Cart
Custom content

This is custom content

  • Out-of-Stock
    Hyoda KME-2 & KME-4 Temperature Controllers | Seacom

Hyoda KME-2 & KME-4 Temperature Controllers with Microswitch

The Hyoda KME-2 and KME-4 provide temperature switching through a remote sensing bulb and one microswitch contact.

  • KME-2 includes a temperature indicator.
  • KME-4 operates without a temperature indicator.
  • Liquid-filled and gas-filled configurations.
  • Wall-mounted enclosure with IP43 drip-proof protection.
  • Published contact rating: AC 125 V or 250 V / 5 A.

Need advice or a quotation?

Ask Seacom about specifications, availability and the right instrument for your application.

Hyoda KME-2 and KME-4 Temperature Controllers with Microswitch

The Hyoda KME-2 and KME-4 are fluid-filled temperature controllers with a remote sensing bulb and one microswitch contact. Their wall-mounted arrangement allows the switching instrument to be installed separately from the measurement point.

Choose KME-2 when local temperature indication is needed, or KME-4 when switching is required without a local indicator. Specify the temperature scale, sensing bulb, connection and capillary arrangement for the installation.

Compare KME Models

FeatureKME-2KME-4
Temperature indicator Included Not included
Microswitch One contact One contact
Mounting Wall-mounted Wall-mounted
Enclosure protection IP43, drip-proof IP43, drip-proof
Selection focus Switching with local temperature reading Switching without a local temperature display

Specifications and Options

SpecificationDetails
Measuring system Liquid-filled or gas-filled, depending on configuration
Liquid-filled range coverage −70 to 400°C
Gas-filled range coverage −200 to 600°C
Published capillary lengths Liquid-filled, single capillary: 10 m; gas-filled: 50 m
Published contact rating AC 125 V or 250 V / 5 A
Contact terminals At the lower part of the instrument enclosure

Range coverage describes available configurations, not the scale of every instrument. Confirm the selected standard scale, switching point, bulb dimensions, connection and permissible capillary length before ordering.

KME-2: With Temperature Indicator

A practical choice when an operator needs to read the temperature at the controller as well as use its switching contact.

Hyoda KME-2 temperature controller with indicator and dimensional information

KME-4: Without Temperature Indicator

Suitable when the application needs the switching function and a local temperature display is not required.

Hyoda KME-4 temperature controller without indicator and dimensional information

Choosing the Right Configuration

  • Temperature: provide the operating range, expected extremes and required switching point.
  • Local reading: decide whether the operator needs an indicator at the controller.
  • Electrical circuit: specify voltage, current and load type so contact suitability can be checked.
  • Sensing bulb: confirm insertion length, diameter, process connection and any thermowell dimensions.
  • Capillary route: measure the route from the sensing point to the controller, allowing for installation access and protection from damage.
  • Environment: check that IP43 protection suits the mounting location and exposure.

Compare All Six Hyoda Thermometer Listings

Product / rangeInstrument typeDisplay / arrangementIndication / switchingProtectionSelection focus
M Series Fluid-filled; M3/M4/M6 and WP versions 75 / 100 / 150 mm; remote bulb Optional pointer contacts; M3: one, M4/M6: one or two IP43; WP: IP65 Remote reading with a choice of dial sizes
S6 / S6-WP Fluid-filled 150 mm; remote bulb Indication only or one/two pointer contacts IP43; WP: IP65 Large dial for remote temperature indication
AY Series Bimetal; AY4/AY5 and QS versions 100 / 125 mm; stem-mounted; QS adjustable head Temperature indication IP65 Local reading at the sensing stem
KME-2 / KME-4 Fluid-filled; wall-mounted KME-2: with indicator; KME-4: without indicator One microswitch contact IP43 Temperature switching with or without local indication
ES-UT Liquid-filled; wall-mounted Remote sensing bulb One or two microswitch contacts IP65; published explosion-proof designation d2G4 Applications requiring a suitable explosion-protected controller; confirm approval suitability
Fluid-Filled Thermometer Range General range listing; multiple configurations Depends on selected model Depends on selected model Depends on selected model Explore other Hyoda temperature indication and control options

The Fluid-Filled Thermometer Range is an overview listing, not a single model with one specification. Compare the exact model, temperature scale, sensing bulb, connection and mounting before ordering. S6 and M6 both have 150 mm dials, but this does not establish interchangeability.

Related Hyoda Thermometers

  • S6 / S6-WP — Fluid-filled thermometer with a 150 mm dial, remote sensing bulb and a choice of IP43 or IP65 enclosure.
  • M Series — Fluid-filled thermometers with 75, 100 or 150 mm dials, remote sensing bulbs and optional pointer contacts.
  • ES-UT — Liquid-filled controller with one or two microswitch contacts and an explosion-proof enclosure; confirm approval suitability for the installation.
  • AY Series — Bimetal thermometers for local indication, with 100 or 125 mm dials and adjustable-head QS versions.
  • Fluid-Filled Thermometer Range — Explore other Hyoda configurations for temperature indication and control, selected according to the measurement and installation requirements.

Need Help Selecting a KME Temperature Controller?

Contact Seacom with your temperature range, switching point, electrical load, connection and capillary length requirements. For a replacement, include photographs of the existing nameplate and installation so we can help check the appropriate model and configuration.

16 other products in the same category:

Vaisala HMT140 Replacement with RFL100 | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.

  • Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
  • Existing HMT140 installations can continue to be supported
  • Migration should be checked against the existing sensor and input type
  • Contact Seacom for replacement selection and viewLinc compatibility
Vaisala Transmitter Indigo300
  • Out-of-Stock

The Vaisala Indigo300 is a rugged industrial transmitter for one Vaisala Indigo-compatible smart probe, providing local measurement display and up to three configurable analog outputs.

Its corrosion-resistant IP66 metal enclosure, flexible probe mounting and interchangeable probe design make Indigo300 suitable for humidity, temperature, dew point, CO2, moisture in oil and other demanding industrial measurements.

Dry Well Calibrator Practi-Cal
  • Out-of-Stock

The EDL Practi-Cal Series provides dry-well and surface testing facilities for compatible temperature probes.

  • PRI-1: Ambient to 350°C, aluminium block.
  • PRI-2: Ambient to 650°C, brass block.
  • Interchangeable wells and custom insert options.
  • Provision for an independent reference probe.
  • 0.1°C controller resolution.
  • RS-232 interface and iTools software.
Vaisala HMW90 Humidity Transmitter | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala HMW90 Series provides high-accuracy humidity and temperature measurement for demanding indoor HVAC and controlled-environment applications.

  • Humidity accuracy up to ±1.7% RH
  • Analog or Modbus RTU output models
  • Optional display and configurable relay
  • Replaceable measurement module with calibration certificate
Smart Humidity and Temperature Probe for high pressure HMP4
  • Out-of-Stock

The Vaisala HMP4 provides high-accuracy humidity and temperature measurement in compressed air, breathing air, industrial gases, vacuum systems and other processes operating at pressures up to 100 bar.

  • Operating pressure below 100 bar, including vacuum applications
  • Humidity accuracy up to ±0.8% RH
  • Temperature range from -70 °C to +180 °C
  • Standalone Modbus RTU or connection to an Indigo transmitter
Vaisala HMT330 Transmitter| Indigo500 Replacement
  • Out-of-Stock

The Vaisala HMT330 Series was a flagship industrial transmitter platform for humidity, temperature and calculated moisture parameters. It is discontinued and replaced by an Indigo500 transmitter with the HMP probe selected for the application.

  • HMT331 wall mounting → HMP1 with Indigo500
  • HMT333 ducts and tight spaces → HMP3 or HMP9 with Indigo500
  • HMT334 high pressure and vacuum → HMP4 with Indigo500
  • HMT335 high temperature → HMP5 with Indigo500
  • HMT337 high humidity → HMP7 with Indigo500
  • HMT338 pressurised pipelines → HMP8 with Indigo500
EDL Comparison Cryostat Calibrator CryoCal2
  • Out-of-Stock

The EDL CRYO-CAL-2-LI uses liquid nitrogen cooling for comparison calibration of compatible temperature sensors.

  • Temperature range: −196°C to 0°C.
  • Standard calibration block with four sensor wells.
  • Controlled non-inductive DC heater.
  • No pumping or stirring system.
  • RS-232 interface and iTools software.
  • 120 V and 240 V power configurations available.
Vaisala Humidity And Temperature Transmitter XMP10
  • Out-of-Stock

The Vaisala XMP10 Series comprises compact humidity and temperature probes offering accuracy levels up to ±1% RH and ±0.1 °C for demanding HVAC, data-centre and critical-environment applications.

The probes feature analog or Modbus RTU outputs, a standard M8 connector, an IP65-rated body and compatibility with Vaisala Origo10 modular HVAC transmitters.

Vaisala HMT120 and HMT130 Transmitters (Are Being replaced by Origo10) | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala HMT120 and HMT130 provide accurate, stable humidity and temperature measurement for cleanrooms, laboratories, data centres and demanding HVAC applications.

Product transition: HMT120/HMT130 are expected to be phased out. For new projects, the Vaisala Origo10 is the recommended replacement platform.

  • Humidity accuracy up to ±1.5% RH
  • HMT120 loop-powered 4–20 mA output
  • HMT130 voltage outputs, RS-485 and relay
  • Interchangeable fixed or remote measurement probe
  • Origo10 recommended for new installations
CO2, Temperature and Humidity Transmitter Series GMW90
  • Out-of-Stock

The Vaisala GMW90 Series provides stable wall-mounted carbon-dioxide and temperature measurement, with optional humidity, for demanding HVAC and building-automation applications.

  • Carbon-dioxide measurement from 0 to 5000 ppm
  • CO₂ accuracy up to ±(30 ppm + 2% of reading)
  • Temperature measurement from −5 to +55 °C
  • Optional HUMICAP® relative-humidity measurement from 0 to 95 %RH
  • Voltage, current or Modbus RTU output models
  • Display and CO₂ status-indicator options
  • Field-exchangeable calibrated measurement modules
  • Traceable three-point CO₂ calibration certificate included
Smart Humidity and Temperature Probe for high temperature HMP5
  • Out-of-Stock

The Vaisala HMP5 provides high-accuracy humidity and temperature measurement in ovens, dryers, kilns and other processes operating at temperatures up to +180 °C.

  • Humidity accuracy up to ±0.8% RH
  • Temperature accuracy up to ±0.1 °C
  • −70 to +180 °C probe-head measurement range
  • Standalone Modbus RTU or Vaisala Indigo transmitter operation
Indigo200 Series Transmitters for Vaisala smart probes for Vaisala Smart Probes
  • Out-of-Stock

The Vaisala Indigo200 Series is the standard transmitter platform for one interchangeable Indigo-compatible smart probe, providing local display and practical automation-system connectivity.

  • Indigo201 with three analog outputs and two relays
  • Indigo202 with Modbus RTU and two relays
  • Colour display with numerical and graphical views
  • IP65 enclosure for industrial measurement applications
Vaisala HMP8
  • Out-of-Stock

The Vaisala HMP8 provides high-accuracy humidity and temperature measurement in compressed air, refrigerant dryers and pressurised industrial processes up to 40 bar.

  • Humidity accuracy up to ±0.8% RH
  • Operating pressure from vacuum to 40 bar
  • Adjustable insertion depth with two probe lengths
  • Optional ball valve for insertion and removal under process conditions
This website uses cookies to ensure you get the best experience on our website