Temperature

The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.

• Clip-type design for heat-pipe surface measurement.
• Published configurations cover −50 to 300°C.
• Type K and Type E thermocouple options.
• VA-03, VA-04, VA-05 and VA-06 model options.

The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.

• Type K thermocouple probes.
• HHT-4 configuration examples: −50 to 800°C.
• HHT-5 configuration examples: 300 to 1100°C.
• Different probe configurations to suit access to the measurement point.

The Anritsu SX Series features a flexible head that helps the sensing element maintain contact with the measurement surface.

• Contact-support head accommodates an angle of up to ±4°.
• Type K and Type E thermocouple options.
• Published configurations cover −50 to 300°C or −50 to 800°C, depending on model.
• Select the probe configuration, cable and connector to suit your application and instrument.

The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.

• Published model examples cover −100 to 200°C.
• Type K and Type E thermocouple options.
• Suitable for temperature checks and recording with a compatible instrument.
• Confirm the probe, cable and connector specifications when ordering.

Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.

• Measurement range: 0 to 500°C
• CR-31: for tip diameters below 1.5 mm
• CR-32: for tip diameters from 1.5 to 4 mm
• Type K and Type E models
• CRB base options for connection to compatible thermometers

Anritsu SF Series fine flexible temperature probes use extra-fine thermocouple wire in a Teflon-coated sheath for internal temperature measurement.

• Flexible construction for positioning in restricted spaces
• Type K and Type E configurations
• Published temperature range: −50 to 200°C
• Model references: SF-K-050, SF-K-100, SF-K-150 and SF-K-200
• Confirm the required length and instrument connector when ordering

Anritsu ST and STN flat leaf temperature probes feature thin, flexible sensing tapes for attachment to measurement surfaces.

• ST probe assemblies and STN replaceable sensing tapes
• Type K and Type E options, depending on configuration
• Selected versions rated up to 400°C; limits vary by model
• Choice of tape configurations, lengths and instrument connections
• Selection assistance for complete probes and replacement tapes

The Sato Mini-Cube 7008-10 records temperature and relative humidity on a seven-day paper chart for routine inspection and filing.

• Temperature range: −15 to 40°C.
• Humidity range: 5 to 100%RH, non-condensing.
• Quartz-controlled seven-day chart rotation.
• Replaceable cartridge pens.
• Powered by one AA zinc-carbon battery.
• Supplied with 55 sheets of seven-day chart paper.

The EDL DBB Series combines hot and cold black body targets for checking compatible infrared thermometers and pyrometers.

• DBB-350: Cold side −30 to 110°C; hot side ambient to 350°C.
• DBB-650: Cold side −30 to 110°C; hot side ambient to 650°C.
• 50.8 mm (2-inch) diameter targets.
• Provision for external reference sensors, sold separately.
• RS-232 interface and iTools software.
• 120 V and 240 V power versions available.

The EDL Practi-Cal Series provides dry-well and surface testing facilities for compatible temperature probes.

• PRI-1: Ambient to 350°C, aluminium block.
• PRI-2: Ambient to 650°C, brass block.
• Interchangeable wells and custom insert options.
• Provision for an independent reference probe.
• 0.1°C controller resolution.
• RS-232 interface and iTools software.