Home

Home

There are 12 products.

Sort by:
Sales, highest to lowest Relevance Name, A to Z Name, Z to A
Showing 1-12 of 12 item(s)

Active filters

  • Brand: EDL
  • Brand: RCM
  • Brand: Watanabe
Watanabe 3 port Isolation Amplifier (High Gain) ZM-310
Watanabe

3 port Isolation Amplifier (High Gain) ZM-310

Watanabe 3 port Isolation Amplifier (High gain) ZM-310 is a high gain type 3-port isolation amplifier, and supports minute input (mV). In addition, since a transformer with a high coupling coefficient is used, loss is small and linearity is extremely excellent. Although it is a smalllinearity transformer, it has a high withstand voltage and high airtightness due to the case filling structure, making it ideal for isolating various signals such as transducer signal isolation and instrumentation signal isolation. Board mounting type with 2.54mm pitch allows for easy board layout.


Features

  • High gain
  • Compact and lightweight
  • Low current consumption
  • High CMR common mode noise rejection ratio
  • High insulation, high withstand voltage
EDL Black Body Calibrator DBB
EDL

Black Body Calibrator DBB

EDL’s Single Black Body (SBB) IR Calibrators were designed for easy and reliable testing of virtually any in line or handheld infrared pyrometer/gun. The Single Black Body (SBB) is used for applications requiring only one temperature range. Lightweight and compact, the SBB is ideal for use in the lab or in the field. Units are available to cover the most tested temperatures: SBB-1 (low-range) accommodates temperatures from -30 °C up to 110 °C, SBB-2 (mid-range) accommodates temperatures from ambient up to 350 °C, and SBB-3 (high-range) accommodates temperatures from ambient up to 650 °C.

EDL Comparison Cryostat Calibrator CryoCal2
EDL

Comparison Cryostat Calibrator CryoCal2

EDL's Comparison Cryostat Calibrator (CRYO-CAL-2) is the most trusted cryogenic calibration device available on the market. This passively cooled cryostat allows the user to safely and affordably calibrate a range of temperature measurement devices from 77K (-196 °C) up to 0 °C. 

Watanabe Digital Panel Meter WPMZ
Watanabe

Digital Panel Meter WPMZ

Watanabe developed WPMZ series as multi-display digital panel meter matched to the production site, and focused on the basic performance such as [1. Easy to read] [2. Easy to use].

WPMZ is a product that can cover various requirements, such as process monitoring, quality judgement etc. at the production site for various applications and environment.

Dry Well Calibrator Practi-Cal
EDL

Dry Well Calibrator Practi-Cal

EDL Practi-Cal (PRI) Dry Well / Surface Calibrator (PRI) allows for easy testing and verification of virtually any size or shaped surface and insertion-style sensor – in one compact package. Utilizing an interchangeable dry well system, this calibrator has a uniform flat surface alongside a custom drilled insertion dry well. The PRI is ideal for use in the lab or in the field. It weighs in at under 30lbs., and can be taken virtually anywhere.

RCM

Liquid Flow Switch

RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy

RCM

Orifice Flowmeter

The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves

The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).

Watanabe Output Isolator TW-2X
Watanabe

Output Isolator TW-2X

Watanabe Isolator which outputs DC signal proportional to the input signals (2-output)



Features

  • Space-saving and weight-saving by unifying converter and terminal block
  • DIN rail mount
  • 2 outputs
  • Input / Output1 / Output2 / Power supply isolated
Watanabe WSPF Series Plug-in Compact Signal Converters
Watanabe

Signal Converters WSPF Series

Watanabe Plug-in Compact Signal Converter

he most compact type of plug-in signal converter in Watanabe Electric Industry’s signal converter line.We offer a low-cost, compact type with a socket to easily plug and unplug from the main unit for simpler maintenance.

The product line also includes isolators, distributors (current loop supply), thermocouple converters, RTD converters, and potentiometer converters.

EDL

Steel Cased Digital Thermometer Pocket-Probe

The STEEL CASED EDL Pocket-Probe® Digital Pyrometer is engineered to be durable! It's rugged, reliable, and consistently accurate with repeatable measurements. Pocket-Probe® pyrometers feature full range measurements and offer 0.1° resolution. The instrument is available with an optional shatterproof Lexan window display. 

Perfect for use on the production floor as well as in the lab! The Pocket-Probe® accepts mini-plug terminated sensors of the same thermocouple type. EDL instruments are hand crafted, made in the USA, and constructed from the finest materials available.

EDL Ultra Bath Stirred Liquid Calibrator UB
EDL

Ultra Bath Calibrator UB

EDL offers a complete line of stirred liquid bath calibrators for temperatures from –40 °C up to 550 °C. The Ultra Bath has the highest stability and uniformity possible in any bath. We offer three standard bath models based on the specified temperature range.

Back to top
back to top