Watanabe 3 port Isolation Amplifier (High gain) ZM-310 is a high gain type 3-port isolation amplifier, and supports minute input (mV). In addition, since a transformer with a high coupling coefficient is used, loss is small and linearity is extremely excellent. Although it is a smalllinearity transformer, it has a high withstand voltage and high airtightness due to the case filling structure, making it ideal for isolating various signals such as transducer signal isolation and instrumentation signal isolation. Board mounting type with 2.54mm pitch allows for easy board layout.
Features
.
Vaisala Oil Moisture Transmitter MMT330 enables fast and reliable detection of moisture in oil. The MMT330 can be used in on-line moisture monitoring and as a control device, allowing separators and oil driers to be started only when needed. Proper monitoring saves both oil and the environment. With the MMT330 it is easy and economical to monitor the effects of moisture in oil.
We supplies variety range of recording consumables, such as recording pen, ink ribbon, recording head, cartridge pen, refillable ink and others for recorder and thermohygrograph of various brands, such as:
Vaisala HUMICAP® Humidity and Temperature Probe HMP8 is designed for pressurized applications in compressed air systems, refrigerant dryers, and other pressurized industrial applications where easy insertion and removal of the probe and adjustable installation depth into the pipeline are needed.
The HMP8 is part of the Indigo product family and compatible with Indigo500 and Indigo200 series transmitters and free Insight PC Software.
Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber.
With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be process externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flowmeters.
The positive displacement flow technology allows for precise flow measurement of most clean liquids regardless of the media conductivity. Other liquid properties also have a minimal effect on the performance of this type of meter. Flow profile conditioning is not required as with alternative flow technology options making oval gear installations simple to install in tight spaces and at an economical price.
Hyoda (Japan) Explosion Proof (d2G4)Thermometer ES-UT
Aichi Tokei Magnetic Flow Sensors For Liquids with Display
Model NW (Local display type)
Model NW-P (With pulse output)
The Kofloc mass flow controllers and meters, which measure the mass flow rate, are less influenced by the temperature and pressure as compared with mechanical flow meters and valves, and can electrically exchange information about the flow rate. They are used in a wide range of processes and equipment in the fields where high levels of accuracy, repeatability, responsiveness and cost effectiveness are required, such as semiconductors, optic fibers, various analyses, fuel cells, liquid crystal, organic electroluminescence, biotechnology, foods, environmental measurement, combustion gas control, plant facilities and examination equipment.
Models:
EXE-Flow Model EX-700R Series
EX-250S Series
EX-550 series
8700 series
3660 series
3760 series
3200 series
3100 series
5100 series
5410 series
Anritsu BR series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven.
Specific components may be combined to customize products for the needs of a customer's specific application.
Anritsu SH series probes are ideal for measuring the temperatures of moving or rotating surfaces. The SH series is better suited to small measurement targets than the U series. Specific components may be combined to customize products for the needs of a customer's specific application.
Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.
The flow meter for gas mixing uses a KOFLOC multiple flow meter to mix multicomponent fluids. Connection of pipes to respective gas inlets and the mixed gas outlet permit gases to be mixed. This flow meter is ideal for easy gas mixing in laboratories and studies.
Dickson Touch Screen Data Logger TWP were made to simplify, yet enhance your monitoring experience. With a Dickson touchscreen TWP, you can view temperature, humidity or differential pressure data with nothing more than the touch of a finger. With access to your data right on the screen, proving historical monitoring during an audit has ever been easier.
Watanabe 3 port Isolation Amplifier (High gain) ZM-310 is a high gain type 3-port isolation amplifier, and supports minute input (mV). In addition, since a transformer with a high coupling coefficient is used, loss is small and linearity is extremely excellent. Although it is a smalllinearity transformer, it has a high withstand voltage and high airtightness due to the case filling structure, making it ideal for isolating various signals such as transducer signal isolation and instrumentation signal isolation. Board mounting type with 2.54mm pitch allows for easy board layout.
Features
.png)
