Home

Hyoda (Japan) Waterproof Bimetal Thermometer AY Series
Model: AY4, AY5, AY4-QS, AY5-QS

MSR ADT transmitter with digital processing of the measured values and temperature compensation for the continuous monitoring of the ambient air and detection of combustible gases and vapours. The calibration routine with selective access release enables the comfortable calibration of the transmitter. In addition to the standard analog output (0) 4-20 mA or (0) 2- 10 V DC the ADT-23 is equipped with a RS-485 interface for different protocols. Two relays with adjustable switch threshold are available as an option.

Original Dickson Chart Papers
Packing: 60 sheets/pk

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.

The ones introduced here are Aichi Tokei's standard governors

• Governor for high temperature gas
• Governor with the precise adjustment handle
• Governor for gas that contains sulfide
• Other special governors

Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.

Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.

It comes with stainless steel float and a metering a valve.

MSR MA-4 Freon Analog transmitter for the continuous monitoring of gases and vapours in the ambient air. Used in garages, chiller rooms and heating systems, the µ-Gard MA series analog transmitter is a reliable gas detector.

For the detection of gases within a wide range of commercial applications. Due to the 4 – 20 mA or 0 - 10 V analog signal the transmitter is compatible to the µ-Gard gas controller series ADC of MSR-E.

MSR measures gas efficiently at mininum wiring expenditure (Radio-Sensor/Transmitter RT). With most diverse measurement, MSR is experienced in detecting combustible and toxic gases. Using the MSR components, you will have higher investment return and lower maintenance costs.

Applications examples:

- Parking Garages - continuous monitoring of harmful CO content in air
- Diesel-Truck Garages and Cargo Areas - continuous monitoring of harmful NOx content in air
- Refrigeration Plants - early detection and warning of refrigerant leaks
- Laboratories - continuous monitoring of oxygen in air
- Heating systems - early detection and warning of combustible gases

Original Isuzu Chart Papers

Hyoda (Japan) Waterproof Bimetal Thermometer S6

Hyoda (Japan) Waterproof Bimetal Thermometer M series
Model: M3, M4, M6

Hyoda (Japan) Explosion Proof  (d2G4)Thermometer ES-UT

Hyoda Japan Offers various types of thermometers: highly sensitive Bourdon-tube thermometer, high-output multi-contact thermometer with bellows equipped at pressure receiver, mechatronics type that incorporates an IC (integrated circuit) for transmission of multi-contact local directions and remote electric directions. Use these thermometers for temperature controls in a wide range.

Hyoda (Japan) Thermometer with MicroSwitch Model KME-2, KME-4.

RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Aichi Tokei Magnetic Flow Sensors For Liquids with Display

Model NW (Local display type)
Model NW-P (With pulse output)

Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves

The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).

Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

It is simple to use this Dickson pressure logger PR125, PR325, PR525, PR120, PR320 to record and integrate pressure data into documents and spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, this logger is the perfect instrument.

Dickson Pressure Recorder PW4 and PW8 series comes with weather-resistant case-- the outdoor pressure monitoring solution of choice

Isuzu Thermohygrograph TH27R TH-27R

All Dickson chart recorders feature a large 8″ or 6" chart and user-selectable recording timeframes (1-day, 1-week, 1-month) and ranges.

Dickson Touch Screen Data Logger TWP were made to simplify, yet enhance your monitoring experience. With a Dickson touchscreen TWP, you can view temperature, humidity or differential pressure data with nothing more than the touch of a finger. With access to your data right on the screen, proving historical monitoring during an audit has ever been easier.

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy.

Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Aichi Tokei Turbine gas meters TBZ and TBX series, developed to measure gas consumption of a small boiler, an individual furnace, or other individual gas equipment, are achieved to have high accuracy consists with the light-weighted compact stylish body.
They can widely correspond to maximum working pressure and maximum measuring flow-rate.
The built-in 2-systems pulse transmitter allows your configuration of a remote reading system or of an advanced energy management system. Also, TBZ series even offers temperature / pressure compensation function that is to display gas consumption converted to its volume at the standard conditions (0,1 atms ), etc.

Aichi Tokei Ultrasonic Gas Flowmeter

•Robust against oilmist and dust
•Turndown ratio 50:1
•Ultrasonic sensor is integrated
•Negligible pressure drop (equivalent to straight pipe)
•Easy to read LCD which can be oriented at a right angle for easy viewing
•2 outputs for easy integration with other system
•Lower cost than vortex flowmeters or clamp - on type flowmeters
•Options for power supply :
- Built-in batteries (10 years of continuous operation)
- DC power

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.