Cart
Custom content

This is custom content

  • Out-of-Stock
    Waterproof Digital Thermometer SK-270WP

Sato SK-270WP Waterproof Digital Thermometer

The Sato SK-270WP is a waterproof handheld digital thermometer with interchangeable probes for food temperature checks, liquids and quality control.

  • −40 to 250°C measuring range with the standard S270WP-01 probe.
  • 0.1°C display resolution.
  • IP67-rated main unit when connected to a probe.
  • HOLD, automatic power-off and temperature/time alarms.
  • Penetration, long-stem, immersion and surface probe options.

Measuring range and waterproof protection depend on the probe selected. The S270WP-41 surface probe is not waterproof.

Need advice or a quotation?

Ask Seacom about specifications, availability and the right instrument for your application.

Sato SK-270WP Waterproof Digital Thermometer

The Sato SK-270WP is a handheld thermometer with interchangeable thermistor probes for food temperature checks, liquid measurements and routine quality control. Choose a penetration, long-stem, immersion or surface probe to match the measurement point.

Key Features

  • Standard S270WP-01 probe measures from −40 to 250°C.
  • 0.1°C display resolution for clear temperature readings.
  • IP67-rated main unit when connected to a probe.
  • HOLD, automatic power-off and temperature/time alarm functions.
  • Interchangeable S270WP probes for different measurement tasks.

Sato SK-270WP thermometer front view

Sato SK-270WP thermometer rear view

Thermometer Specifications

SpecificationSK-270WP
Standard set Catalogue No. 8078-00: SK-270WP with S270WP-01 probe
Measuring range with standard probe −40.0 to 250.0°C
Maximum display range −50.0 to 300.0°C; usable measuring range depends on the connected probe
Resolution 0.1°C
Main-unit protection IP67 when connected to a probe; probe protection varies by model
Operating environment −10 to 60°C; below 80% RH, without condensation
Power supply Two AAA alkaline batteries
Approximate battery life 1,000 hours without buzzer; 500 hours with buzzer
Body dimensions 70 × 171 × 40 mm (W × H × D), excluding protrusions
Main-unit weight Approximately 155 g including batteries

Accuracy with the Standard S270WP-01 Probe

Temperature bandMeasuring accuracy
−40.0 to −10.0°C ±1.5°C
−9.9 to 105.0°C ±0.5°C
105.1 to 150.0°C ±0.7°C
150.1 to 199.9°C ±1.0°C
200.0 to 250.0°C ±1.5°C

These figures apply to the standard probe combination. Check the selected probe specification when using another model.

Temperature and Time Checks

Three temperature/time alarm settings support repeated checks within a HACCP procedure. Configure the target and holding time to suit your process. The instrument signals completion with a buzzer and LED.

Serial Number and Calibration Display

The startup display shows the unit serial number and, where recorded by Sato following recalibration, the calibration year and month. Users cannot enter this date themselves. Ask Seacom about calibration documentation for the thermometer and selected probe.

SK-270WP serial number and calibration date display examples

Select an S270WP Probe

Compare the sensing dimensions and temperature range below. The stem rating does not mean that the handle, cable or thermometer can be exposed to the same temperature. These probes are not compatible with SK-250WPII thermometers.

S270WP-01 Standard Probe

SpecificationS270WP-01

Sato S270WP-01 standard probe dimensions

Catalogue number 8079-01
Sensing section 3 mm diameter × 100 mm; pointed
Measuring range −40 to 250°C
Approximate cable length 0.7 m
Probe protection IPX7 when connected to the main unit

S270WP-02 Penetration Probe

SpecificationS270WP-02

Sato S270WP-02 penetration probe dimensions

Catalogue number 8079-02
Sensing section 3 mm diameter × 200 mm; pointed
Measuring range −40 to 250°C
Approximate cable length 0.7 m
Probe protection IPX7 when connected to the main unit

S270WP-03 Long-Stem Probe

SpecificationS270WP-03

Sato S270WP-03 long-stem probe dimensions

Catalogue number 8079-03
Sensing section 3 mm diameter × 400 mm; round end
Measuring range −40 to 250°C
Approximate cable length 0.7 m
Probe protection IPX7 when connected to the main unit

S270WP-04 Slim Penetration Probe

SpecificationS270WP-04

Sato S270WP-04 slim penetration probe dimensions

Catalogue number 8079-04
Sensing section 2 mm diameter × 150 mm; pointed
Measuring range −40 to 250°C
Approximate cable length 0.7 m
Probe protection IPX7 when connected to the main unit

S270WP-05 Stepped Penetration Probe

SpecificationS270WP-05

Sato S270WP-05 stepped penetration probe dimensions

Catalogue number 8079-05
Sensing section 2 mm diameter × 45 mm + 3 mm diameter × 55 mm; pointed
Measuring range −40 to 250°C
Approximate cable length 0.7 m
Probe protection IPX7 when connected to the main unit

S270WP-06 Low-Temperature Probe

SpecificationS270WP-06

Sato S270WP-06 low-temperature probe dimensions

Catalogue number 8079-06
Sensing section 3 mm diameter × 100 mm; pointed
Measuring range −40 to 40°C
Approximate cable length 0.7 m
Probe protection IPX7 when connected to the main unit

S270WP-21 Sleeve-Type Probe

SpecificationS270WP-21

Sato S270WP-21 sleeve-type probe dimensions

Catalogue number 8079-21
Sensing section 3 mm diameter × 420 mm; round end
Measuring range −40 to 200°C
Approximate cable length 1 m
Probe protection IPX7 when connected to the main unit

S270WP-31 Immersion Probe

SpecificationS270WP-31

Sato S270WP-31 immersion probe dimensions

Catalogue number 8079-31
Sensing section 17 mm diameter × 90 mm; cylindrical
Measuring range −40 to 105°C
Approximate cable length 5 m
Probe protection IPX7 when connected to the main unit

S270WP-41 Surface Probe

SpecificationS270WP-41
Catalogue number 8079-41
Sensing section 9 mm diameter sensing surface
Measuring range 25 to 200°C
Approximate cable length 0.8 m
Probe protection Not waterproof

Waterproof Use and Cleaning

Connect the probe correctly before cleaning the main unit. Follow the instruction manual for washing and alcohol wiping, and keep connectors clean and dry when changing probes. The S270WP-41 surface probe is not waterproof.

Choosing the Right Probe

  • Food and sample penetration: select a stem diameter and length suitable for the sample.
  • Deeper measurement points: compare the long-stem S270WP-03 and sleeve-type S270WP-21.
  • Immersion measurements: consider the S270WP-31 within its −40 to 105°C range.
  • Flat surfaces: use the S270WP-41 within its 25 to 200°C range and keep it dry.

Need Help Selecting an SK-270WP Thermometer?

Contact Seacom Process Instruments Sdn Bhd with your temperature range, sample type, required insertion depth and calibration requirements. For a replacement probe, send the full model number or a photograph of its label.

View more Sato instruments.

Product documents

Catalogues, manuals and other files available for this instrument.

Sato Waterproof Catalogue

Waterproof Digital Thermometer SK-270WP

1.83MB
Download

16 other products in the same category:

Sato HIGHEST II Thermo-Hygrometer | Seacom
  • Out-of-Stock

The Sato HIGHEST II combines a dial hygrometer and digital thermometer for convenient local checks of room temperature and humidity.

  • Humidity range: 20 to 100% RH.
  • Temperature range: 0 to 50°C.
  • Human hair humidity sensor and thermistor temperature sensor.
  • 2% RH dial graduations and 0.1°C temperature display resolution.
  • 135 mm diameter body with wall-mount bracket.
  • Powered by one AA battery.
Hyoda (Japan) Explosion Proof Thermometer with MicroSwitch ES-UT
  • Out-of-Stock

The Hyoda ES-UT is a liquid-filled temperature instrument with a remote sensing bulb and microswitch contacts.

  • One or two microswitch contacts.
  • Available temperature scales within −70 to 400°C.
  • Wall-mounted enclosure with IP65 protection.
  • Published explosion-proof designation: d2G4.
  • Confirm approval suitability for the installation.
Hyoda (Japan) Drip Proof Bimetal Thermometer S6
  • Out-of-Stock

The Hyoda S6 is a fluid-filled thermometer with a 150 mm dial and remote sensing bulb connected by capillary tube.

  • Wall-mounted display for convenient temperature reading.
  • S6 with IP43 protection; S6-WP with IP65 protection.
  • Liquid-filled and gas-filled configurations.
  • Indication-only or optional one or two pointer contacts.
  • Optional maximum-temperature pointer.
Sato Baromex 7612-00 Barometer with Digital Thermometer
  • Out-of-Stock

The Sato Baromex 7612-00 combines an easy-to-read analogue barometer with a digital thermometer for local atmospheric-pressure and room-temperature indication.

  • Atmospheric-pressure range from 945 to 1045 hPa
  • Dual pressure scale in hPa and mmHg
  • Movable index pointer helps indicate pressure change
  • Digital temperature display from 0 to 50 °C
  • Rear °C/°F temperature-selection switch
  • Compact wall mounting with the supplied bracket
  • Powered by one AA battery
Vaisala Portable Humidity Meter With Remote Probe Indigo80
  • Out-of-Stock

The Vaisala Indigo80 is a robust handheld indicator and data logger for industrial spot checks, process diagnostics, field calibration and measurement data analysis.

  • Connect and display measurements from up to two compatible probes
  • Measure humidity, temperature, dew point, carbon dioxide and other industrial parameters
  • Use with HMP80, DMP80 and GMP80P portable measurement probes
  • Record up to approximately 5.5 million real-time measurement values
Waterproof Thermometer HR series
  • Out-of-Stock

The Anritsu HR Series combines accurate Type K or Type E thermocouple measurement with a large display and an extensive choice of probes for surfaces, moving objects, liquids, air, food and specialised applications.

  • Type K range from −200 to +1,370 °C
  • Type E range from −200 to +800 °C
  • Selected models with waterproof protection equivalent to IPX5
  • Basic, standard, alarm, analogue-output, LED and memory versions
  • ASP or waterproof ANP probe connector according to model
  • Test report, soft case, hand strap and batteries included
Hyoda KME-2 & KME-4 Temperature Controllers | Seacom
  • Out-of-Stock

The Hyoda KME-2 and KME-4 provide temperature switching through a remote sensing bulb and one microswitch contact.

  • KME-2 includes a temperature indicator.
  • KME-4 operates without a temperature indicator.
  • Liquid-filled and gas-filled configurations.
  • Wall-mounted enclosure with IP43 drip-proof protection.
  • Published contact rating: AC 125 V or 250 V / 5 A.
Hyoda Liquid-Filled Thermometers & Controllers | Seacom
  • Out-of-Stock

Hyoda fluid-filled thermometers provide temperature indication and optional switching for industrial applications.

  • Liquid-filled and gas-filled configurations, depending on model.
  • Remote sensing arrangements with a bulb and capillary tube.
  • Indication-only, pointer-contact and microswitch options.
  • Model-specific dial sizes, mounting arrangements and enclosure protection.

Select the temperature scale, sensing arrangement and contact requirements to suit your installation.

Hyoda AY Series Bimetal Thermometers | Seacom
  • Out-of-Stock

The Hyoda AY Series provides local temperature indication with a stainless steel exterior and IP65 protection.

  • AY4 and AY5 with 100 and 125 mm dials.
  • AY4-QS and AY5-QS with adjustable-angle heads.
  • Available temperature scales within −50 to 500°C.
  • Bimetal indication without a microswitch.
  • Stem and connection selected for the installation.
EDL Pocket-Probe Steel-Cased Thermometer | Seacom
  • Out-of-Stock

The EDL Steel-Cased Pocket-Probe is a portable digital thermocouple thermometer for production, maintenance and laboratory temperature checks.

  • Durable steel housing with a protective cover.
  • Selectable °C and °F display with 0.1° resolution.
  • Available in separate Type K, J, E and T versions.
  • Accepts matching miniature-plug thermocouple probes.
  • Optional peak hold, magnetic backing and Lexan display window.

Probes are sold separately. Match the probe’s thermocouple type and temperature range to the selected instrument.

Waterproof Infrared Thermometer SK-8950
  • Out-of-Stock

The Sato SK-8950 measures surface temperature without contact, with a circular laser marker and adjustable emissivity to suit different materials.

  • Measuring range: −60 to 550°C.
  • Approximately 12:1 distance-to-spot ratio.
  • Adjustable emissivity from 0.10 to 1.00.
  • High/low alarms and MAX, MIN, AVG and DIF display.
  • Backlit display and continuous measurement mode.
  • IP54 protection against dust and water splashes.

For industrial surface measurements; not intended for clinical body-temperature measurement.

Sato SK-1260 Waterproof Digital Thermometer | Seacom
  • Out-of-Stock

The Sato SK-1260 is a handheld digital thermometer with memory and high/low alarms, supporting dedicated thermistor and Type K thermocouple probes.

  • Stores up to 180 readings manually or 120 readings automatically.
  • High and low temperature alarms.
  • MAX/MIN, HOLD and relative-temperature functions.
  • IPX4 protection against water splashes.
  • Probe options for liquids, food, air and surface measurements.
  • Optional printer for stored readings.

Available with the SK-S100K standard probe or as a main unit without a probe. Measuring range depends on the selected probe.

Anritsu AP-400 & AP-450 Handheld Thermo Printer
  • Out-of-Stock

The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.

  • Single-channel handheld thermometer with built-in printer
  • Manual, interval and sequential-number printing
  • Stores up to 100 measurements for batch printing
  • AP-400 supports Type E or K with an ASP connector
  • AP-450 supports Type E, K, J, T or R with an ANP connector
  • Thermocouple type is selected when ordering and is not switchable
  • Powered by four AA batteries or an optional AC adaptor

Ask Seacom about the AP-400 Series

This website uses cookies to ensure you get the best experience on our website