Home

Watanabe 3 port Isolation Amplifier (High gain) ZM-310 is a high gain type 3-port isolation amplifier, and supports minute input (mV). In addition, since a transformer with a high coupling coefficient is used, loss is small and linearity is extremely excellent. Although it is a smalllinearity transformer, it has a high withstand voltage and high airtightness due to the case filling structure, making it ideal for isolating various signals such as transducer signal isolation and instrumentation signal isolation. Board mounting type with 2.54mm pitch allows for easy board layout.

Features

• High gain
• Compact and lightweight
• Low current consumption
• High CMR common mode noise rejection ratio
• High insulation, high withstand voltage

Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300

• Combines the measurement of barometric pressure, relative humidity and temperature into one instrument

• for environmental chambers including vacuum and high pressure chamber

Vaisala Humidity and Temperature Module HMM170 is a robust open frame transmitter for integration into environmental chambers that need accurate and reliable measurement even in demanding conditions including vacuum or high pressure.

The module is built to last for years and it is easy to integrate into the chamber and the circuit board. Both digital and three configurable analog output channels are available, ensuring compatibility for most chamber types. In addition to relative humidity and temperature, dew point and other calculated parameters are available.

The HMM170 provides a digital RS-485/Modbus RTU output and three freely configurable analog output channels. The module provides relative humidity, temperature, dew point, and other calculated parameters.

The new Vaisala HM70 portable humidity meter provides fast and convenient spot-checks of relative humidity and temperature. Apart from that, it can be also used to calibrate other Vaisala humidity instruments such as HMT330, HMT120, HMT130, HMW90, HMD90, HMW110, HMD110

Vaisala Indigo80 Handheld Indicator is an industrial-grade portable diagnostics tool. Accommodating up to two Vaisala measurement probes, Indigo80 is ideal for spotchecking and process monitoring, as well as for configuring, troubleshooting, calibrating, and adjusting Vaisala Indigo-compatible probes and transmitters.

Vaisala HMP80 probes are based on Vaisala HUMICAP® sensor technology and are optimized for portable humidity and temperature measurements with the Indigo80 Handheld Indicator.

Vaisala DMP80 probes is optimized for portable data logging and measurement spot-checking of process dew point measurements in a wide range of temperatures and pressure ranges.

Vaisala GMP80P CARBOCAPâ Portable Carbon Dioxide Probe with Pump Sampling GMP80P combines intelligent CO2 measurement with pump-aspirated sampling functionality.

Vaisala PTB110 Analog Barometer is designed both for accurate barometric measurements at room temperature and for general environmental pressure monitoring over a wide temperature range. Ideal for system integrations, and widely used in marine buoys and weather stations.

The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.

Applications

• Tank pressure control
• Constant flow control of mixed gas

Sato Barometer 7612-00 Baromex A barometer with a digital thermometer.

The index pointer enables you to see changes in atmospheric pressure.

The bracket made of ABS resin for wall mount makes the installation easy.

Sato Barometer 7610-20 is an authentic barometer used for meteorological observations.

You can easily find the variation of air pressure with the reference pointer.

Its classical design with the brass frame makes a great interior decor.

Vaisala BAROCAP® Digital Barometer PTB330 is a new generation barometer designed for a wide range of highend atmospheric pressure measurement.

The pressure measurement of the PTB330 is based on the Vaisala in-house, silicon capacitive, absolute pressure sensor – the Vaisala BAROCAP® Sensor. It provides high measurement accuracy and excellent long-term stability.

High accuracy The PTB330 series features extremely high accuracy. Class A barometers for the most demanding applications are fi ne-adjusted and calibrated against a high-precision pressure calibrator.

All the PTB330 barometers come with a NIST traceable, factory calibration certifi cate, also optional ISO/IEC 17025 accreditation calibration services are available. Reliability through redundancy

Vaisala CMS Industrial Cabinet CAB100 integrates Vaisala’s world-class instruments for monitoring differential pressure and other parameters into a simple, preconfigured instrument panel. In combination with the Vaisala viewLinc Enterprise Server Software, the cabinet provides pre-installed real-time monitoring of your critical environments.

The wall-mounted Vaisala GMW90 Series CARBOCAP® Carbon Dioxide, Temperature and Humidity Transmitters are especially suited for green building projects and demand controlled ventilation. The devices measure carbon dioxide and temperature and have an option for an additional humidity measurement.

The instruments come with a calibration certificate that meets traceability and compliance requirements. Traceability is easily maintained with field-exchangeable intelligent measurement modules. The transmitter can be blended into the interior design of the space where it is installed using the optional decorative cover.

Watanabe Isolator which outputs DC signal proportional to the input signals 

Features

• Space-saving and weight-saving by unifying converter and terminal block
• DIN rail mount
• 2 outputs
• Input / Output / Power supply isolated

The Vaisala Dewpoint and Pressure Transmitter DPT146 for Compressed Air makes monitoring compressed air simple and convenient. The Vaisala Dewpoint Transmitter for Compressed Air DPT146 measures both dew point and process pressure simultaneously, and is the ideal choice for anyone using or monitoring compressed air.

- The first transmitter that monitors both dew point and process pressure
- A simple and convenient transmitter for monitoring of compressed air
- Highly accurate humidity information thanks to online pressure-compensated dew point data
- Proven sensor technology
- Compatible with the Vaisala Hand-Held DM70 for easy spot checking, local - display and data logging
- Pressure: 1…10 bar
- Dew point: -60 ... +30 °C 

Kalinsky differential pressure gauge / differential pressure transmitter DMG5 was developed for supervising overpressure of cleanrooms.

A differential pressure sensor range +/- 50 Pa, red LED-display, alarm-lamp, signal horn, analogue output 0-10 V and 4-20 mA for connection with data logger, 2 switching outputs with adjustable threshold value and an additional circuitry to store the alarm message at increasing pressure in the normal range after fall back of the threshold value of the switching output are included.

By using of a red button at the front its possible to reset the alarm message. A software controlled signal damping for display and switching outputs can selected by 10 steps.

The PDT101 differential pressure transmitter is designed for demanding cleanroom applications. The sensor integrates with the Vaisala viewLinc monitoring system to measure and monitor pressure differentials in regulated environments. Ideal for high performance cleanroom environments in the life science, semiconductor and electronics industries.

Vaisala PTB330 Digital barometer is Designed for measurements in a wide environmental pressure and temperature range. Ideal for use e.g. as ship barometers, transfer standards and replacements for mercury barometers.

The Vaisala HUMICAP® Digital Humidity Module HMM105 is an open frame module for integration into environmental chambers.

The modules provide an I2C output>for relative humidity (RH) or dew point (Td). The module consists of a detachable probe assembly – a probe head with M10x1 threads and a flex cable – and the module circuit board. The probe assembly is 30 cm in length.

The module incorporates the Vaisala HUMICAP® 180R sensor which ensures excellent measurement accuracy.

Watanabe developed WPMZ series as multi-display digital panel meter matched to the production site, and focused on the basic performance such as [1. Easy to read] [2. Easy to use].

WPMZ is a product that can cover various requirements, such as process monitoring, quality judgement etc. at the production site for various applications and environment.

Sato Desktop type Digital PH meter SK-650PH 6427-00 (Probe is separately sold).

Attached sensor arm is convenient to use the stirrer.

Sensor sensitivity display, data memory and many functions are equipped.

This model is not usable for certification purpose

Sekonic ST-50 (ST-50A) is microprocessor based thermohygrograph. Apart from measuring and recording temperature and relative humidity, it also has large LCD display and alarm output. Remote application is applicable with its electronic remote sensor.

Sekonic ST-50M is microprocessor based thermohygrograph. Apart from measuring and recording temperature and relative humidity, it also has large LCD display and alarm output. Remote application is applicable with its electronic remote sensor. ST-50M comes with extra memory slot for digital recording and time printing on chart.

Installation of the Tokico emergency shutoff valve is required at various industrial equipments by the High Pressure Gas Safety Law and the Fire Defense Law.

In the MB series of emergency shutoff valve, CO2 gas cartridge with high initial torque is adopted as drive source, and ball valve making smooth movement is adopted at the valve part.

It shutoffs urgently or opens the pipelines of various fluids and is most suitable as safety disaster prevention equipment which prevents second disaster from occurring.

Vaisala HMT330 series are easy-to-use transmitters for demanding industrial and air conditioning applications. The transmitters measure relative humidity and temperature and from these calculate dew point and wet bulb temperature, mixing ratio and absolute humidity.

They can be configured to the customer's requirements on the production line, but configuration and parameters can also be set by the user. The series has both analogue and serial outputs as well as several options: different cable lengths, power supply modules and serial interface modules as well as a local display.

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.

The ones introduced here are Aichi Tokei's standard governors

• Governor for high temperature gas
• Governor with the precise adjustment handle
• Governor for gas that contains sulfide
• Other special governors

The flow meter for gas mixing uses a KOFLOC multiple flow meter to mix multicomponent fluids. Connection of pipes to respective gas inlets and the mixed gas outlet permit gases to be mixed. This flow meter is ideal for easy gas mixing in laboratories and studies.

Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.

Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.

It comes with stainless steel float and a metering a valve.

Sato WBGT Heat Stress Monitor Model SK-170GT is a handy type instrument that can measure temperature, humidity and globe temperature to measure the WBGT index.
This can be used as a guide for preventing heat stroke and estimating heat stress of working and activity environments.
(Conforming to JIS B 7922 Class 2)

The Vaisala HMW90 Series has been complemented with four new models: TMW92 and TMW93 temperature transmitters for applications where only temperature measurement is needed and the configurable HMW90 and TMW90 for special scalings.

The HMW90 and TMW90 transmitters are available in four color options: standard white, black, grey and ivory.

Humidity and Temperature Probe HMP155
Superior Accuracy for Harshest Environments

Vaisala Humidity and Temperature Probe HMP155 provides reliable humidity and temperature measurement. It is designed especially for demanding outdoor applications.

The current loop-powered, two-wire transmitter is called the Vaisala HMT120 and the three-wire transmitter - with voltage and serial line outputs as well as a relay - is called the Vaisala HMT130. The new transmitters utilize the fully interchangeable HMP110 probe.

The transmitters replace with enhanced features the currently very successful HMT100 transmitters. The HMT120 and HMT130 transmitters are especially designed for cleanroom continuous monitoring systems and are very easy to clean. The housing is also durable for continuous exposure of cleanroom cleaning agents and the interchangeable measurement probe is equipped with the latest humidity sensor technology, the HUMICAP180R.

Vaisala INTERCAP® Humidity and Temperature Transmitter Series HMD80 HMW80 HMS80 measure relative humidity and temperature in various building automation applications. Transmitters combine easy installation and reliable operation with a low requirement for maintenance.

The versatile Vaisala HMDW80 series includes transmitters for wall and duct mounting, IP65-classified transmitters for humid areas, and transmitters with a radiation shield for outdoor use. It also includes temperature-only transmitters and transmitters with an optional display.

Calculated humidity parameters –dew point temperature, wet bulb temperature, and enthalpy are also available.

Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMD110, HMW110, HMS110 series measure relative humidity and temperature in multiple HVAC applications.

The series includes transmitters for duct mounting HMD110, IP65-classified wall transmitters, and outdoor transmitters with integrated radiation shieldsHMS110.

Vaisala HMD110, HMW110, HMS110 series transmitters are equipped with trusted HUMICAP® 180R sensors. They are individually adjusted and delivered with a calibration certificate. The factory calibration is traceable to NIST.

Transmitters can be field-calibrated using either an HM70 Hand-Held Humidity and Temperature Meter, or a PC connection.

Vaisala Humidity Calibrator HMK15 makes calibration and spot checking of humidity probes and transmitters easy and reliable.

• for environmental chambers

The Vaisala HUMICAP® Humidity Module HMM100 is an open frame module for integration into environmental chambers. The modules provide a single analog output channel for relative humidity (RH) or dew point (Td).

Practically maintenance-free HMM100 is an open frame module for integration into environmental chambers. Excellent measurement accuracy with Vaisala HUMICAP® 180R sensor.

Vaisala HPP270 series is designed for demanding hydrogen peroxide bio-decontamination where repeatable, stable, and accurate measurement is essential.

The Vaisala HPP270 probe is suitable for a variety of applications such as isolator, material transfer hatch and room biodecontamination.

Vaisala HMT360 humidity and temperature transmitter is designed for use in potentially explosive atmospheres. The electronics are designed so that the transmitter is intrinsically safe. The whole transmitter can be installed directly into an explosive area, even into areas classified as having a constant risk of explosion (Zone 0). HMT360 fulfils all requirements of current standards. The microprocessor-based HMT360 is easy to install, maintain and calibrate due to its modular structure. The interchangeable probes are easy to remove and enable on-site calibration. They make the HMT360 series versatile and ensure its suitability for almost any application

Also suitable for measuring water activity of Jet Fuel

For use up to zone 0 and 20

The intrinsically safe Vaisala  HMT370EX is the ideal solution for use in hazardous areas up to zone 0 and 20. In addition to measuring relative humidity and temperature, the transmitter outputs also other humidity parameters: dew point temperature, wet-bulb temperature, absolute humidity, mixing ratio, water concentration, water mass fraction, water vapor pressure, and enthalpy. Special models for moisture in oil and jet fuel measurements are available.

Typical applications include fuel storage tanks, manufacturing of chemicals, pharmaceuticals and food, biogas production' paint booths and any other industry or process where intrinsically safe humidity or moisture in oil measurement is required. 

This next-generation HMT370EX transmitter replaces the long-running HMT360 transmitter series.
The HMT370EX offers several probe options for different applications:

• HMP371 - for wall mounting
• HMP373 - for confined spaces
• HMP374 - for pressurized spaces
• HMP375 - for high temperature
• HMP377 - for high humidity
• HMP378 - for pressurized pipelines

Models for measuring moisture in oil and jet fuel:

• HMP378F - for moisture in oil
• HMP378H - for JET A-1 fuel

If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.

Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.

RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Aichi Tokei Magnetic Flow Sensors For Liquids with Display

Model NW (Local display type)
Model NW-P (With pulse output)

Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range

• Electronic Version
• Diesel 
• Crude Palm Oil (CPO)
• Petrol
• Heavy Oil
• Light Oil

TOKICO FLOWMETER, TOKICO OIL FLOWMETER is a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.

• Diesel 
• Crude Palm Oil (CPO)
• Petrol
• Heavy Oil
• Light Oil

The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves

The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).

Watanabe Isolator which outputs DC signal proportional to the input signals (2-output)

Features

• Space-saving and weight-saving by unifying converter and terminal block
• DIN rail mount
• 2 outputs
• Input / Output1 / Output2 / Power supply isolated

Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

The Vaisala HM40 is a compact, robust and affordable hand-held meter for various portable measurement applications. It is an ideal spot-checking tool that is easy to use and provides reliable measurement. The HM40 hand-held utilizes the interchangeable HMP110 probe that was launched earlier this year and is equipped with the latest humidity sensor technology, the HUMICAP® 180R.

Model available: HM41, HM42, HM45, HM46

Kent Elster Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.

The Kofloc mass flow controllers and meters, which measure the mass flow rate, are less influenced by the temperature and pressure as compared with mechanical flow meters and valves, and can electrically exchange information about the flow rate. They are used in a wide range of processes and equipment in the fields where high levels of accuracy, repeatability, responsiveness and cost effectiveness are required, such as semiconductors, optic fibers, various analyses, fuel cells, liquid crystal, organic electroluminescence, biotechnology, foods, environmental measurement, combustion gas control, plant facilities and examination equipment.

Models: 
EXE-Flow Model EX-700R Series
EX-250S Series
EX-550 series
8700 series
3660 series
3760 series
3200 series
3100 series
5100 series
5410 series

It is simple to use this Dickson pressure logger PR125, PR325, PR525, PR120, PR320 to record and integrate pressure data into documents and spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, this logger is the perfect instrument.

Dickson Pressure Recorder PW4 and PW8 series comes with weather-resistant case-- the outdoor pressure monitoring solution of choice

Sato Thermohygrograph NSII-Q, Sigma II, 7210-00, 7211-00
(as known as Sato Thermohygrograph SigmaII, Sato Thermohygrograph 7210-00, Sato Thermohygrograph 7211-00) comes with all transparent acryl-resin made case provides a full view of the chart paper without opening the case

Features:

* The required time cycle is selected by simply pushing the changeover switch
* Recording charts is made by non-dust paper and it is with holes for easy binding in a file .

Isuzu Thermohygrograph TH27R TH-27R

Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.

Watanabe Plug-in Compact Signal Converter

he most compact type of plug-in signal converter in Watanabe Electric Industry’s signal converter line.We offer a low-cost, compact type with a socket to easily plug and unplug from the main unit for simpler maintenance.

The product line also includes isolators, distributors (current loop supply), thermocouple converters, RTD converters, and potentiometer converters.

The Vaisala HUMICAP® Humidity and Temperature Probe HMP9 is designed for easy installation in rapidly changing environments where a fast response time, measurement performance, and chemical tolerance are essential. The compact size enables installation even in tight spaces, with the probe head only 5 mm (0.2 in) in diameter.

The HMP9 complements the Indigo product family and is ideal for applications such as inlet monitoring in dryers, air handling units, data centers, test chambers, and other humidity measurement applications with temperatures under 120 °C (248 °F) that don’t involve high pressure. The HMP9 is compatible with Indigo500 and Indigo200 series transmitters and Insight PC Software.

Humidity and Temperature Probe HMP3 
for general purpose humidity and temperature applications with exchangeable sensor

Vaisala HUMICAP® Humidity and Temperature Probe HMP3 is a general-purpose probe designed for processes with moderate humidity and temperature levels. The probe structure allows the sensor to be replaced in the field without tools, making it suitable for applications such as industrial HVAC systems, paint booths, cleanrooms, environmental chambers, and applications where periodic recalibration is not sufficient for maintenance.

HMP3 is part of the Indigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with Vaisala Insight PC software for data visualization, easy probe configuration, and field calibration.

Humidity and Temperature Probe HMP4
for high pressure humidity and temperature applications with exchangeable sensor

Vaisala HUMICAP® Humidity and Temperature Probe HMP4 is designed for high-pressure applications such as compressed air systems in maritime, breathing air, and industrial applications, where measurement performance and chemical tolerance are essential. 

HMP4 is part of the Indigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with Vaisala Insight PC software for data visualization, easy probe configuration, and field calibration.