Bimetal Waterproof Thermometer AY Series
Hyoda (Japan) Waterproof Bimetal Thermometer AY Series
Model: AY4, AY5, AY4-QS, AY5-QS
There are 24 products.
Active filters
Hyoda (Japan) Waterproof Bimetal Thermometer AY Series
Model: AY4, AY5, AY4-QS, AY5-QS
Sekonic ST-50 (ST-50A) is microprocessor based thermohygrograph. Apart from measuring and recording temperature and relative humidity, it also has large LCD display and alarm output. Remote application is applicable with its electronic remote sensor.
Sekonic ST-50M is microprocessor based thermohygrograph. Apart from measuring and recording temperature and relative humidity, it also has large LCD display and alarm output. Remote application is applicable with its electronic remote sensor. ST-50M comes with extra memory slot for digital recording and time printing on chart.
Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.
Hyoda (Japan) Waterproof Bimetal Thermometer M series
Model: M3, M4, M6
Hyoda (Japan) Explosion Proof (d2G4)Thermometer ES-UT
Hyoda Japan Offers various types of thermometers: highly sensitive Bourdon-tube thermometer, high-output multi-contact thermometer with bellows equipped at pressure receiver, mechatronics type that incorporates an IC (integrated circuit) for transmission of multi-contact local directions and remote electric directions. Use these thermometers for temperature controls in a wide range.
Hyoda (Japan) Thermometer with MicroSwitch Model KME-2, KME-4.
RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy
Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.
MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.
The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.
The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves
The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).
Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
It is simple to use this Dickson pressure logger PR125, PR325, PR525, PR120, PR320 to record and integrate pressure data into documents and spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, this logger is the perfect instrument.
Dickson Pressure Recorder PW4 and PW8 series comes with weather-resistant case-- the outdoor pressure monitoring solution of choice
Sekonic C-7000 Handheld spectrometer, designed especially for industrial use.
Main Measurement & Function
All Dickson chart recorders feature a large 8″ or 6" chart and user-selectable recording timeframes (1-day, 1-week, 1-month) and ranges.
Dickson Touch Screen Data Logger TWP were made to simplify, yet enhance your monitoring experience. With a Dickson touchscreen TWP, you can view temperature, humidity or differential pressure data with nothing more than the touch of a finger. With access to your data right on the screen, proving historical monitoring during an audit has ever been easier.
Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy.
Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use
Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.
Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.