Temperature

DeltaTrak in-transit temperature loggers and recorders document temperature conditions during shipment.

• 16000 Series: disposable paper chart recorders with model-dependent recording periods from 5 to 90 days.
• FlashLink Mini PDF: single-use electronic logger with USB PDF and CSV reports.
• Choose according to shipment duration, temperature range and the receiving team's record requirements.

The Hyoda KME-2 and KME-4 provide temperature switching through a remote sensing bulb and one microswitch contact.

• KME-2 includes a temperature indicator.
• KME-4 operates without a temperature indicator.
• Liquid-filled and gas-filled configurations.
• Wall-mounted enclosure with IP43 drip-proof protection.
• Published contact rating: AC 125 V or 250 V / 5 A.

The Hyoda ES-UT is a liquid-filled temperature instrument with a remote sensing bulb and microswitch contacts.

• One or two microswitch contacts.
• Available temperature scales within −70 to 400°C.
• Wall-mounted enclosure with IP65 protection.
• Published explosion-proof designation: d2G4.
• Confirm approval suitability for the installation.

The Hyoda AY Series provides local temperature indication with a stainless steel exterior and IP65 protection.

• AY4 and AY5 with 100 and 125 mm dials.
• AY4-QS and AY5-QS with adjustable-angle heads.
• Available temperature scales within −50 to 500°C.
• Bimetal indication without a microswitch.
• Stem and connection selected for the installation.

The Hyoda S6 is a fluid-filled thermometer with a 150 mm dial and remote sensing bulb connected by capillary tube.

• Wall-mounted display for convenient temperature reading.
• S6 with IP43 protection; S6-WP with IP65 protection.
• Liquid-filled and gas-filled configurations.
• Indication-only or optional one or two pointer contacts.
• Optional maximum-temperature pointer.

The Hyoda M Series provides remote temperature indication through a sensing bulb and capillary tube.

• M3, M4 and M6 models with 75, 100 and 150 mm dials.
• Liquid-filled and gas-filled configurations.
• IP43 standard models and IP65 WP versions.
• Indication-only or pointer-contact configurations.

The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.

• Flexible head helps reduce errors caused by poor surface contact.
• Type K and Type E thermocouple options.
• Published configurations rated to 300°C, 500°C or 800°C.
• Select the probe geometry, cable and connector to suit your measurement setup.

The Sato SK-8950 measures surface temperature without contact, with a circular laser marker and adjustable emissivity to suit different materials.

• Measuring range: −60 to 550°C.
• Approximately 12:1 distance-to-spot ratio.
• Adjustable emissivity from 0.10 to 1.00.
• High/low alarms and MAX, MIN, AVG and DIF display.
• Backlit display and continuous measurement mode.
• IP54 protection against dust and water splashes.

For industrial surface measurements; not intended for clinical body-temperature measurement.

The Anritsu UX Series measures the temperature of moving and rotating surfaces. Its flexible head and contact-support mechanism help maintain contact and reduce shaking during measurement.

• Designed for moving and rotating surface measurements.
• Flexible head with contact support.
• Type K and Type E thermocouple options.
• Published configurations cover −50 to 200°C or −50 to 250°C, depending on model.

The Anritsu BC Series measures internal temperature in food, liquids and semi-solid materials. Its needle design reaches the measurement point inside the sample.

• Designed for food core-temperature measurement.
• IPX5 construction allows washing under running water.
• Type K and Type E thermocouple options.
• Choice of probe diameter, length, protective-pipe coating and connector.