- Out-of-Stock
BR Series Catalogue
Low Temperature Probe BR
681.98KB
Anritsu BR Series Low-Temperature Probes
The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.
- Published model examples cover −100 to 200°C.
- Type K and Type E thermocouple options.
- Suitable for temperature checks and recording with a compatible instrument.
- Confirm the probe, cable and connector specifications when ordering.
Anritsu BR Series Low-Temperature Probes
Anritsu BR Series temperature probes are designed for measurements inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration and instrument connection to suit the equipment and the temperature you need to measure.
- Published measurement range of −100 to 200°C for the manufacturer’s illustrated configurations
- Type K and Type E thermocouple options
- Configuration choices for different measurement arrangements
- For use with a compatible thermometer or temperature data logger
Specifications
| Parameter | Details |
|---|---|
| Measurement range | −100 to 200°C for the published BR-01 and BR-10 examples |
| Thermocouple options | Type K or Type E |
| Published tolerance | ±2.5°C at 100°C for the illustrated configurations |
| Published response time | 1.5 seconds under the manufacturer’s test conditions |
| Example Type K references | BR-01K-1-TS1-ANP, BR-10K-1-TS1-ANP, BR-01K-0-TS1-ANP and BR-10K-0-TS1-ANP |
| Instrument connection | Match the thermocouple input and connector to the selected thermometer or logger |
The tolerance quoted at 100°C is not a specification for the entire measurement range. Confirm accuracy at your operating temperature, together with the separate temperature limits of the cable and connector. Response in air or inside equipment will depend on the installation conditions.
Probe Construction and Ordering Information
Model References
The following grouped Type K references retain the entries in Seacom’s catalogue. The ～ symbol indicates a range of reference numbers, rather than a complete individual ordering code. Confirm the exact probe number, suffix, cable and connector before ordering.
| Model reference | Model reference | Model reference |
|---|---|---|
| BR-01～05K-0 | BR-01～05K-1 | BR-01～05K-2 |
| BR-01～05K-3 | BR-01～05K-4 | BR-01～05K-5 |
| BR-06～10K-0 | BR-06～10K-1 | BR-06～10K-2 |
| BR-06～10K-3 | BR-06～10K-4 | BR-06～10K-5 |
| BR-11～15K-0 | BR-11～15K-1 | BR-11～15K-2 |
| BR-11～15K-3 | BR-11～15K-4 | BR-11～15K-5 |
| BR-16～20K-0 | BR-16～20K-1 | BR-16～20K-2 |
| BR-16～20K-3 | BR-16～20K-4 | BR-16～20K-5 |
| BR-21～25K-0 | BR-21～25K-1 | BR-21～25K-2 |
| BR-21～25K-3 | BR-21～25K-4 | BR-21～25K-5 |
| BR-26～30K-0 | BR-26～30K-1 | BR-26～30K-2 |
| BR-26～30K-3 | BR-26～30K-4 | BR-26～30K-5 |
| BR-31～35K-0 | BR-31～35K-1 | BR-31～35K-2 |
| BR-31～35K-3 | BR-31～35K-4 | BR-31～35K-5 |
| BR-36～40K-0 | BR-36～40K-1 | BR-36～40K-2 |
| BR-36～40K-3 | BR-36～40K-4 | BR-36～40K-5 |
| BR-41～45K-0 | BR-41～45K-1 | BR-41～45K-2 |
| BR-41～45K-3 | BR-41～45K-4 | BR-41～45K-5 |
| BR-46～50K-0 | BR-46～50K-1 | BR-46～50K-2 |
| BR-46～50K-3 | BR-46～50K-4 | BR-46～50K-5 |
| BR-51～55K-0 | BR-51～55K-1 | BR-51～55K-2 |
| BR-51～55K-3 | BR-51～55K-4 | BR-51～55K-5 |
| BR-56～60K-0 | BR-56～60K-1 | BR-56～60K-2 |
| BR-56～60K-3 | BR-56～60K-4 | BR-56～60K-5 |
| BR-61～65K-0 | BR-61～65K-1 | BR-61～65K-2 |
| BR-61～65K-3 | BR-61～65K-4 | BR-61～65K-5 |
| BR-66～70K-0 | BR-66～70K-1 | BR-66～70K-2 |
| BR-66～70K-3 | BR-66～70K-4 | BR-66～70K-5 |
| BR-71～75K-0 | BR-71～75K-1 | BR-71～75K-2 |
| BR-71～75K-3 | BR-71～75K-4 | BR-71～75K-5 |
| BR-76～80K-0 | BR-76～80K-1 | BR-76～80K-2 |
| BR-76～80K-3 | BR-76～80K-4 | BR-76～80K-5 |
| BR-81～85K-0 | BR-81～85K-1 | BR-81～85K-2 |
| BR-81～85K-3 | BR-81～85K-4 | BR-81～85K-5 |
| BR-86～90K-0 | BR-86～90K-1 | BR-86～90K-2 |
| BR-86～90K-3 | BR-86～90K-4 | BR-86～90K-5 |
| BR-91～95K-0 | BR-91～95K-1 | BR-91～95K-2 |
| BR-91～95K-3 | BR-91～95K-4 | BR-91～95K-5 |
| BR-96～99K-0 | BR-96～99K-1 | BR-96～99K-2 |
| BR-96～99K-3 | BR-96～99K-4 | BR-96～99K-5 |
Selecting a Probe for Your Equipment
- Temperature: specify normal conditions and the lowest and highest expected temperatures.
- Measurement point: explain whether you need to measure chamber air, a sample or another target.
- Installation: provide the available access, required reach and cable-routing arrangement.
- Instrument: confirm the thermometer or logger model, thermocouple type and connector.
- Recording: tell us whether you need occasional readings or measurements saved over time.
Related Anritsu Instruments and Probes
- HR Series handheld thermometers — for portable temperature checks with a compatible probe configuration.
- AM-9000 Series temperature data loggers — for multi-point recording with suitable inputs and connections.
- AT Series air temperature probes — compare when air temperature is the main measurement requirement.
- SF Series fine flexible probes — compare where flexible sensor positioning is required.
Need Help Selecting a BR Probe?
Send Seacom your equipment type, temperature range, measurement location and instrument model. For replacement enquiries, include the existing probe code or a photograph, required length and quantity.
You might also like
The Anritsu AM-9000 Series records temperature from six or twelve thermocouple channels in one portable instrument. Choose a fixed thermocouple-type model or a flexible multi-input model for temperature and DC-voltage measurement.
- Choice of 6-channel or 12-channel instruments
- Fixed thermocouple-type and multi-input versions
- Supports E, K, J, T and R thermocouples according to model
- 120,000 measurement-data memory
- USB 2.0 Micro-B communication for data transfer
- Battery operation or optional AC adaptor
- Optional AMS-950 software for PC analysis
The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.
- Single-channel handheld thermometer with built-in printer
- Manual, interval and sequential-number printing
- Stores up to 100 measurements for batch printing
- AP-400 supports Type E or K with an ASP connector
- AP-450 supports Type E, K, J, T or R with an ANP connector
- Thermocouple type is selected when ordering and is not switchable
- Powered by four AA batteries or an optional AC adaptor
The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.
- HD-1200 → HR-1200.
- HD-1250 → HR-1250.
- Additional replacements for basic, alarm, LED and memory models.
- Confirm the thermocouple type, probe connector and required functions.
16 other products in the same category:
The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.
- Type K and Type E thermocouple options.
- Different sensing heads and probe geometries.
- Model-specific upper temperature limits from 200°C to 800°C.
- Cable and connector options to match the measuring instrument.
The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.
- S-100, S-200 and S-300: stationary surfaces.
- S-400: very small measurement surfaces.
- S-500 and S-600: moving and rotating surfaces.
- S-770 and S-780: self-supporting designs.
- Type K and Type E configurations with model-specific temperature ratings.
The Anritsu SX Series features a flexible head that helps the sensing element maintain contact with the measurement surface.
- Contact-support head accommodates an angle of up to ±4°.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 300°C or −50 to 800°C, depending on model.
- Select the probe configuration, cable and connector to suit your application and instrument.
The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.
- Type K thermocouple probes.
- HHT-4 configuration examples: −50 to 800°C.
- HHT-5 configuration examples: 300 to 1100°C.
- Different probe configurations to suit access to the measurement point.
The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.
- Setting-type and grip-type configurations.
- Standard and heavy-duty versions.
- Flat and curved guard options, depending on the model.
- Type K and Type E thermocouples.
- Temperature range: −50°C to 250°C.
The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.
- AT-10, AT-20, AT-30 and AT-40 models.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
- Grip and no-grip options for AT-30 and AT-40.
- Match the probe connection to your thermometer or data logger.
Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.
- Measurement range: 0 to 500°C
- CR-31: for tip diameters below 1.5 mm
- CR-32: for tip diameters from 1.5 to 4 mm
- Type K and Type E models
- CRB base options for connection to compatible thermometers
The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.
- Self-supporting designs with or without a standard grip.
- Type K and Type E thermocouple options.
- Different head sizes to suit the available contact area.
- Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.
The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.
- Built-in magnets for secure attachment to magnetically receptive surfaces.
- Type K and Type E thermocouple configurations.
- Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
- Different sensing heads and cable options to suit the installation.
The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.
- Clip-type design for heat-pipe surface measurement.
- Published configurations cover −50 to 300°C.
- Type K and Type E thermocouple options.
- VA-03, VA-04, VA-05 and VA-06 model options.
Anritsu ST and STN flat leaf temperature probes feature thin, flexible sensing tapes for attachment to measurement surfaces.
- ST probe assemblies and STN replaceable sensing tapes
- Type K and Type E options, depending on configuration
- Selected versions rated up to 400°C; limits vary by model
- Choice of tape configurations, lengths and instrument connections
- Selection assistance for complete probes and replacement tapes
The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.
- Type K and Type E thermocouple options.
- Published configurations rated to 210°C, 300°C or 500°C.
- Separate BTN spare needles for compatible replaceable-needle models.
- Select the needle design, cable and connector for your measurement setup.
Anritsu SF Series fine flexible temperature probes use extra-fine thermocouple wire in a Teflon-coated sheath for internal temperature measurement.
- Flexible construction for positioning in restricted spaces
- Type K and Type E configurations
- Published temperature range: −50 to 200°C
- Model references: SF-K-050, SF-K-100, SF-K-150 and SF-K-200
- Confirm the required length and instrument connector when ordering
The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.
- Grip, sleeve and terminal-box configurations.
- Sheath diameters from 0.25 to 8.0 mm.
- Type K and Type E options, depending on configuration.
- SUS316, SUS310S and Inconel sheath options.
- Temperature limits depend on diameter, material and coating.
The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.
- Type K and Type E thermocouple options.
- Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
- Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
- Different insertion lengths, cables and connectors to suit the measurement task.
The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.
- U-100 and U-200 head-size families.
- Guard and wheel configurations for different contact conditions.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
- Select the probe geometry, cable and connector to suit the installation.