Home

The ONICON FT-3000 Series measures electrically conductive liquids in chilled-water, heating-water, condenser-water and other HVAC systems.

• Inline electromagnetic measurement with no moving parts.
• FT-3100 and FT-3200 transmitter options.
• Flow-rate and totalisation outputs, depending on configuration.
• Integral or remote transmitter mounting.
• Individually wet-calibrated with a calibration certificate.

The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.

• AT-10, AT-20, AT-30 and AT-40 models.
• Type K and Type E thermocouple options.
• Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
• Grip and no-grip options for AT-30 and AT-40.
• Match the probe connection to your thermometer or data logger.

The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.

• Grip, sleeve and terminal-box configurations.
• Sheath diameters from 0.25 to 8.0 mm.
• Type K and Type E options, depending on configuration.
• SUS316, SUS310S and Inconel sheath options.
• Temperature limits depend on diameter, material and coating.

The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.

• Type K and Type E thermocouple options.
• Different sensing heads and probe geometries.
• Model-specific upper temperature limits from 200°C to 800°C.
• Cable and connector options to match the measuring instrument.

The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.

• U-100 and U-200 head-size families.
• Guard and wheel configurations for different contact conditions.
• Type K and Type E thermocouple options.
• Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
• Select the probe geometry, cable and connector to suit the installation.

The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.

• Setting-type and grip-type configurations.
• Standard and heavy-duty versions.
• Flat and curved guard options, depending on the model.
• Type K and Type E thermocouples.
• Temperature range: −50°C to 250°C.

The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.

• Self-supporting designs with or without a standard grip.
• Type K and Type E thermocouple options.
• Different head sizes to suit the available contact area.
• Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.

The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.

• M2, M3, M4 and M5 mounting sizes.
• Type K and Type E thermocouple options.
• Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
• Select the cable length and connector to suit your installation and instrument.

The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.

• Six models covering wire diameters from 0.65 mm to 15 mm.
• Type K and Type E thermocouple options.
• Sensing temperature range of −50°C to 250°C.
• Select the cable and connector to suit your measuring instrument.

The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.

• Built-in magnets for secure attachment to magnetically receptive surfaces.
• Type K and Type E thermocouple configurations.
• Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
• Different sensing heads and cable options to suit the installation.

The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.

• S-100, S-200 and S-300: stationary surfaces.
• S-400: very small measurement surfaces.
• S-500 and S-600: moving and rotating surfaces.
• S-770 and S-780: self-supporting designs.
• Type K and Type E configurations with model-specific temperature ratings.

The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.

• Type K and Type E thermocouple options.
• Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
• Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
• Different insertion lengths, cables and connectors to suit the measurement task.