Temperature And Universal Controller

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

Model MDC*Y
Display High contrast LED
Size 48x48, 48x96, 56x56, 96x96 mm
Input type Type K, J, E, R, S, T, RTD, mA, DC voltage
Input & Scale Range Scale range from -1999 to 9999, Input range depends on input signal
Output Single or Dual Relay, 4-20mA, 0-20mA or Pulsed voltage
Accuracy 3% of reading or 2ºC, whichever greater; For Type R,S: ±5ºC between 0 - 200ºC
Operation Temperature 0 to 50°C, 0 to 90%RH non condensing
Power supply 85 - 265 VAC
Features
  • Multipurpose,
  • May used as indicator, controller and transmitter
  • Suitable for any process, not only temperature measurement.

Specific References

12 other products in the same category:

.

Sato SK-170GT WBGT Heat Stress Monitor

Sato SK-170GT WBGT Heat Stress Monitor

Sato SK-170GT WBGT Heat Stress Monitor is a portable all-in-one instrument for assessing heat stress in indoor and outdoor working environments.

It measures and displays the WBGT index, ambient temperature, globe temperature and relative humidity. Its built-in black globe detects radiant heat from direct sunlight, hot machinery and surrounding surfaces.

  • WBGT, temperature, globe temperature and humidity measurement
  • Selectable indoor and outdoor WBGT modes
  • Conforms to JIS B 7922 Class 2 based on ISO 7243
  • Adjustable WBGT alarm with approximately 75 dB buzzer
  • MAX/MIN, display hold and automatic power-off
  • Wind-speed compensation setting
  • Optional RS-232C connection for real-time PC monitoring
  • Tripod mounting hole and carrying case included
Vaisala HMT140 Wi-Fi Data Logger – Discontinued, Replaced by RFL100

Vaisala HMT140 Wi-Fi Data Logger – Discontinued, Replaced by RFL100

The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.

  • Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
  • Existing HMT140 installations can continue to be supported
  • Migration should be checked against the existing sensor and input type
  • Contact Seacom for replacement selection and viewLinc compatibility
Sekonic Universal 6 channel Recorder SP-100 / SP100

Sekonic SP-100 Universal 6-Channel Chart Recorder

The Sekonic SP-100 is a portable universal 6-channel chart recorder for temperature and process signals.

  • Thermocouple, Pt100, DC voltage and 4–20 mA inputs.
  • Colour chart recording with configurable ranges and scaling.
  • Selectable chart speeds and recording formats.
  • Optional memory-card recording.

Discontinued model. Contact Seacom for availability, pricing and configuration details.

Vaisala DL4000 Universal Input Data Logger for viewLinc CMS

Vaisala DL4000 Universal Input Data Logger for viewLinc CMS

The Vaisala DL4000 records current or voltage signals from industrial transmitters and brings pressure, flow, level, pH, moisture, gas concentration and other process measurements into viewLinc.

  • Scheduled for future discontinuation; confirm availability before specifying
  • Closest current substitute: Vaisala VDL200 with ANP115 analog input probe
  • Available with 1, 2 or 4 analog input channels
  • Supports 0–20 mA, 0–5 V DC or 0–10 V DC models
  • 120,000-sample onboard memory and a 10-year battery
Watanabe Output Isolator TW-2X

Watanabe TW-2X Two-Output DC Signal Isolator

The Watanabe TW-2X converts one DC voltage or current input into two proportional DC outputs for measurement and control systems.

  • Two outputs for connecting compatible receiving instruments.
  • 24 V DC power supply.
  • Accuracy: ±0.1% of full scale.
  • Response time: 50 ms, from 0 to 90%.
  • Compact construction with integrated wiring terminals.
Inficon Whisper Ultrasonic Leak Detector

Inficon Whisper Ultrasonic Leak Detector

The INFICON Whisper ultrasonic leak detector helps locate leaks by detecting ultrasonic sound. Its portable design supports troubleshooting and routine maintenance.

  • Locate leaks in compressed air and vacuum systems
  • Listen through headphones to help pinpoint the source
  • Adjust sensitivity to suit the inspection
  • Accessory options for machinery and enclosure checks
FUJIFILM Prescale Pressure Measurement Film

FUJIFILM Prescale Pressure Measurement Film

FUJIFILM Prescale reveals contact pressure and pressure distribution through changes in red colour density. Place the film between contacting surfaces to identify uneven loading and compare contact patterns.

  • Nine standard grades covering 0.006 to 300 MPa
  • Two-sheet and mono-sheet types, depending on the grade
  • For pressure checks on rollers, flanges, gaskets, presses and contact surfaces
  • Choose the grade according to pressure, temperature and humidity conditions
Cabinet for Continuous Monitoring System (CMS)

Vaisala CAB100 Industrial Cabinet for viewLinc CMS

The Vaisala CAB100 centralises differential-pressure transmitters, analog inputs and interface components for cleanroom and industrial monitoring with the viewLinc Continuous Monitoring System.

  • Preconfigured cabinet for viewLinc monitoring systems
  • CAB100A and higher-capacity CAB100B models
  • Differential pressure, analog input and hazardous-area options
  • IP54 or IP66 enclosure protection, depending on model
Tokico MBA Series Emergency Shut-Off Valve

Tokico MBA Series Emergency Shut-Off Valve

The Tokico MBA Series is an electrical signal-operated emergency shut-off valve using a CO₂ cartridge to power the cylinder actuator and close a ball valve.

  • Catalogue connection sizes from 25 to 400 mm.
  • CO₂-powered actuation without a plant compressed-air supply.
  • Electrical triggering through suitable control equipment.
  • Manual reset and horizontal or vertical piping installation.

Contact Seacom to confirm fluid compatibility, pressure, flange specification and control requirements.

Sato Desktop type Digital PH meter SK-650PH 6427-00

Sato SK-650PH Desktop Digital pH Meter

The Sato SK-650PH is a desktop digital pH meter with a sensor arm for convenient sample measurement.

  • Automatic temperature compensation with a suitable sensor.
  • One- to three-point calibration.
  • Memory for up to 99 records.
  • Sensor sensitivity and reading-stability indicators.
  • RS-232C data transfer using an optional cable.

Probe and calibration solutions are sold separately. Measuring range and accuracy depend on the selected probe.

Watanabe Digital Panel Meter WPMZ

Watanabe WPMZ Series Colour LCD Digital Panel Meters

The Watanabe WPMZ Series features a colour LCD for displaying measurements from compatible sensors and equipment.

  • WPMZ-1: DC voltage and current.
  • WPMZ-3: Strain gauge measurement.
  • WPMZ-5: Rotation and speed.
  • WPMZ-6: Instantaneous flow and totalised flow.
  • Numeric, bar graph and trend display options.
  • Selectable power supplies, alarm outputs and communication options.
Watanabe DC V/A to DC V/A Isolated Transducer TZ-1XA TZ-5XA

Watanabe TZ-1XA & TZ-5XA DC Signal Isolators

The Watanabe TZ-1XA and TZ-5XA convert DC voltage or current inputs into proportional, isolated DC outputs for measurement and control systems.

  • TZ-1XA: 100–240 V AC power supply.
  • TZ-5XA: 24 V DC power supply.
  • Accuracy: ±0.1% of full scale.
  • Zero and span adjustment: ±5% of full scale.
  • Compact construction with integrated wiring terminals.
back to top