Home

The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.

Applications

• Tank pressure control
• Constant flow control of mixed gas

Sato Barometer 7612-00 Baromex A barometer with a digital thermometer.

The index pointer enables you to see changes in atmospheric pressure.

The bracket made of ABS resin for wall mount makes the installation easy.

Sato Barometer 7610-20 is an authentic barometer used for meteorological observations.

You can easily find the variation of air pressure with the reference pointer.

Its classical design with the brass frame makes a great interior decor.

The flow meter for gas mixing uses a KOFLOC multiple flow meter to mix multicomponent fluids. Connection of pipes to respective gas inlets and the mixed gas outlet permit gases to be mixed. This flow meter is ideal for easy gas mixing in laboratories and studies.

Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.

Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.

It comes with stainless steel float and a metering a valve.

DeltaTrak's In-Transit Temperature Chart Recorder, Model 16000-16502, is a highly reliable, time and temperature strip chart recorder used to record environmental conditions encountered during storage and transportation of food, pharmaceuticals, chemicals, and other temperature-sensitive commodities in refrigerated trucks, rail cars, ocean and air freight containers.

The In-Transit Temperature Chart Recorders are specially engineered with a light and durable vented case for superior air circulation and faster temperature response. These chart recorders provide maximum accuracy and generate a permanent record of transit conditions on a 36 inch (91 cm) strip chart. A view port allows the operator to visually confirm activation after pulling the start-up tab.

Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

Kent Elster Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.

The Kofloc mass flow controllers and meters, which measure the mass flow rate, are less influenced by the temperature and pressure as compared with mechanical flow meters and valves, and can electrically exchange information about the flow rate. They are used in a wide range of processes and equipment in the fields where high levels of accuracy, repeatability, responsiveness and cost effectiveness are required, such as semiconductors, optic fibers, various analyses, fuel cells, liquid crystal, organic electroluminescence, biotechnology, foods, environmental measurement, combustion gas control, plant facilities and examination equipment.

Models: 
EXE-Flow Model EX-700R Series
EX-250S Series
EX-550 series
8700 series
3660 series
3760 series
3200 series
3100 series
5100 series
5410 series

Sato Thermohygrograph NSII-Q, Sigma II, 7210-00, 7211-00
(as known as Sato Thermohygrograph SigmaII, Sato Thermohygrograph 7210-00, Sato Thermohygrograph 7211-00) comes with all transparent acryl-resin made case provides a full view of the chart paper without opening the case

Features:

* The required time cycle is selected by simply pushing the changeover switch
* Recording charts is made by non-dust paper and it is with holes for easy binding in a file .

Electromagnetic flow meters detect flow by using Faraday's Law of induction.

Inside an electromagnetic flow meter, there is an electromagnetic coil that generates a magnetic field, and electrodes that capture electromotive force(voltage). Due to this, although it may appear as if there is nothing inside the flow pipe of an electromagnetic flow meter, flow can be measured.

Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber.

With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be process externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flowmeters.

The positive displacement flow technology allows for precise flow measurement of most clean liquids regardless of the media conductivity. Other liquid properties also have a minimal effect on the performance of this type of meter. Flow profile conditioning is not required as with alternative flow technology options making oval gear installations simple to install in tight spaces and at an economical price.

Sato Temperature and Humidity datalogger.
Comes with software with graphical display on PC.
Three types of probes available.

Sato Temperature and Humidity datalogger SK-L750 SeriesComes with software with graphical display on PC.

SK-L751 (Temperature Measurement) Cat No 8800-00
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00

Sato 4-channel datalogger SK-L400T for temperature measurement with K type themocouple probes.

Possible to simultaneously display four temperatures from four different locations on the large LCD. The measured values can be logged on the SD card.

Probes are separately purchased, not included in the main unit.

Sato SK-RHC-1 Temperature Transmitter is electric current 4 to 20mA output type in the SK-RHC series temperature/humidity transmitters.

3 types of probe are provided for SK-RHC series transmitters.

Select the suitable probe to your usage.

AC adapter is available at option.

(The probe shown in the photo is the plug-in type)

Sato Thermohygrograph Mini-Cube 7008-10 is a compact thermohygrograph to fit everywhere at your convenience, with temperature range of −15 to 40°C and humidity range of 5 to 100%rh: 55 sheets of 7-day chart paper are attached.

This instrument can be used as a desktop or a wall-mount use.

Sato Thermohygrograph Mini-Alpha 7006-00 is a compact and lightweight (approx. 800g) thermohygrograph.

This instrument can be used as a desktop or a wall-mount use.

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy.

Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.

Sato SK-270WP-K is a simple operation waterproof digital thermometer.

Ideal for plants, laboratories, food factories and like that are required temperature management at the site using water.

Sato Waterproof DIgital Thermometer SK-1260 with memory and alarm functin.

Suitable for temperature control and data management in laboratories, factories and offices. Various optional probes are available for a wide variety of applications.

Standard probe SK-S100K(K Thermocouple) is attached as accessories.

>Note: No sensor convertibility for SK-1250MCIII α & SK-1260

Sato SK-8950 is a waterproof type Infrared thermometer having the circle laser marker that surrounds the measuring area with red laser.

The Waterproof/dustproof property is IP 54.

The measuring range is -60 to 550°C.

Emissivity is settable with 0.01 steps between 0.10 to 1.00