-K-J2-M1-L100 |
| A1.0-K-J1-M1-L200 | A1.0-K-J2-M1-L200 |
| A1.0-K-J1-M1-L300 | A1.0-K-J2-M1-L300 |
| A1.0-K-J1-M1-L400 | A1.0-K-J2-M1-L400 |
| A1.0-K-J1-M1-L500 | A1.0-K-J2-M1-L500 |
| A1.0-K-J1-M1-L1000 | A1.0-K-J2-M1-L1000 |
| A1.6-K-J1-M1-L100 | A1.6-K-J2-M1-L100 |
| A1.6-K-J1-M1-L200 | A1.6-K-J2-M1-L200 |
| A1.6-K-J1-M1-L300 | A1.6-K-J2-M1-L300 |
| A1.6-K-J1-M1-L400 | A1.6-K-J2-M1-L400 |
| A1.6-K-J1-M1-L500 | A1.6-K-J2-M1-L500 |
| A1.6-K-J1-M1-L1000 | A1.6-K-J2-M1-L1000 |
| A3.2-K-J1-M1-L100 | A3.2-K-J2-M1-L100 |
| A3.2-K-J1-M1-L200 | A3.2-K-J2-M1-L200 |
| A3.2-K-J1-M1-L300 | A3.2-K-J2-M1-L300 |
| A3.2-K-J1-M1-L400 | A3.2-K-J2-M1-L400 |
| A3.2-K-J1-M1-L500 | A3.2-K-J2-M1-L500 |
| A3.2-K-J1-M1-L1000 | A3.2-K-J2-M1-L1000 |
| A4.8-K-J1-M1-L100 | A4.8-K-J2-M1-L100 |
| A4.8-K-J1-M1-L200 | A4.8-K-J2-M1-L200 |
| A4.8-K-J1-M1-L300 | A4.8-K-J2-M1-L300 |
| A4.8-K-J1-M1-L400 | A4.8-K-J2-M1-L400 |
| A4.8-K-J1-M1-L500 | A4.8-K-J2-M1-L500 |
| A4.8-K-J1-M1-L1000 | A4.8-K-J2-M1-L1000 |
| A6.4-K-J1-M1-L100 | A6.4-K-J2-M1-L100 |
| A6.4-K-J1-M1-L200 | A6.4-K-J2-M1-L200 |
| A6.4-K-J1-M1-L300 | A6.4-K-J2-M1-L300 |
| A6.4-K-J1-M1-L400 | A6.4-K-J2-M1-L400 |
| A6.4-K-J1-M1-L500 | A6.4-K-J2-M1-L500 |
| A6.4-K-J1-M1-L1000 | A6.4-K-J2-M1-L1000 |
| A8.0-K-J1-M1-L100 | A8.0-K-J2-M1-L100 |
| A8.0-K-J1-M1-L200 | A8.0-K-J2-M1-L200 |
| A8.0-K-J1-M1-L300 | A8.0-K-J2-M1-L300 |
| A8.0-K-J1-M1-L400 | A8.0-K-J2-M1-L400 |
| A8.0-K-J1-M1-L500 | A8.0-K-J2-M1-L500 |
| A8.0-K-J1-M1-L1000 | A8.0-K-J2-M1-L1000 |
SUS310S Type K References
| Grounded junction reference | Ungrounded junction reference |
|---|---|
| A1.0-K-J1-M2-L100 | A1.0-K-J2-M2-L100 |
| A1.0-K-J1-M2-L200 | A1.0-K-J2-M2-L200 |
| A1.0-K-J1-M2-L300 | A1.0-K-J2-M2-L300 |
| A1.0-K-J1-M2-L400 | A1.0-K-J2-M2-L400 |
| A1.0-K-J1-M2-L500 | A1.0-K-J2-M2-L500 |
| A1.0-K-J1-M2-L1000 | A1.0-K-J2-M2-L1000 |
| A1.6-K-J1-M2-L100 | A1.6-K-J2-M2-L100 |
| A1.6-K-J1-M2-L200 | A1.6-K-J2-M2-L200 |
| A1.6-K-J1-M2-L300 | A1.6-K-J2-M2-L300 |
| A1.6-K-J1-M2-L400 | A1.6-K-J2-M2-L400 |
| A1.6-K-J1-M2-L500 | A1.6-K-J2-M2-L500 |
| A1.6-K-J1-M2-L1000 | A1.6-K-J2-M2-L1000 |
| A3.2-K-J1-M2-L100 | A3.2-K-J2-M2-L100 |
| A3.2-K-J1-M2-L200 | A3.2-K-J2-M2-L200 |
| A3.2-K-J1-M2-L300 | A3.2-K-J2-M2-L300 |
| A3.2-K-J1-M2-L400 | A3.2-K-J2-M2-L400 |
| A3.2-K-J1-M2-L500 | A3.2-K-J2-M2-L500 |
| A3.2-K-J1-M2-L1000 | A3.2-K-J2-M2-L1000 |
| A4.8-K-J1-M2-L100 | A4.8-K-J2-M2-L100 |
| A4.8-K-J1-M2-L200 | A4.8-K-J2-M2-L200 |
| A4.8-K-J1-M2-L300 | A4.8-K-J2-M2-L300 |
| A4.8-K-J1-M2-L400 | A4.8-K-J2-M2-L400 |
| A4.8-K-J1-M2-L500 | A4.8-K-J2-M2-L500 |
| A4.8-K-J1-M2-L1000 | A4.8-K-J2-M2-L1000 |
| A6.4-K-J1-M2-L100 | A6.4-K-J2-M2-L100 |
| A6.4-K-J1-M2-L200 | A6.4-K-J2-M2-L200 |
| A6.4-K-J1-M2-L300 | A6.4-K-J2-M2-L300 |
| A6.4-K-J1-M2-L400 | A6.4-K-J2-M2-L400 |
| A6.4-K-J1-M2-L500 | A6.4-K-J2-M2-L500 |
| A6.4-K-J1-M2-L1000 | A6.4-K-J2-M2-L1000 |
| A8.0-K-J1-M2-L100 | A8.0-K-J2-M2-L100 |
| A8.0-K-J1-M2-L200 | A8.0-K-J2-M2-L200 |
| A8.0-K-J1-M2-L300 | A8.0-K-J2-M2-L300 |
| A8.0-K-J1-M2-L400 | A8.0-K-J2-M2-L400 |
| A8.0-K-J1-M2-L500 | A8.0-K-J2-M2-L500 |
| A8.0-K-J1-M2-L1000 | A8.0-K-J2-M2-L1000 |
Inconel Type K References
| Grounded junction reference | Ungrounded junction reference |
|---|---|
| A0.25-K-J1-M3-L100 | A0.25-K-J2-M3-L100 |
| A0.25-K-J1-M3-L200 | A0.25-K-J2-M3-L200 |
| A0.25-K-J1-M3-L300 | A0.25-K-J2-M3-L300 |
| A0.25-K-J1-M3-L400 | A0.25-K-J2-M3-L400 |
| A0.25-K-J1-M3-L500 | A0.25-K-J2-M3-L500 |
| A0.25-K-J1-M3-L1000 | A0.25-K-J2-M3-L1000 |
| A0.5-K-J1-M3-L100 | A0.5-K-J2-M3-L100 |
| A0.5-K-J1-M3-L200 | A0.5-K-J2-M3-L200 |
| A0.5-K-J1-M3-L300 | A0.5-K-J2-M3-L300 |
| A0.5-K-J1-M3-L400 | A0.5-K-J2-M3-L400 |
| A0.5-K-J1-M3-L500 | A0.5-K-J2-M3-L500 |
| A0.5-K-J1-M3-L1000 | A0.5-K-J2-M3-L1000 |
| A1.0-K-J1-M3-L100 | A1.0-K-J2-M3-L100 |
| A1.0-K-J1-M3-L200 | A1.0-K-J2-M3-L200 |
| A1.0-K-J1-M3-L300 | A1.0-K-J2-M3-L300 |
| A1.0-K-J1-M3-L400 | A1.0-K-J2-M3-L400 |
| A1.0-K-J1-M3-L500 | A1.0-K-J2-M3-L500 |
| A1.0-K-J1-M3-L1000 | A1.0-K-J2-M3-L1000 |
| A1.6-K-J1-M3-L100 | A1.6-K-J2-M3-L100 |
| A1.6-K-J1-M3-L200 | A1.6-K-J2-M3-L200 |
| A1.6-K-J1-M3-L300 | A1.6-K-J2-M3-L300 |
| A1.6-K-J1-M3-L400 | A1.6-K-J2-M3-L400 |
| A1.6-K-J1-M3-L500 | A1.6-K-J2-M3-L500 |
| A1.6-K-J1-M3-L1000 | A1.6-K-J2-M3-L1000 |
| A3.2-K-J1-M3-L100 | A3.2-K-J2-M3-L100 |
| A3.2-K-J1-M3-L200 | A3.2-K-J2-M3-L200 |
| A3.2-K-J1-M3-L300 | A3.2-K-J2-M3-L300 |
| A3.2-K-J1-M3-L400 | A3.2-K-J2-M3-L400 |
| A3.2-K-J1-M3-L500 | A3.2-K-J2-M3-L500 |
| A3.2-K-J1-M3-L1000 | A3.2-K-J2-M3-L1000 |
| A4.8-K-J1-M3-L100 | A4.8-K-J2-M3-L100 |
| A4.8-K-J1-M3-L200 | A4.8-K-J2-M3-L200 |
| A4.8-K-J1-M3-L300 | A4.8-K-J2-M3-L300 |
| A4.8-K-J1-M3-L400 | A4.8-K-J2-M3-L400 |
| A4.8-K-J1-M3-L500 | A4.8-K-J2-M3-L500 |
| A4.8-K-J1-M3-L1000 | A4.8-K-J2-M3-L1000 |
| A6.4-K-J1-M3-L100 | A6.4-K-J2-M3-L100 |
| A6.4-K-J1-M3-L200 | A6.4-K-J2-M3-L200 |
| A6.4-K-J1-M3-L300 | A6.4-K-J2-M3-L300 |
| A6.4-K-J1-M3-L400 | A6.4-K-J2-M3-L400 |
| A6.4-K-J1-M3-L500 | A6.4-K-J2-M3-L500 |
| A6.4-K-J1-M3-L1000 | A6.4-K-J2-M3-L1000 |
| A8.0-K-J1-M3-L100 | A8.0-K-J2-M3-L100 |
| A8.0-K-J1-M3-L200 | A8.0-K-J2-M3-L200 |
| A8.0-K-J1-M3-L300 | A8.0-K-J2-M3-L300 |
| A8.0-K-J1-M3-L400 | A8.0-K-J2-M3-L400 |
| A8.0-K-J1-M3-L500 | A8.0-K-J2-M3-L500 |
| A8.0-K-J1-M3-L1000 | A8.0-K-J2-M3-L1000 |
Related Anritsu Temperature Instruments
- Anritsu SF Series fine flexible probes
- Anritsu BS Series needle probes
- Anritsu HR Series handheld thermometers
Confirm input type and connector compatibility before pairing a probe with an instrument.
Need Help Selecting a SHEATH Probe?
Contact Seacom Process Instruments Sdn Bhd with the measurement medium, operating temperature, sheath diameter and length, junction preference, cable length and thermometer model. For a replacement, include the complete existing order code or a clear photograph of its label.
You might also like
The Anritsu AM-9000 Series records temperature from six or twelve thermocouple channels in one portable instrument. Choose a fixed thermocouple-type model or a flexible multi-input model for temperature and DC-voltage measurement.
- Choice of 6-channel or 12-channel instruments
- Fixed thermocouple-type and multi-input versions
- Supports E, K, J, T and R thermocouples according to model
- 120,000 measurement-data memory
- USB 2.0 Micro-B communication for data transfer
- Battery operation or optional AC adaptor
- Optional AMS-950 software for PC analysis
The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.
- Single-channel handheld thermometer with built-in printer
- Manual, interval and sequential-number printing
- Stores up to 100 measurements for batch printing
- AP-400 supports Type E or K with an ASP connector
- AP-450 supports Type E, K, J, T or R with an ANP connector
- Thermocouple type is selected when ordering and is not switchable
- Powered by four AA batteries or an optional AC adaptor
The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.
- HD-1200 → HR-1200.
- HD-1250 → HR-1250.
- Additional replacements for basic, alarm, LED and memory models.
- Confirm the thermocouple type, probe connector and required functions.
16 other products in the same category:
The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.
- Type K thermocouple probes.
- HHT-4 configuration examples: −50 to 800°C.
- HHT-5 configuration examples: 300 to 1100°C.
- Different probe configurations to suit access to the measurement point.
The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.
- Flexible head helps reduce errors caused by poor surface contact.
- Type K and Type E thermocouple options.
- Published configurations rated to 300°C, 500°C or 800°C.
- Select the probe geometry, cable and connector to suit your measurement setup.
The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.
- Clip-type design for heat-pipe surface measurement.
- Published configurations cover −50 to 300°C.
- Type K and Type E thermocouple options.
- VA-03, VA-04, VA-05 and VA-06 model options.
The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.
- Type K and Type E thermocouple options.
- Different sensing heads and probe geometries.
- Model-specific upper temperature limits from 200°C to 800°C.
- Cable and connector options to match the measuring instrument.
The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.
- AT-10, AT-20, AT-30 and AT-40 models.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
- Grip and no-grip options for AT-30 and AT-40.
- Match the probe connection to your thermometer or data logger.
The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.
- Built-in magnets for secure attachment to magnetically receptive surfaces.
- Type K and Type E thermocouple configurations.
- Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
- Different sensing heads and cable options to suit the installation.
The Anritsu BC Series measures internal temperature in food, liquids and semi-solid materials. Its needle design reaches the measurement point inside the sample.
- Designed for food core-temperature measurement.
- IPX5 construction allows washing under running water.
- Type K and Type E thermocouple options.
- Choice of probe diameter, length, protective-pipe coating and connector.
The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.
- M2, M3, M4 and M5 mounting sizes.
- Type K and Type E thermocouple options.
- Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
- Select the cable length and connector to suit your installation and instrument.
The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.
- Published model examples cover −100 to 200°C.
- Type K and Type E thermocouple options.
- Suitable for temperature checks and recording with a compatible instrument.
- Confirm the probe, cable and connector specifications when ordering.
The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.
- Setting-type and grip-type configurations.
- Standard and heavy-duty versions.
- Flat and curved guard options, depending on the model.
- Type K and Type E thermocouples.
- Temperature range: −50°C to 250°C.
The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.
- U-100 and U-200 head-size families.
- Guard and wheel configurations for different contact conditions.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
- Select the probe geometry, cable and connector to suit the installation.
The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.
- Six models covering wire diameters from 0.65 mm to 15 mm.
- Type K and Type E thermocouple options.
- Sensing temperature range of −50°C to 250°C.
- Select the cable and connector to suit your measuring instrument.
The Anritsu CS Series features small sensing heads for contact temperature measurement on stationary surfaces, particularly where space limits the use of larger probes.
- Type K and Type E thermocouple options.
- Head sizes from 3 mm diameter, depending on model.
- −50 to 400°C range for CS-0, CS-1, CS-2 and CS-3 families.
- −50 to 600°C range for the CS-7 family.
- Straight and angled configurations with selectable shaft lengths, cables and connectors.
Select the sensing head and connection to suit the measurement point and thermometer.
Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.
- Measurement range: 0 to 500°C
- CR-31: for tip diameters below 1.5 mm
- CR-32: for tip diameters from 1.5 to 4 mm
- Type K and Type E models
- CRB base options for connection to compatible thermometers
The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.
- Type K and Type E thermocouple options.
- Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
- Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
- Different insertion lengths, cables and connectors to suit the measurement task.
The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.
- Type K and Type E thermocouple options.
- Published configurations rated to 210°C, 300°C or 500°C.
- Separate BTN spare needles for compatible replaceable-needle models.
- Select the needle design, cable and connector for your measurement setup.