There are 48 products.
Active filters
Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300
The Vaisala Dewpoint, Pressure and Temperature Multiparameter Transmitter DPT145 for SF6 Gas is a unique innovation that enables online measurement of dew point, pressure, and temperature. It also calculates four other values, including SF6 density. The DPT145 is especially well suited for integration into OEM systems.
- First transmitter to offer online measurement of seven SF6 parameters in one unit
- Measured parameters: dew point, pressure, temperature
- Calculated parameters: SF6 density, normalized pressure, dew point in atmospheric pressure, ppm
- Saves time and money across the board, from investment and installation to operation and servicing
- More reliable assessment of the condition of SF6 insulation due to online measurement
- Long calibration interval of years
Vaisala Indigo80 Handheld Indicator is an industrial-grade portable diagnostics tool. Accommodating up to two Vaisala measurement probes, Indigo80 is ideal for spotchecking and process monitoring, as well as for configuring, troubleshooting, calibrating, and adjusting Vaisala Indigo-compatible probes and transmitters.
Vaisala HMP80 probes are based on Vaisala HUMICAP® sensor technology and are optimized for portable humidity and temperature measurements with the Indigo80 Handheld Indicator.
Vaisala DMP80 probes is optimized for portable data logging and measurement spot-checking of process dew point measurements in a wide range of temperatures and pressure ranges.
Vaisala GMP80P CARBOCAPâ Portable Carbon Dioxide Probe with Pump Sampling GMP80P combines intelligent CO2 measurement with pump-aspirated sampling functionality.
Vaisala PTB110 Analog Barometer is designed both for accurate barometric measurements at room temperature and for general environmental pressure monitoring over a wide temperature range. Ideal for system integrations, and widely used in marine buoys and weather stations.
Sato Barometer 7612-00 Baromex A barometer with a digital thermometer.
The index pointer enables you to see changes in atmospheric pressure.
The bracket made of ABS resin for wall mount makes the installation easy.
Sato Barometer 7610-20 is an authentic barometer used for meteorological observations.
You can easily find the variation of air pressure with the reference pointer.
Its classical design with the brass frame makes a great interior decor.
Vaisala BAROCAP® Digital Barometer PTB330 is a new generation barometer designed for a wide range of highend atmospheric pressure measurement.
The pressure measurement of the PTB330 is based on the Vaisala in-house, silicon capacitive, absolute pressure sensor – the Vaisala BAROCAP® Sensor. It provides high measurement accuracy and excellent long-term stability.
High accuracy The PTB330 series features extremely high accuracy. Class A barometers for the most demanding applications are fi ne-adjusted and calibrated against a high-precision pressure calibrator.
All the PTB330 barometers come with a NIST traceable, factory calibration certifi cate, also optional ISO/IEC 17025 accreditation calibration services are available. Reliability through redundancy
Stop the loss. The Vaisala CARBOCAP® MGP262 continuously measures the methane concentration in offgas from your biogas upgrading unit to keep you from letting your profits go up in the air.
Focus on what matters. The MGP262 is the answer to the problem that some methane slip always occurs in the upgrading process. It helps you adjust your process so that you avoid greenhouse gas emissions while you can concentrate on producing the best biomethane possible
for smart control of biogas quality
Get more value out of waste by improved decision-making, and by reducing your operating costs. Vaisala CARBOCAP® MGP261 Multigas Probe for Methane, Carbon Dioxide and Humidity helps in improving your process and in protecting the Combined Heat and Power (CHP) engine. The MGP261 probe is compact in size, Ex certified, and can be installed directly into the gas line without the need for sample treatment.
>The measurement probe is suitable for applications such as anaerobic digestion of landfill, industrial and municipal waste, wastewater treatment, CHP engine monitoring, as well as active carbon filter monitoring.
The wall-mounted Vaisala GMW90 Series CARBOCAP® Carbon Dioxide, Temperature and Humidity Transmitters are especially suited for green building projects and demand controlled ventilation. The devices measure carbon dioxide and temperature and have an option for an additional humidity measurement.
The instruments come with a calibration certificate that meets traceability and compliance requirements. Traceability is easily maintained with field-exchangeable intelligent measurement modules. The transmitter can be blended into the interior design of the space where it is installed using the optional decorative cover.
MSR ADT transmitter with digital processing of the measured values and temperature compensation for the continuous monitoring of the ambient air and detection of combustible gases and vapours. The calibration routine with selective access release enables the comfortable calibration of the transmitter. In addition to the standard analog output (0) 4-20 mA or (0) 2- 10 V DC the ADT-23 is equipped with a RS-485 interface for different protocols. Two relays with adjustable switch threshold are available as an option.
for %-level measurements in life science incubators, cold storage facilities and all demanding applications
The Vaisala CARBOCAP® Carbon Dioxide Probe GMP251 is an intelligent, stand-alone, %-level probe for measuring CO2 in life science incubators, cold storage facilities, fruit and vegetable transportation, and in all demanding applications where stable and accurate percentage-level CO2 measurements are needed. The operating temperature range is -40 … +60 °C and the measurement range is 0 … 20%CO2.
The GMP251 is based on Vaisala’s unique,second-generation CARBOCAP® technology that enables exceptional stability. A new type of infrared (IR) light source is used instead of the traditional incandescent light bulb, which extends the lifetime of the GMP251. It has full temperature and pressure compensations of CO2 measurement – integrated temperature measurement for compensation purposes. The sensor head is heated to prevent condensation. Digital output over RS-485: Modbus & Vaisala Industrial Protocol. A calibration certificate is always included with the product
The GMP251 probe is part of the Indigo product family and can also be connected to the Indigo500 and Indigo200 series transmitters to extend its features, for example, for a display or relays.
The GMP251 can also be used with with the free Insight PC Software.
For spot-checking, the ideal choice is the Handheld CO2 Meter GM70.
The GMP251 replaces the following discontinued products: GMM221 and GMT221
for ppm-level measurements in agriculture, refrigeration, demanding HVAC, and for plant growth manufacturers
The Vaisala CARBOCAP® Carbon Dioxide Probe GMP252 is an intelligent, stand-alone, ppm-level probe. It's intended for measuring CO2 in agriculture, refrigeration, greenhouses, demanding HVAC applications, and for plant growth chamber manufacturers. It is suitable for harsh and humid CO2 measurement environments where stable and accurate ppm-level CO2 measurements are needed. The operating temperature range is -40 … +60 °C and the measurement range is 0 … 10 000 ppm CO2, and even up to 30 000 ppm CO2 with a slightly reduced accuracy.
The GMP252 can also be placed inside the Vaisala Radiation Shield DTR250 for measuring dynamically outdoor CO2 levels.
The GMP252 probe is part of the Indigo product family and can also be connected to the Indigo500 and Indigo200 series transmitters to extend its features, for example, for a display or relays.
The GMP252 can also be used with with the free Insight PC Software.
For spot-checking, the ideal choice is the Handheld CO2 Meter GM70.|
The GMP252 replaces the following discontinued products: GMM222 and GMT222
The Vaisala Carbon Dioxide (CO2) Probe GMP343 is an accurate and rugged probe-type instrument for ecological measurements.
Typical applications include CO2 soil respiration, ambient CO2 monitoring, plant growth chambers, and OEM applications.
The Vaisala Carbon Dioxide (CO2), Humidity and Temperature Transmitter is the most economical way to monitor both indoor air quality (IAQ) and human presence with one sensor. Inadequate ventilation results in elevated CO2 levels, causing drowsiness and decreased productivity. Good indoor air quality can be achieved based on occupancy levels. Energy is saved by minimizing the use of unconditioned outside air. 5-year warranty is valid for instruments purchased in 2021 and beyond.
For accurate and stable HVAC measurements, the wall-mounted Vaisala CARBOCAP® Carbon Dioxide and Temperature Transmitter Series GMW80 provides the best stability and reliability on the market, up to 15 years. These indoor air quality sensors designed for standard, demand-controlled ventilation applications. The GMW80 is ideal for buildings occupied 24/7.|
The CO2 measurement of the GMW80 series is based on a second-generation CARBOCAP® sensor, which uses a novel, microglow light source instead of an incandescent light bulb for a longer trouble-free lifetime. The internal reference in the CO2 sensor guarantees the best stability and operation also in constantly occupied buildings without frequent readjustments. The CARBOCAP® sensors give correct CO2 measurements immediately when powered on as they have a built-in reference measurement. Proper operation can be verified immediately after snapping on the device cover.
The following product models are available: GMW83RP, GMW83DRP, GMW83, GMW83A, GMW83D, GMW84, GMW84S, GMW87 and GMW88.
Vaisala Dewpoint Transmitter DMT132 is an affordable dew point measurement instrument designed to verify the functionality of refrigerant dryers. The probe has excellent long-term stability and it is resistant to compressor oil. It is especially well suited for OEM dryer manufacturers.
Vaisala HUMICAP® Dewpoint Transmitter DMT132 is an affordable dew point measurement instrument designed to verify the functionality of refrigerant dryers. The probe has excellent long-term stability and it is resistant to compressor oil. It is especially well suited for OEM dryer manufacturers.
The Vaisala DRYCAP® Dewpoint Transmitter DMT152 is designed for measuring low dew point in OEM applications, even down to -80°C. The excellent long-term stability and reliability of its performance is based on the latest DRYCAP® polymer sensor technology. The DMT152 is an ideal choice for industrial applications where it is necessary to control very low humidity.
DMT152 is an ideal choice for the semiconductor industry, air and plastics dryers, glove boxes, dry chambers, pure gases, additive manufacturing, high voltage circuit breakers and other applications where it is critical to control humidity with high accuracy. DMT152 measures accurately and reliably also in the challenging combination of low humidity and hot air, which is typical in plastics drying.
The Vaisala DRYCAP® Dewpoint Transmitters DMT345 and DMT346 are designed for humidity measurement in industrial drying applications with particularly high temperatures. The high temperature tolerance of the sensor allows direct measurement from hot process without the need for a sampling system and sample conditioning. The wide dynamic rage of the measurement in DMT345 and DMT346 is unique: Measurements can be made from -40 °C frost point up to +100 °C dew point, with dry-bulb temperatures ranging up to 350 °C.
The Vaisala Dewpoint and Pressure Transmitter DPT146 for Compressed Air makes monitoring compressed air simple and convenient. The Vaisala Dewpoint Transmitter for Compressed Air DPT146 measures both dew point and process pressure simultaneously, and is the ideal choice for anyone using or monitoring compressed air.
- The first transmitter that monitors both dew point and process pressure
- A simple and convenient transmitter for monitoring of compressed air
- Highly accurate humidity information thanks to online pressure-compensated dew point data
- Proven sensor technology
- Compatible with the Vaisala Hand-Held DM70 for easy spot checking, local - display and data logging
- Pressure: 1…10 bar
- Dew point: -60 ... +30 °C
Kalinsky differential pressure gauge / differential pressure transmitter DMG5 was developed for supervising overpressure of cleanrooms.
A differential pressure sensor range +/- 50 Pa, red LED-display, alarm-lamp, signal horn, analogue output 0-10 V and 4-20 mA for connection with data logger, 2 switching outputs with adjustable threshold value and an additional circuitry to store the alarm message at increasing pressure in the normal range after fall back of the threshold value of the switching output are included.
By using of a red button at the front its possible to reset the alarm message. A software controlled signal damping for display and switching outputs can selected by 10 steps.
The PDT101 differential pressure transmitter is designed for demanding cleanroom applications. The sensor integrates with the Vaisala viewLinc monitoring system to measure and monitor pressure differentials in regulated environments. Ideal for high performance cleanroom environments in the life science, semiconductor and electronics industries.
Vaisala PTB330 Digital barometer is Designed for measurements in a wide environmental pressure and temperature range. Ideal for use e.g. as ship barometers, transfer standards and replacements for mercury barometers.
Duct Mounted Vaisala Carbon Dioxide Transmitter Series GMD20 are specially designed for demand-controlled ventilation (DCV). They are easy to install and require no maintenance.
The GMD20 transmitters use the silicon-based Vaisala CARBOCAP® Sensor. The simple structure and reference measurement capabilities make this Single-Beam, Dual-Wavelength NDIR sensor extremely stable and reliable. The CO2 concentration is measured inside the duct without risks for leaks or wrong flow direction affecting the measurement. In addition, the measurement accuracy is not affected by dust, water vapor and most chemicals. 5-year warranty is valid for instruments purchased in 2021 and beyond.
Duct Mounted Vaisala GMD20 series transmitters can be used independently, or incorporated into building energy management systems. The series consists of duct mount units GMD20 and GMD20D. Version D has a display. The duct units' compact sensor head design fits inside the ventilation duct, eliminating the risk of leaking gaskets and measurement errors.
Duct Mounted Vaisala Carbon Dioxide Transmitter Series GMD110 are specially designed for for high-accuracy measurements in HVAC applications. They are easy to install and require no maintenance.
The Vaisala Carbon Dioxide transmitters GMD110 use Vaisala CARBOCAP® Sensor. The simple structure and reference measurement capabilities make this Single-Beam, Dual-Wavelength NDIR sensor extremely stable and reliable. The CO2 concentration is measured inside the duct without risks for leaks or wrong flow direction affecting the measurement. In addition, the measurement accuracy is not affected by dust, water vapor and most chemicals. 5-year warranty is valid for instruments purchased in 2021 and beyond.
for Demanding Low Humidity Conditions
Condensation-resistant Vaisala Dewpoint Transmitter DMT340 is designed for industrial low-humidity applications such as industrial drying, compressed air systems, semiconductor industry, dry rooms, baking ovens, and metal heat treatment to provide accurate and reliable measurement.
MSR MA-4 Freon Analog transmitter for the continuous monitoring of gases and vapours in the ambient air. Used in garages, chiller rooms and heating systems, the µ-Gard MA series analog transmitter is a reliable gas detector.
For the detection of gases within a wide range of commercial applications. Due to the 4 – 20 mA or 0 - 10 V analog signal the transmitter is compatible to the µ-Gard gas controller series ADC of MSR-E.
MSR measures gas efficiently at mininum wiring expenditure (Radio-Sensor/Transmitter RT). With most diverse measurement, MSR is experienced in detecting combustible and toxic gases. Using the MSR components, you will have higher investment return and lower maintenance costs.
Applications examples:
- Parking Garages - continuous monitoring of harmful CO content in air
- Diesel-Truck Garages and Cargo Areas - continuous monitoring of harmful NOx content in air
- Refrigeration Plants - early detection and warning of refrigerant leaks
- Laboratories - continuous monitoring of oxygen in air
- Heating systems - early detection and warning of combustible gases
The Vaisala Hand-held Carbon Dioxide (CO2) Meter GM70 measures volume concentration of CO2 in the units of ppm or %.
It is a user-friendly meter for demanding spot measurements in laboratories, greenhouses, mushroom farms, and for ensuring CO2 safety during soft drink bottling processes. The measurement accuracy is not affected by dust, water vapor or most chemicals.
The meter can also be used in HVAC and industrial applications, and as a tool for checking Vaisala's fixed CO2 instruments. Also the GMW90 can also be adjusted by using the GM70 meter.
The Vaisala CARBOCAP® Carbon Dioxide Probe GMP231 is designed to provide incubator manufacturers with accurate and reliable carbon dioxide measurements and sterilization durability at high temperatures, up to 180 °C. The GMP231 probe is based on Vaisala’s patented CARBOCAP® technology and a new type of infrared (IR) light source.
>The GMP231 probe’s sensor performance is optimized at 5 % CO2 but the sensor measures CO2 up to 20 % with high accuracy. The GMP231 is t's installed through the incubator wall; only the IR sensor and optical components are exposed to the incubation environment.
In addition, the GMP231 can measure pressure and temperature for CO2 measurement compensation purposes, ensuring the product remains stable and accurate in all CO2 incubation conditions.
The sensor is made of highly durable materials to achieve outstanding stability over both time and temperature. Since water vapor, dust, and most chemicals do not affect measurements, the GMP231 module is ideal for CO2 incubator environments.
Kobayashi offer a wide variety of products for instruments used in analysis and measurement of temperature, humidity, wind direction, wind speed, pressure. Kobayashi paper is used for a comprehensive range of applications from weather, medicine, machinery and steel, to chemicals, pharmaceuticals, monitoring and analysis.
We are the distributor of Koyashi Chart Paper, the first company in Japan to produce and sell recording paper.
If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.
Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.
Vaisala Miniature size dew point transmitters DMT143 and DMT143L are ideal choices when you want to measure dew point accurately in small compressed air dryers, plastic dryers, additive manufacturing and other OEM applications. They are easy to integrate and can be used in Vaisala DM70 hand-held. The long version has replaced the DMT242.
The Vaisala Hand-Held Portable Dew point Meter DM70 measures dew point temperature accurately in a wide measurement range: from -60ºC to +60ºC. DM70 incorporate Vaisala's advanced DRYCAP technology, which enables reliable and high performance dew point measurement.
The probe withstands condensation and also measures directly in pressurized spaces. It also has a versatile and easy-to-use menu based user interface and clear graphical LCD display with data-logger function.
It can also be used as a tool for reading the output of fixed Vaisala dew point transmitters like DMT340 It has a truly fast response time between start-up from ambient conditions to low and high process dew points
Also suitable for measuring dryness of SF6 gas
Prescale Pressure Film measures and visualizes pressure range. When presure is applied, the micro capsules are broken and the color-forming material reacts with the color-developing material. Red patches appear on the film.
It is simple to use this Dickson pressure logger PR125, PR325, PR525, PR120, PR320 to record and integrate pressure data into documents and spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, this logger is the perfect instrument.
Dickson Pressure Recorder PW4 and PW8 series comes with weather-resistant case-- the outdoor pressure monitoring solution of choice
We supplies variety range of recording consumables, such as recording pen, ink ribbon, recording head, cartridge pen, refillable ink and others for recorder and thermohygrograph of various brands, such as:
Vaisala DRYCAP® Dew Point and Temperature Probe DMP5 is designed for in-line humidity measurement in industrial drying applications with high temperatures and a wide dew point range. The long and robust steel probe and optional installation flange allow easy installation with adjustable depth to reach through insulation, for example in ovens.
Vaisala DMP5 incorporates the Vaisala DRYCAP® sensor, which is accurate, reliable, and stable. The sensor is condensation-resistant and immune to particulate contamination, oil vapor, and most chemicals. Sensor warming minimizes the risk of condensation accumulating on the sensor. If the DRYCAP® sensor does get wet, it dries rapidly and recovers its swift response time. In low-humidity conditions the sensor will auto-calibrate to ensure accurate measurement.
Vaisala DMP5 is part of the Indigo family and is compatible with the Indigo500 and Indigo200 series transmitters. It can be used with Vaisala Insight PC software for data visualization, easy probe configuration, and self-calibration.
Vaisala DRYCAP® Dew Point and Temperature Probe DMP6 is designed for in-line humidity measurement in industrial drying applications with very high temperatures and a wide dew point range. A high temperature tolerance is achieved using a passive cooling set that conducts heat away from the probe and reduces the temperature to within the optimal range for the sensor.
Vaisala DMP6 incorporates the Vaisala DRYCAP® sensor, which is accurate, reliable, and stable. The sensor is condensation-resistant and immune to particulate contamination, oil vapor, and most chemicals. Sensor warming minimizes the risk of condensation accumulating on the sensor. If the DRYCAP® sensor does get wet, it dries rapidly and recovers its swift response time. In low-humidity conditions the sensor will auto-calibrate to ensure accurate measurement.
Vaisala DMP6 is part of the Indigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with the Vaisala Insight PC software for data visualization, easy probe configuration, and self-calibration.
Vaisala DRYCAP® Dew Point and Temperature Probe DMP7 is made for tight spaces and low-humidity applications. Its short probe length makes it suitable for installations that have limited space such as semiconductor manufacturing equipment. Other typical applications include industrial drying systems, compressed air systems, and dry rooms.
Vaisala DMP7 is part of the Indigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with the Vaisala Insight PC software for data visualization, easy probe configuration, and self-calibration.
Vaisala DRYCAP® Dew Point and Temperature Probe DMP8 is designed for industrial low-humidity applications with pressure up to 40 bars. Typical applications include industrial drying, compressed air systems, and applications in the semiconductor industry.
Vaisala DMP8 can be installed in a 1/2" NPT or ISO thread with adjustable insertion depth. An optional ball-valve installation kit allows the probe to be inserted or detached from a pressurized line.
Vaisala DMP8 is part of theIndigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with the Vaisala Insight PC software for data visualization, easy probe configuration, and self-calibration.
Vaisala VDL200 is an Ethernet-connected data logger for continuous monitoring systems.
It provides high accuracy measurements from up to 2 detachable humidity, temperature, and carbon dioxide probes.
Suitable applications include real-time measurements in environments where wired connections are preferred.
VDL200 is compatible with the Vaisala viewLinc Enterprise Server software.
Vaisala Indigo300 Transmitter is a host device for displaying measurement values from Vaisala Indigo-compatible probes and/or transmitting them to automation systems through analog signals.
for Vaisala's Smart Humidity, Temperature, Dew Point, Moisture in Oil, CO2 and H2O2 Probes
Vaisala Indigo200 Series host devices are part of Vaisala Indigo product family and intended for Vaisala's intelligent, stand-alone humidity probes (HMP1, HMP3, HMP4, HMP5, HMP7, HMP8 and HMP9), dew point probes (DMP5, DMP6, DMP7 and DMP8), temperature probe (TMP1), CO2 probes (GMP251 and GMP252), moisture in oil probe MMP8, as well as our vaporized hydrogen peroxide probe series HPP270: including HPP271 to measure hydrogen peroxide vapor (ppm), or the HPP272 to measure hydrogen peroxide vapor (ppm), temperature, and humidity (relative humidity and relative saturation). The HPP272 probe includes other calculated parameters such as dew point and vapor pressure measurements..
Looking for a transmitter with a metal enclosure? See Indigo500 series with dual-probe support and many more additional features.
Typical applications for the Indigo200 include industrial and compressed air drying, life science incubators, hatchers and setters, greenhouses, cold storage & refrigeration, food transportation, CO2 safety, hydraulic and lubrication oil monitoring, demanding HVAC such as animal shelters, swimming pools, parking garages, and facilities using vaporized hydrogen peroxide decontamination.
Vaisala Indigo 200 allows for easy evaluation and visualization of data, also wirelessly. The installation is uncomplicated, which saves time. Watch video on how to install Indigo201 and configure analog outputs. Also the probe types are interchangeable reducing downtime. The enclosure with an IP65 classification is safe for harsh environments and resistant to dust and most chemicals. The smooth surface of the enclosure makes cleaning easy.
The Vaisala Indigo, Indigo 510, Indigo 520 transmitter has 4 analog channels that can be configured to mA or voltage type and 2 configurable relays. The Vaisala Indigo510 has 2 analog channels. Any of the output parameters from the connected probes can be assigned to control the analog channels and relays. Digital output protocol is Modbus TCP/IP over Ethernet. Besides Modbus TCP/IP, the transmitter's Ethernet connection provides a web interface and cyber-security that meets the modern standards
The touchscreen display provides local data visualization and easy access to probe configuration. The transmitter also extends the options for connectivity, supply voltage and wiring, compared to using just a smart probe. It also provides mechanical support when wall-mount probe installation is preferred. Rugged IP66- and NEMA4-rated metal enclosure ensures reliable performance even in the harshest conditions.
The Indigo-compatible smart probes include humidity probes (HMP1, HMP3, HMP4, HMP5, HMP7, HMP8 and HMP9), dew point probes (DMP5, DMP6, DMP7 and DMP8), carbon dioxide probes (GMP251 and GMP252), moisture in oil probe (MMP8), temperature probe (TMP1), and vaporized hydrogen peroxide probes (HPP270). The Indigo520 is also compatible with MHT410 Moisture, Hydrogen and Temperature Transmitter for power transformer online monitoring
The Indigo520 dual-probe support allows simultaneous measurements with two Vaisala Indigo-compatible probes for humidity, temperature, dew point temperature, carbon dioxide, vaporized hydrogen peroxide, and moisture in oil measurements. If you need just one probe, the Indigo510 is an ideal choice.
Whisper Ultrasonic Leak Detector is ideal for detecting and locating sources of ultrasonic sound through the use of sophisticated electronic circuitry. Unaffected by audible noise, Whisper incorporates an Internal Noise Control allowing for use in extremely noisy environments, such as mechanical rooms, and around operating chillers. Because Whisper is designed to detect ultrasound at 40.5 kHz, not even a murmur will escape detection.
.png)
