Hyoda (Japan) Drip Proof Bimetal Thermometer S6 Hyoda (Japan) Drip Proof Bimetal Thermometer S6
Hyoda (Japan) Drip Proof Bimetal Thermometer S6
Hyoda (Japan) Drip Proof Bimetal Thermometer S6
Hyoda (Japan) Drip Proof Bimetal Thermometer S6

Hyoda S6 Fluid-Filled Dial Thermometer

The Hyoda S6 is a fluid-filled thermometer with a 150 mm dial and remote sensing bulb connected by capillary tube.

  • Wall-mounted display for convenient temperature reading.
  • S6 with IP43 protection; S6-WP with IP65 protection.
  • Liquid-filled and gas-filled configurations.
  • Indication-only or optional one or two pointer contacts.
  • Optional maximum-temperature pointer.

Hyoda S6 Fluid-Filled Dial Thermometer

The Hyoda S6 is a wall-mounted thermometer with a 150 mm dial and a sensing bulb connected by capillary tube. This arrangement allows the display to be installed away from the measurement point, where it is easier to read.

Select an indication-only version or a configuration with pointer contacts for a compatible alarm or control circuit. The S6 uses a fluid-filled measuring system; for a bimetal alternative, see the AY Series comparison below.

S6 Specifications and Options

SpecificationDetails
Dial diameter 150 mm
Mounting Wall-mounted
Enclosure options S6: IP43; S6-WP: IP65
Liquid-filled range coverage −70 to 400°C
Gas-filled range coverage −200 to 600°C
Liquid-filled capillary length Single: 10 m; double: 30 m
Gas-filled capillary length 50 m
Contact configuration Indication only, or one or two pointer contacts
Contact rating AC 100 V / 0.4 A; AC 200 V / 0.2 A
Maximum-temperature pointer Optional

Range coverage describes the available configurations, not the scale of every instrument. Confirm the required standard scale, bulb dimensions, connection and capillary length when ordering.

Product Specifications and Dimensions

Hyoda S6 and S6-WP thermometer specifications and dimensions

Compare All Six Hyoda Thermometer Listings

Product / rangeInstrument typeDisplay / arrangementIndication / switchingProtectionSelection focus
M Series Fluid-filled; M3/M4/M6 and WP versions 75 / 100 / 150 mm; remote bulb Optional pointer contacts; M3: one, M4/M6: one or two IP43; WP: IP65 Remote reading with a choice of dial sizes
S6 / S6-WP Fluid-filled 150 mm; remote bulb Indication only or one/two pointer contacts IP43; WP: IP65 Large dial for remote temperature indication
AY Series Bimetal; AY4/AY5 and QS versions 100 / 125 mm; stem-mounted; QS adjustable head Temperature indication IP65 Local reading at the sensing stem
KME-2 / KME-4 Fluid-filled; wall-mounted KME-2: with indicator; KME-4: without indicator One microswitch contact IP43 Temperature switching with or without local indication
ES-UT Liquid-filled; wall-mounted Remote sensing bulb One or two microswitch contacts IP65; published explosion-proof designation d2G4 Applications requiring a suitable explosion-protected controller; confirm approval suitability
Fluid-Filled Thermometer Range General range listing; multiple configurations Depends on selected model Depends on selected model Depends on selected model Explore other Hyoda temperature indication and control options

The Fluid-Filled Thermometer Range is an overview listing, not a single model with one specification. Compare the exact model, temperature scale, sensing bulb, connection and mounting before ordering. S6 and M6 both have 150 mm dials, but this does not establish interchangeability.

Choosing the Right Thermometer

  • Operating temperature: provide the normal range and expected temperature extremes.
  • Process connection: confirm the thread or fitting, bulb diameter, insertion length and thermowell dimensions where applicable.
  • Display location: check the reading distance and route for the capillary tube.
  • Installation environment: choose the enclosure protection for the location and exposure.
  • Alarm or control requirement: specify the number of contacts and confirm electrical compatibility with the connected circuit.

Related Hyoda Thermometers

  • M Series — Fluid-filled thermometers with 75, 100 or 150 mm dials, remote sensing bulbs and optional pointer contacts.
  • AY Series — Bimetal thermometers for local temperature indication, with 100 or 125 mm dials and adjustable-head QS versions.
  • KME-2 / KME-4 — Fluid-filled temperature controllers with one microswitch contact; KME-2 includes an indicator, while KME-4 has no indicator.
  • ES-UT — Liquid-filled temperature controller with one or two microswitch contacts and an explosion-proof enclosure; confirm approval suitability for the installation.
  • Fluid-Filled Thermometer Range — Explore other Hyoda configurations for temperature indication and control, selected according to the measurement and installation requirements.

Need Help Selecting an S6 Thermometer?

Contact Seacom with your temperature range, sensing bulb dimensions, connection, capillary length and contact requirements. For a replacement, include photographs of the instrument nameplate and installation so we can help check the appropriate configuration.


Specific References

12 other products in the same category:

.

Waterproof Infrared Thermometer SK-8950

Sato SK-8950 Waterproof Infrared Thermometer with Circular Laser

The Sato SK-8950 measures surface temperature without contact, with a circular laser marker and adjustable emissivity to suit different materials.

  • Measuring range: −60 to 550°C.
  • Approximately 12:1 distance-to-spot ratio.
  • Adjustable emissivity from 0.10 to 1.00.
  • High/low alarms and MAX, MIN, AVG and DIF display.
  • Backlit display and continuous measurement mode.
  • IP54 protection against dust and water splashes.

For industrial surface measurements; not intended for clinical body-temperature measurement.

Anritsu AP-400 and AP-450 Handheld Thermo Printer

Anritsu AP-400 and AP-450 Handheld Thermo Printer

The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.

  • Single-channel handheld thermometer with built-in printer
  • Manual, interval and sequential-number printing
  • Stores up to 100 measurements for batch printing
  • AP-400 supports Type E or K with an ASP connector
  • AP-450 supports Type E, K, J, T or R with an ANP connector
  • Thermocouple type is selected when ordering and is not switchable
  • Powered by four AA batteries or an optional AC adaptor

Ask Seacom about the AP-400 Series

Sato Baromex 7612-00 Barometer with Digital Thermometer

Sato Baromex 7612-00 Barometer with Digital Thermometer

The Sato Baromex 7612-00 combines an easy-to-read analogue barometer with a digital thermometer for local atmospheric-pressure and room-temperature indication.

  • Atmospheric-pressure range from 945 to 1045 hPa
  • Dual pressure scale in hPa and mmHg
  • Movable index pointer helps indicate pressure change
  • Digital temperature display from 0 to 50 °C
  • Rear °C/°F temperature-selection switch
  • Compact wall mounting with the supplied bracket
  • Powered by one AA battery
Hyoda KME-2 & KME-4 Temperature Controllers with Microswitch

Hyoda KME-2 & KME-4 Temperature Controllers with Microswitch

The Hyoda KME-2 and KME-4 provide temperature switching through a remote sensing bulb and one microswitch contact.

  • KME-2 includes a temperature indicator.
  • KME-4 operates without a temperature indicator.
  • Liquid-filled and gas-filled configurations.
  • Wall-mounted enclosure with IP43 drip-proof protection.
  • Published contact rating: AC 125 V or 250 V / 5 A.
Waterproof Thermometer HR series

Anritsu HR Series High-Accuracy Handheld Thermometers

The Anritsu HR Series combines accurate Type K or Type E thermocouple measurement with a large display and an extensive choice of probes for surfaces, moving objects, liquids, air, food and specialised applications.

  • Type K range from −200 to +1,370 °C
  • Type E range from −200 to +800 °C
  • Selected models with waterproof protection equivalent to IPX5
  • Basic, standard, alarm, analogue-output, LED and memory versions
  • ASP or waterproof ANP probe connector according to model
  • Test report, soft case, hand strap and batteries included
Hyoda Liquid-Filled Thermometers and Temperature Controllers

Hyoda Liquid-Filled Thermometers and Temperature Controllers

Hyoda fluid-filled thermometers provide temperature indication and optional switching for industrial applications.

  • Liquid-filled and gas-filled configurations, depending on model.
  • Remote sensing arrangements with a bulb and capillary tube.
  • Indication-only, pointer-contact and microswitch options.
  • Model-specific dial sizes, mounting arrangements and enclosure protection.

Select the temperature scale, sensing arrangement and contact requirements to suit your installation.

Sato SK-1260 Waterproof Digital Thermometer with Memory and Alarm

Sato SK-1260 Waterproof Digital Thermometer with Memory and Alarm

The Sato SK-1260 is a handheld digital thermometer with memory and high/low alarms, supporting dedicated thermistor and Type K thermocouple probes.

  • Stores up to 180 readings manually or 120 readings automatically.
  • High and low temperature alarms.
  • MAX/MIN, HOLD and relative-temperature functions.
  • IPX4 protection against water splashes.
  • Probe options for liquids, food, air and surface measurements.
  • Optional printer for stored readings.

Available with the SK-S100K standard probe or as a main unit without a probe. Measuring range depends on the selected probe.

Hyoda (Japan) Explosion Proof Thermometer with MicroSwitch ES-UT

Hyoda ES-UT Explosion-Proof Thermometer with Microswitch

The Hyoda ES-UT is a liquid-filled temperature instrument with a remote sensing bulb and microswitch contacts.

  • One or two microswitch contacts.
  • Available temperature scales within −70 to 400°C.
  • Wall-mounted enclosure with IP65 protection.
  • Published explosion-proof designation: d2G4.
  • Confirm approval suitability for the installation.
Waterproof Digital Thermometer SK-270WP

Sato SK-270WP Waterproof Digital Thermometer

The Sato SK-270WP is a waterproof handheld digital thermometer with interchangeable probes for food temperature checks, liquids and quality control.

  • −40 to 250°C measuring range with the standard S270WP-01 probe.
  • 0.1°C display resolution.
  • IP67-rated main unit when connected to a probe.
  • HOLD, automatic power-off and temperature/time alarms.
  • Penetration, long-stem, immersion and surface probe options.

Measuring range and waterproof protection depend on the probe selected. The S270WP-41 surface probe is not waterproof.

Vaisala Portable Humidity Meter With Remote Probe Indigo80

Vaisala Indigo80 Portable Meter with HMP80 DMP80 GMP80P

The Vaisala Indigo80 is a robust handheld indicator and data logger for industrial spot checks, process diagnostics, field calibration and measurement data analysis.

  • Connect and display measurements from up to two compatible probes
  • Measure humidity, temperature, dew point, carbon dioxide and other industrial parameters
  • Use with HMP80, DMP80 and GMP80P portable measurement probes
  • Record up to approximately 5.5 million real-time measurement values
back to top