Home

Anritsu AM8000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This series is replaced by Anritsu Temperature Datalogger AM-9000 Series, please click here to view

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

Anritsu Model AT series probes are Air temperature sensors designed to measure the temperature of Air. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu Model SHEATH series probes are internal temperature sensors designed to measure the temperature of liquids, air, and gases. The sheathed section can be bent to a radius five times the outer diameter of the sheath. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu VA series probes are clip type surface temperature probes to measure temperature of a heat pipe.

Specific components may be combined to customize products the needs of a customer's specific application.

Kalinsky differential pressure gauge / differential pressure transmitter DMG5 was developed for supervising overpressure of cleanrooms.

A differential pressure sensor range +/- 50 Pa, red LED-display, alarm-lamp, signal horn, analogue output 0-10 V and 4-20 mA for connection with data logger, 2 switching outputs with adjustable threshold value and an additional circuitry to store the alarm message at increasing pressure in the normal range after fall back of the threshold value of the switching output are included.

By using of a red button at the front its possible to reset the alarm message. A software controlled signal damping for display and switching outputs can selected by 10 steps.

Anritsu FL Series can measure temperatures in environments subject to high-frequency waves, microwaves, or high voltages-areas where electric thermometers such as thermocouples, platinum resistance temperature detectors, and thermistors are typically ineffective.

・Capable of measurements in environments subject to high-frequency waves or high voltages.
・A fiber optic thermometer offering a wide measurement range.
・Analog output capability allows use for machine temperature control.
・Measurement data can be imported into a PC using software* bundles with the thermometer.
* for Microsoft® Windows® 7, Windows® 8.1, Windows® 10 (for English)

Anritsu SF series probes are flexible internal temperature sensors featuring extra-fine thermocouple wires covered with a Teflon-coated sheath. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Anritsu STN series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application

Anritsu S series has made a great advance about all the quality because the contact strip has adopted a new method which incorporates a four fulcrum structure. It is the fruit of sensors technology that realized the fundamental quality of accuracy, response time and durability!

Support function of contact with tolerance slope range of ±4 degrees" added to the most accurate Anritsu SX Series.

The flexible head allows the temperature sensing part follows and closely contacts the object to be measured, and it's possible to high accurate measure more easily.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu HHT series probe are high-durability temperature sensors designed to measure high-temperature surfaces.

Specific components may be combined to customize products for the needs of a customer's specific application.

DeltaTrak's In-Transit Temperature Chart Recorder, Model 16000-16502, is a highly reliable, time and temperature strip chart recorder used to record environmental conditions encountered during storage and transportation of food, pharmaceuticals, chemicals, and other temperature-sensitive commodities in refrigerated trucks, rail cars, ocean and air freight containers.

The In-Transit Temperature Chart Recorders are specially engineered with a light and durable vented case for superior air circulation and faster temperature response. These chart recorders provide maximum accuracy and generate a permanent record of transit conditions on a 36 inch (91 cm) strip chart. A view port allows the operator to visually confirm activation after pulling the start-up tab.

Kobayashi offer a wide variety of products for instruments used in analysis and measurement of temperature, humidity, wind direction, wind speed, pressure. Kobayashi paper is used for a comprehensive range of applications from weather, medicine, machinery and steel, to chemicals, pharmaceuticals, monitoring and analysis.

We are the distributor of Koyashi Chart Paper, the first company in Japan to produce and sell recording paper.

• Kobayashi
• Sato
• Sekonic
• Isuzu
• Dickson
• Chino
• Hisamatsu

If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.

Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.

Anritsu BR series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MG series probes are temperature sensors designed for stationary surfaces. Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu CS series probes are small surface temperature sensors designed to measure the temperature of stationary surface.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.

Having trouble measuring internal temperature of an object? Anritsu BS series are your best choice as it is able to do so by piercing through the object. It is suitable for semi-solid objects and liquids.

Anritsu BC series probes are internal temperature probes designed to measure the center temperature of food, liquid or semi-solid materials.It is waterproof (IPX5) and can be washed with running water, so you can use it cleanly and hygienically.In order to prevent contamination, the probes designed to prevent the parts falling off.

Depending on the application, it is possible to combine the outside diameter, length, presence of coating of the protective pipe and plug shape.

Anritsu AR-6500 series infrared thermometers are capable of non-contact temperature measurement and come with contact type thermometer functions

The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.

Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.

Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.

The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.

Kent Elster Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.

Prescale Pressure Film measures and visualizes pressure range. When presure is applied, the micro capsules are broken and the color-forming material reacts with the color-developing material. Red patches appear on the film.

We supplies variety range of recording consumables, such as recording pen, ink ribbon, recording head, cartridge pen, refillable ink and others for recorder and thermohygrograph of various brands, such as:

• ABB Kent
• Dickson
• Hisamatsu
• Isuzu
• Sato
• Sekonic
• Yokogawa

Anritsu UX series is temperature probes suitable for measuring the temperature of moving or rotating surfaces.

Since it has a contact support function, it does not easily shake even if it comes into contact with a moving object, and it is easy to adhere to the object to be measured.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu SC series probes are designed to measure stationary surfaces that can be attached to measurement targets with screws. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu SH series probes are ideal for measuring the temperatures of moving or rotating surfaces. The SH series is better suited to small measurement targets than the U series. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu CR Series is a temperature probes for the tips of soldering irons. Select the probe type best-suited to the diameter of your soldering iron tip.

Electromagnetic flow meters detect flow by using Faraday's Law of induction.

Inside an electromagnetic flow meter, there is an electromagnetic coil that generates a magnetic field, and electrodes that capture electromotive force(voltage). Due to this, although it may appear as if there is nothing inside the flow pipe of an electromagnetic flow meter, flow can be measured.

Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber.

With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be process externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flowmeters.

The positive displacement flow technology allows for precise flow measurement of most clean liquids regardless of the media conductivity. Other liquid properties also have a minimal effect on the performance of this type of meter. Flow profile conditioning is not required as with alternative flow technology options making oval gear installations simple to install in tight spaces and at an economical price.

Anritsu A series are the ultimate sensor for the surface temperature measurement. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

*This is replacement probe for N series, it is more durable than ever.

At first glance Anritsu U series probe looks simple, but it has many hidden new mechanisms. Frictional heat have a serious adverse effect during measurement of the temperature of the moving surface. The contact-pressure control plate is one of our own techniques to reduce measurement error in such a case. We use a non-fixed support structure to cope with contact friction at the heat-sensing part. Keeping the support in a non-fixed state helps reduce the stress applied to the part, thereby improving durability

Anritsu AX series are the ultimate sensor for the surface temperature measurement: A series, and enhanced it by fitting it with Flexible head. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.

Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

It is not just a thermometer, it is a Anritsu thermometer with the built in printer! Linear print system is possible high speed and stuck less. You may printout your temperature data anywhere at anytime! The reliable Anritsu AP-450 series corresponds to your application

AP-450 is replacement of AP-800 (AP-800K, AP-800E, AP-850K, AP-850E) series

Whisper Ultrasonic Leak Detector is ideal for detecting and locating sources of ultrasonic sound through the use of sophisticated electronic circuitry. Unaffected by audible noise, Whisper incorporates an Internal Noise Control allowing for use in extremely noisy environments, such as mechanical rooms, and around operating chillers. Because Whisper is designed to detect ultrasound at 40.5 kHz, not even a murmur will escape detection.

Anritsu HD series are high accuracy handheld thermometers by Anritsu meter. The high accuracy is realized by adopted the thermocouple material from input plug to cold junction It has automatic standard voltage calibration system, hence achieved high accuracy, high response and high stability. This is the right tool if you are looking for precise temperature measurement!

Anritsu HR series are high accuracy handheld thermometers by Anritsu meter. The high accuracy is realized by adopted the thermocouple material from input plug to cold junction It has automatic standard voltage calibration system, hence achieved high accuracy, high response and high stability. This is the right tool if you are looking for precise temperature measurement!