Home

Home

There are 23 products.

Sort by:
Sales, highest to lowest Relevance Name, A to Z Name, Z to A
Showing 1-23 of 23 item(s)

Active filters

  • Brand: Dickson
  • Brand: EDL
  • Brand: Hyoda
  • Brand: Isuzu
  • Brand: Kofloc
  • Brand: RCM
Kofloc

Back Pressure Valve 6800

The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.

Applications

  • Tank pressure control
  • Constant flow control of mixed gas
EDL Black Body Calibrator DBB
EDL

Black Body Calibrator DBB

EDL’s Single Black Body (SBB) IR Calibrators were designed for easy and reliable testing of virtually any in line or handheld infrared pyrometer/gun. The Single Black Body (SBB) is used for applications requiring only one temperature range. Lightweight and compact, the SBB is ideal for use in the lab or in the field. Units are available to cover the most tested temperatures: SBB-1 (low-range) accommodates temperatures from -30 °C up to 110 °C, SBB-2 (mid-range) accommodates temperatures from ambient up to 350 °C, and SBB-3 (high-range) accommodates temperatures from ambient up to 650 °C.

EDL Comparison Cryostat Calibrator CryoCal2
EDL

Comparison Cryostat Calibrator CryoCal2

EDL's Comparison Cryostat Calibrator (CRYO-CAL-2) is the most trusted cryogenic calibration device available on the market. This passively cooled cryostat allows the user to safely and affordably calibrate a range of temperature measurement devices from 77K (-196 °C) up to 0 °C. 

Dry Well Calibrator Practi-Cal
EDL

Dry Well Calibrator Practi-Cal

EDL Practi-Cal (PRI) Dry Well / Surface Calibrator (PRI) allows for easy testing and verification of virtually any size or shaped surface and insertion-style sensor – in one compact package. Utilizing an interchangeable dry well system, this calibrator has a uniform flat surface alongside a custom drilled insertion dry well. The PRI is ideal for use in the lab or in the field. It weighs in at under 30lbs., and can be taken virtually anywhere.

Kofloc

Flow Meter For Gas Mixing

The flow meter for gas mixing uses a KOFLOC multiple flow meter to mix multicomponent fluids. Connection of pipes to respective gas inlets and the mixed gas outlet permit gases to be mixed. This flow meter is ideal for easy gas mixing in laboratories and studies.

Hyoda

Liquid Filled Thermometer

Hyoda Japan Offers various types of thermometers: highly sensitive Bourdon-tube thermometer, high-output multi-contact thermometer with bellows equipped at pressure receiver, mechatronics type that incorporates an IC (integrated circuit) for transmission of multi-contact local directions and remote electric directions. Use these thermometers for temperature controls in a wide range.

RCM

Liquid Flow Switch

RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy

RCM

Orifice Flowmeter

The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves

The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).

Kofloc

Precise Mass Flowmeter

The Kofloc mass flow controllers and meters, which measure the mass flow rate, are less influenced by the temperature and pressure as compared with mechanical flow meters and valves, and can electrically exchange information about the flow rate. They are used in a wide range of processes and equipment in the fields where high levels of accuracy, repeatability, responsiveness and cost effectiveness are required, such as semiconductors, optic fibers, various analyses, fuel cells, liquid crystal, organic electroluminescence, biotechnology, foods, environmental measurement, combustion gas control, plant facilities and examination equipment.

Models: 
EXE-Flow Model EX-700R Series
EX-250S Series
EX-550 series
8700 series
3660 series
3760 series
3200 series
3100 series
5100 series
5410 series

Dickson

Pressure Data Logger PR series

It is simple to use this Dickson pressure logger PR125, PR325, PR525, PR120, PR320 to record and integrate pressure data into documents and spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, this logger is the perfect instrument.

EDL

Steel Cased Digital Thermometer Pocket-Probe

The STEEL CASED EDL Pocket-Probe® Digital Pyrometer is engineered to be durable! It's rugged, reliable, and consistently accurate with repeatable measurements. Pocket-Probe® pyrometers feature full range measurements and offer 0.1° resolution. The instrument is available with an optional shatterproof Lexan window display. 

Perfect for use on the production floor as well as in the lab! The Pocket-Probe® accepts mini-plug terminated sensors of the same thermocouple type. EDL instruments are hand crafted, made in the USA, and constructed from the finest materials available.

Dickson Touch Screen Data Logger TWP
Dickson

Touch Screen Data Logger

Dickson Touch Screen Data Logger TWP were made to simplify, yet enhance your monitoring experience. With a Dickson touchscreen TWP, you can view temperature, humidity or differential pressure data with nothing more than the touch of a finger. With access to your data right on the screen, proving historical monitoring during an audit has ever been easier.

EDL Ultra Bath Stirred Liquid Calibrator UB
EDL

Ultra Bath Calibrator UB

EDL offers a complete line of stirred liquid bath calibrators for temperatures from –40 °C up to 550 °C. The Ultra Bath has the highest stability and uniformity possible in any bath. We offer three standard bath models based on the specified temperature range.

Back to top
back to top