Home

Watanabe 3 port Isolation Amplifier (High gain) ZM-310 is a high gain type 3-port isolation amplifier, and supports minute input (mV). In addition, since a transformer with a high coupling coefficient is used, loss is small and linearity is extremely excellent. Although it is a smalllinearity transformer, it has a high withstand voltage and high airtightness due to the case filling structure, making it ideal for isolating various signals such as transducer signal isolation and instrumentation signal isolation. Board mounting type with 2.54mm pitch allows for easy board layout.

Features

• High gain
• Compact and lightweight
• Low current consumption
• High CMR common mode noise rejection ratio
• High insulation, high withstand voltage

Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300

• Combines the measurement of barometric pressure, relative humidity and temperature into one instrument

Vaisala PTB110 Analog Barometer is designed both for accurate barometric measurements at room temperature and for general environmental pressure monitoring over a wide temperature range. Ideal for system integrations, and widely used in marine buoys and weather stations.

The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.

Applications

• Tank pressure control
• Constant flow control of mixed gas

Sato Barometer 7612-00 Baromex A barometer with a digital thermometer.

The index pointer enables you to see changes in atmospheric pressure.

The bracket made of ABS resin for wall mount makes the installation easy.

Sato Barometer 7610-20 is an authentic barometer used for meteorological observations.

You can easily find the variation of air pressure with the reference pointer.

Its classical design with the brass frame makes a great interior decor.

Vaisala BAROCAP® Digital Barometer PTB330 is a new generation barometer designed for a wide range of highend atmospheric pressure measurement.

The pressure measurement of the PTB330 is based on the Vaisala in-house, silicon capacitive, absolute pressure sensor – the Vaisala BAROCAP® Sensor. It provides high measurement accuracy and excellent long-term stability.

High accuracy The PTB330 series features extremely high accuracy. Class A barometers for the most demanding applications are fi ne-adjusted and calibrated against a high-precision pressure calibrator.

All the PTB330 barometers come with a NIST traceable, factory calibration certifi cate, also optional ISO/IEC 17025 accreditation calibration services are available. Reliability through redundancy

Stop the loss. The Vaisala CARBOCAP® MGP262 continuously measures the methane concentration in offgas from your biogas upgrading unit to keep you from letting your profits go up in the air.

Focus on what matters. The MGP262 is the answer to the problem that some methane slip always occurs in the upgrading process. It helps you adjust your process so that you avoid greenhouse gas emissions while you can concentrate on producing the best biomethane possible

for smart control of biogas quality

Get more value out of waste by improved decision-making, and by reducing your operating costs. Vaisala CARBOCAP® MGP261 Multigas Probe for Methane, Carbon Dioxide and Humidity helps in improving your process and in protecting the Combined Heat and Power (CHP) engine. The MGP261 probe is compact in size, Ex certified, and can be installed directly into the gas line without the need for sample treatment.

>The measurement probe is suitable for applications such as anaerobic digestion of landfill, industrial and municipal waste, wastewater treatment, CHP engine monitoring, as well as active carbon filter monitoring.

Vaisala CMS Industrial Cabinet CAB100 integrates Vaisala’s world-class instruments for monitoring differential pressure and other parameters into a simple, preconfigured instrument panel. In combination with the Vaisala viewLinc Enterprise Server Software, the cabinet provides pre-installed real-time monitoring of your critical environments.

The wall-mounted Vaisala GMW90 Series CARBOCAP® Carbon Dioxide, Temperature and Humidity Transmitters are especially suited for green building projects and demand controlled ventilation. The devices measure carbon dioxide and temperature and have an option for an additional humidity measurement.

The instruments come with a calibration certificate that meets traceability and compliance requirements. Traceability is easily maintained with field-exchangeable intelligent measurement modules. The transmitter can be blended into the interior design of the space where it is installed using the optional decorative cover.

MSR ADT transmitter with digital processing of the measured values and temperature compensation for the continuous monitoring of the ambient air and detection of combustible gases and vapours. The calibration routine with selective access release enables the comfortable calibration of the transmitter. In addition to the standard analog output (0) 4-20 mA or (0) 2- 10 V DC the ADT-23 is equipped with a RS-485 interface for different protocols. Two relays with adjustable switch threshold are available as an option.

The Vaisala MMT310 series incorporates the latest generation of the Vaisala HUMICAP® Sensor, developed for demanding moisture measurement in liquid hydrocarbons.

The sensor’s excellent chemical tolerance provides accurate and reliable measurement over the wide measurement range.

The MMT310 series can be used in lubrication and hydraulic systems as well as in transformers. It can be used for on-line moisture monitoring and as a control function, allowing separators and oil purifiers to be started only when necessary.

for %-level measurements in life science incubators, cold storage facilities and all demanding applications

The Vaisala CARBOCAP® Carbon Dioxide Probe GMP251 is an intelligent, stand-alone, %-level probe for measuring CO2 in life science incubators, cold storage facilities, fruit and vegetable transportation, and in all demanding applications where stable and accurate percentage-level CO2 measurements are needed. The operating temperature range is -40 … +60 °C and the measurement range is 0 … 20%CO2.

The GMP251 is based on Vaisala’s unique,second-generation CARBOCAP® technology that enables exceptional stability. A new type of infrared (IR) light source is used instead of the traditional incandescent light bulb, which extends the lifetime of the GMP251. It has full temperature and pressure compensations of CO2 measurement – integrated temperature measurement for compensation purposes. The sensor head is heated to prevent condensation. Digital output over RS-485: Modbus & Vaisala Industrial Protocol. A calibration certificate is always included with the product

The GMP251 probe is part of the Indigo product family and can also be connected to the Indigo500 and Indigo200 series transmitters to extend its features, for example, for a display or relays.

The GMP251 can also be used with with the free Insight PC Software.

For spot-checking, the ideal choice is the Handheld CO2 Meter GM70.

The GMP251 replaces the following discontinued products: GMM221 and GMT221

for ppm-level measurements in agriculture, refrigeration, demanding HVAC, and for plant growth manufacturers

The Vaisala CARBOCAP® Carbon Dioxide Probe GMP252 is an intelligent, stand-alone, ppm-level probe. It's intended for measuring CO2 in agriculture, refrigeration, greenhouses, demanding HVAC applications, and for plant growth chamber manufacturers. It is suitable for harsh and humid CO2 measurement environments where stable and accurate ppm-level CO2 measurements are needed. The operating temperature range is -40 … +60 °C and the measurement range is 0 … 10 000 ppm CO2, and  even up to 30 000 ppm CO2  with a slightly reduced accuracy. 

The GMP252 can also be placed inside the Vaisala Radiation Shield DTR250 for measuring dynamically outdoor CO2 levels.

The GMP252 probe is part of the Indigo product family and can also be connected to the Indigo500 and Indigo200 series transmitters to extend its features, for example, for a display or relays.

The GMP252 can also be used with with the free Insight PC Software.

For spot-checking, the ideal choice is the Handheld CO2 Meter GM70.|

The GMP252 replaces the following discontinued products: GMM222 and GMT222

• For Outdoor / Demanding Measurement

The Vaisala Carbon Dioxide (CO₂) Probe GMP343 is an accurate and rugged probe-type instrument for ecological measurements.

Typical applications include CO2 soil respiration, ambient CO2 monitoring, plant growth chambers, and OEM applications.

The Vaisala Carbon Dioxide (CO₂), Humidity and Temperature Transmitter is the most economical way to monitor both indoor air quality (IAQ) and human presence with one sensor. Inadequate ventilation results in elevated CO2 levels, causing drowsiness and decreased productivity. Good indoor air quality can be achieved based on occupancy levels. Energy is saved by minimizing the use of unconditioned outside air. 5-year warranty is valid for instruments purchased in 2021 and beyond.

For accurate and stable HVAC measurements, the wall-mounted Vaisala CARBOCAP® Carbon Dioxide and Temperature Transmitter Series GMW80 provides the best stability and reliability on the market, up to 15 years. These indoor air quality sensors designed for standard, demand-controlled ventilation applications. The GMW80 is ideal for buildings occupied 24/7.|

The CO2 measurement of the GMW80 series is based on a second-generation CARBOCAP® sensor, which uses a novel, microglow light source instead of an incandescent light bulb for a longer trouble-free lifetime. The internal reference in the CO2 sensor guarantees the best stability and operation also in constantly occupied buildings without frequent readjustments. The CARBOCAP® sensors give correct CO2 measurements immediately when powered on as they have a built-in reference measurement. Proper operation can be verified immediately after snapping on the device cover.

The following product models are available: GMW83RP, GMW83DRP, GMW83, GMW83A, GMW83D, GMW84, GMW84S, GMW87 and GMW88.

Watanabe Isolator which outputs DC signal proportional to the input signals 

Features

• Space-saving and weight-saving by unifying converter and terminal block
• DIN rail mount
• 2 outputs
• Input / Output / Power supply isolated

The Vaisala Dewpoint and Pressure Transmitter DPT146 for Compressed Air makes monitoring compressed air simple and convenient. The Vaisala Dewpoint Transmitter for Compressed Air DPT146 measures both dew point and process pressure simultaneously, and is the ideal choice for anyone using or monitoring compressed air.

- The first transmitter that monitors both dew point and process pressure
- A simple and convenient transmitter for monitoring of compressed air
- Highly accurate humidity information thanks to online pressure-compensated dew point data
- Proven sensor technology
- Compatible with the Vaisala Hand-Held DM70 for easy spot checking, local - display and data logging
- Pressure: 1…10 bar
- Dew point: -60 ... +30 °C 

Original Dickson Chart Papers
Packing: 60 sheets/pk

Kalinsky differential pressure gauge / differential pressure transmitter DMG5 was developed for supervising overpressure of cleanrooms.

A differential pressure sensor range +/- 50 Pa, red LED-display, alarm-lamp, signal horn, analogue output 0-10 V and 4-20 mA for connection with data logger, 2 switching outputs with adjustable threshold value and an additional circuitry to store the alarm message at increasing pressure in the normal range after fall back of the threshold value of the switching output are included.

By using of a red button at the front its possible to reset the alarm message. A software controlled signal damping for display and switching outputs can selected by 10 steps.

The PDT101 differential pressure transmitter is designed for demanding cleanroom applications. The sensor integrates with the Vaisala viewLinc monitoring system to measure and monitor pressure differentials in regulated environments. Ideal for high performance cleanroom environments in the life science, semiconductor and electronics industries.

Vaisala PTB330 Digital barometer is Designed for measurements in a wide environmental pressure and temperature range. Ideal for use e.g. as ship barometers, transfer standards and replacements for mercury barometers.

Watanabe developed WPMZ series as multi-display digital panel meter matched to the production site, and focused on the basic performance such as [1. Easy to read] [2. Easy to use].

WPMZ is a product that can cover various requirements, such as process monitoring, quality judgement etc. at the production site for various applications and environment.

Sato Desktop type Digital PH meter SK-650PH 6427-00 (Probe is separately sold).

Attached sensor arm is convenient to use the stirrer.

Sensor sensitivity display, data memory and many functions are equipped.

This model is not usable for certification purpose

Duct Mounted Vaisala Carbon Dioxide Transmitter Series GMD20 are specially designed for demand-controlled ventilation (DCV). They are easy to install and require no maintenance.

The GMD20 transmitters use the silicon-based Vaisala CARBOCAP® Sensor. The simple structure and reference measurement capabilities make this Single-Beam, Dual-Wavelength NDIR sensor extremely stable and reliable. The CO2 concentration is measured inside the duct without risks for leaks or wrong flow direction affecting the measurement. In addition, the measurement accuracy is not affected by dust, water vapor and most chemicals.  5-year warranty is valid for instruments purchased in 2021 and beyond.

Duct Mounted Vaisala GMD20 series transmitters can be used independently, or incorporated into building energy management systems. The series consists of duct mount units GMD20 and GMD20D. Version D has a display. The duct units' compact sensor head design fits inside the ventilation duct, eliminating the risk of leaking gaskets and measurement errors.

Duct Mounted Vaisala Carbon Dioxide Transmitter Series GMD110 are specially designed for for high-accuracy measurements in HVAC applications. They are easy to install and require no maintenance.

The Vaisala Carbon Dioxide transmitters GMD110 use Vaisala CARBOCAP® Sensor. The simple structure and reference measurement capabilities make this Single-Beam, Dual-Wavelength NDIR sensor extremely stable and reliable. The CO2 concentration is measured inside the duct without risks for leaks or wrong flow direction affecting the measurement. In addition, the measurement accuracy is not affected by dust, water vapor and most chemicals.  5-year warranty is valid for instruments purchased in 2021 and beyond.

Installation of the Tokico emergency shutoff valve is required at various industrial equipments by the High Pressure Gas Safety Law and the Fire Defense Law.

In the MB series of emergency shutoff valve, CO2 gas cartridge with high initial torque is adopted as drive source, and ball valve making smooth movement is adopted at the valve part.

It shutoffs urgently or opens the pipelines of various fluids and is most suitable as safety disaster prevention equipment which prevents second disaster from occurring.

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.

The ones introduced here are Aichi Tokei's standard governors

• Governor for high temperature gas
• Governor with the precise adjustment handle
• Governor for gas that contains sulfide
• Other special governors

The flow meter for gas mixing uses a KOFLOC multiple flow meter to mix multicomponent fluids. Connection of pipes to respective gas inlets and the mixed gas outlet permit gases to be mixed. This flow meter is ideal for easy gas mixing in laboratories and studies.

Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.

Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.

It comes with stainless steel float and a metering a valve.

MSR MA-4 Freon Analog transmitter for the continuous monitoring of gases and vapours in the ambient air. Used in garages, chiller rooms and heating systems, the µ-Gard MA series analog transmitter is a reliable gas detector.

For the detection of gases within a wide range of commercial applications. Due to the 4 – 20 mA or 0 - 10 V analog signal the transmitter is compatible to the µ-Gard gas controller series ADC of MSR-E.

MSR measures gas efficiently at mininum wiring expenditure (Radio-Sensor/Transmitter RT). With most diverse measurement, MSR is experienced in detecting combustible and toxic gases. Using the MSR components, you will have higher investment return and lower maintenance costs.

Applications examples:

- Parking Garages - continuous monitoring of harmful CO content in air
- Diesel-Truck Garages and Cargo Areas - continuous monitoring of harmful NOx content in air
- Refrigeration Plants - early detection and warning of refrigerant leaks
- Laboratories - continuous monitoring of oxygen in air
- Heating systems - early detection and warning of combustible gases

The Vaisala Hand-held Carbon Dioxide (CO₂) Meter GM70 measures volume concentration of CO2 in the units of ppm or %.

It is a user-friendly meter for demanding spot measurements in laboratories, greenhouses, mushroom farms, and for ensuring CO2 safety during soft drink bottling processes. The measurement accuracy is not affected by dust, water vapor or most chemicals.

The meter can also be used in HVAC and industrial applications, and as a tool for checking Vaisala's fixed CO2 instruments. Also the GMW90  can also be adjusted by using the GM70 meter.

Sato WBGT Heat Stress Monitor Model SK-170GT is a handy type instrument that can measure temperature, humidity and globe temperature to measure the WBGT index.
This can be used as a guide for preventing heat stroke and estimating heat stress of working and activity environments.
(Conforming to JIS B 7922 Class 2)

Vaisala HPP270 series is designed for demanding hydrogen peroxide bio-decontamination where repeatable, stable, and accurate measurement is essential.

The Vaisala HPP270 probe is suitable for a variety of applications such as isolator, material transfer hatch and room biodecontamination.

The Vaisala CARBOCAP® Carbon Dioxide Probe GMP231 is designed to provide incubator manufacturers with accurate and reliable carbon dioxide measurements and sterilization durability at high temperatures, up to 180 °C. The GMP231 probe is based on Vaisala’s patented CARBOCAP® technology and a new type of infrared (IR) light source. 

>The GMP231 probe’s sensor performance is optimized at 5 % CO2  but the sensor measures CO2 up to 20 % with high accuracy. The GMP231 is t's installed through the incubator wall; only the IR sensor and optical components are exposed to the incubation environment. 

In addition, the GMP231 can measure pressure and temperature for CO2 measurement compensation purposes, ensuring the product remains stable and accurate in all CO2 incubation conditions.

The sensor is made of highly durable materials to achieve outstanding stability over both time and temperature. Since water vapor, dust, and most chemicals do not affect measurements, the GMP231 module is ideal for CO2 incubator environments.

Original Isuzu Chart Papers

Kobayashi offer a wide variety of products for instruments used in analysis and measurement of temperature, humidity, wind direction, wind speed, pressure. Kobayashi paper is used for a comprehensive range of applications from weather, medicine, machinery and steel, to chemicals, pharmaceuticals, monitoring and analysis.

We are the distributor of Koyashi Chart Paper, the first company in Japan to produce and sell recording paper.

• Kobayashi
• Sato
• Sekonic
• Isuzu
• Dickson
• Chino
• Hisamatsu

If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.

Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.

RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Aichi Tokei Magnetic Flow Sensors For Liquids with Display

Model NW (Local display type)
Model NW-P (With pulse output)

Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Vaisala Oil Moisture Transmitter MMT330 enables fast and reliable detection of moisture in oil. The MMT330 can be used in on-line moisture monitoring and as a control device, allowing separators and oil driers to be started only when needed. Proper monitoring saves both oil and the environment. With the MMT330 it is easy and economical to monitor the effects of moisture in oil.

TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range

• Electronic Version
• Diesel 
• Crude Palm Oil (CPO)
• Petrol
• Heavy Oil
• Light Oil

TOKICO FLOWMETER, TOKICO OIL FLOWMETER is a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.

• Diesel 
• Crude Palm Oil (CPO)
• Petrol
• Heavy Oil
• Light Oil

The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves

The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).

Watanabe Isolator which outputs DC signal proportional to the input signals (2-output)

Features

• Space-saving and weight-saving by unifying converter and terminal block
• DIN rail mount
• 2 outputs
• Input / Output1 / Output2 / Power supply isolated

The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.

Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.

Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.

The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.

Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

The Vaisala Hand-Held Portable Dew point Meter DM70 measures dew point temperature accurately in a wide measurement range: from -60ºC to +60ºC. DM70 incorporate Vaisala's advanced DRYCAP technology, which enables reliable and high performance dew point measurement.

The probe withstands condensation and also measures directly in pressurized spaces. It also has a versatile and easy-to-use menu based user interface and clear graphical LCD display with data-logger function.

It can also be used as a tool for reading the output of fixed Vaisala dew point transmitters like DMT340 It has a truly fast response time between start-up from ambient conditions to low and high process dew points

Also suitable for measuring dryness of SF₆ gas

The Vaisala HUMICAP Hand-held Moisture Meter for Oil MM70 enables reliable detection of moisture in oil. Among its main attraction are:

Kent Elster Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.

The Kofloc mass flow controllers and meters, which measure the mass flow rate, are less influenced by the temperature and pressure as compared with mechanical flow meters and valves, and can electrically exchange information about the flow rate. They are used in a wide range of processes and equipment in the fields where high levels of accuracy, repeatability, responsiveness and cost effectiveness are required, such as semiconductors, optic fibers, various analyses, fuel cells, liquid crystal, organic electroluminescence, biotechnology, foods, environmental measurement, combustion gas control, plant facilities and examination equipment.

Models: 
EXE-Flow Model EX-700R Series
EX-250S Series
EX-550 series
8700 series
3660 series
3760 series
3200 series
3100 series
5100 series
5410 series

Prescale Pressure Film measures and visualizes pressure range. When presure is applied, the micro capsules are broken and the color-forming material reacts with the color-developing material. Red patches appear on the film.

It is simple to use this Dickson pressure logger PR125, PR325, PR525, PR120, PR320 to record and integrate pressure data into documents and spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, this logger is the perfect instrument.

Dickson Pressure Recorder PW4 and PW8 series comes with weather-resistant case-- the outdoor pressure monitoring solution of choice

We supplies variety range of recording consumables, such as recording pen, ink ribbon, recording head, cartridge pen, refillable ink and others for recorder and thermohygrograph of various brands, such as:

• ABB Kent
• Dickson
• Hisamatsu
• Isuzu
• Sato
• Sekonic
• Yokogawa

Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.