- New
- Out-of-Stock
Vaisala Viewlinc Cloud Suite
aisala Viewlinc Cloud Suite succeeds viewLinc Cloud and Jade Smart Cloud. Choose Professional Edition for industrial monitoring or GxP Edition for validated monitoring.
Vaisala Viewlinc Cloud Suite
Vaisala Viewlinc Cloud Suite is a managed cloud service for continuous environmental monitoring, alarming and reporting. It collects measurements such as temperature, relative humidity and carbon dioxide from compatible Vaisala loggers, probes and transmitters. Operators can review current readings, historical trends and alarms through a web browser.
Viewlinc Cloud Suite is the successor to Vaisala’s viewLinc Cloud and Jade Smart Cloud offerings. GxP Edition follows the original viewLinc Cloud for regulated facilities. Professional Edition builds on Jade Smart Cloud for industrial and commercial monitoring.
Key Features of Viewlinc Cloud Suite
- Continuous Monitoring for rooms, equipment and facilities with compatible wireless and wired instruments.
- Alarm Notifications by email when configured conditions are met. SMS is available as an add-on.
- Historical Records and Reports for reviewing trends and exporting measurement data in PDF or CSV format.
- Multi-site Monitoring for teams that need to review measurements from more than one location.
Selecting the Correct Viewlinc Cloud Suite Edition
| Edition | Typical Applications | Key Capabilities |
|---|---|---|
| Professional | Electronics and semiconductor facilities, warehouses and R&D laboratories. | Live monitoring, alarms, historical trends and reports for day-to-day operations. |
| GxP | Pharmaceutical cleanrooms, regulated cold rooms and GMP storage areas. | Continuous validation, tamper-evident audit records, controlled access and validation documentation to support FDA 21 CFR Part 11 and EU GMP Annex 11 requirements. |
Compatible Vaisala Monitoring Devices
| Device | Typical Use |
|---|---|
| RFL100 Wireless Data Logger and AP10 Access Point | VaiNet wireless monitoring for locations where running a network cable to each point is impractical. |
| VDL200 PoE Data Logger | Wired logging with power and data over Ethernet. Select the probe or input to suit the measurement. |
| Indigo510 and Indigo520 Transmitters | Connect selected Vaisala smart probes. Confirm the probe, parameter and firmware for the intended setup. |
For cleanroom differential pressure, confirm the transmitter, input and pressure range before ordering.
Viewlinc Cloud Suite and Jade Smart Cloud Comparison
Compare the two Cloud Suite editions with Jade Smart Cloud when selecting a new system or expanding an existing installation.
| Requirement | Jade Smart Cloud | Cloud Suite Professional | Cloud Suite GxP |
|---|---|---|---|
| Typical Applications | Existing Jade systems for general environmental monitoring. | Industrial and commercial sites, including electronics production, warehouses and laboratories. | GMP cleanrooms, regulated storage and other operations that require a validated monitoring system. |
| Monitoring and Reports | Live readings, historical trends, email alerts and report export. | Live readings, historical trends, email alarms and PDF or CSV reports. | Live readings, historical trends, email alarms and PDF or CSV reports. |
| Validation and Audit Records | General monitoring and record keeping. | General monitoring. The audit-trail Events view is available as an add-on. | Continuous validation, secure audit trails, validation documentation and a release-preview environment. |
| Supported Hardware Examples | RFL100 with AP10, VDL200 and Indigo510/520. Earlier systems may use CWL100 with CA10. | RFL100 with AP10, VDL200 and Indigo510/520. MHT410 is supported through a compatible Indigo500 transmitter. | RFL100 with AP10, VDL200 and Indigo510/520. |
| SMS Notifications | Optional add-on. | Optional add-on. | Optional add-on. |
SMS availability depends on the country and mobile network. Confirm the subscription and device compatibility for the project.
Moving from viewLinc Cloud to Cloud Suite GxP
The original viewLinc Cloud was designed for GxP monitoring with RFL100 wireless loggers and the AP10 access point. Cloud Suite retains that hardware option and adds support for the wired VDL200 logger and selected Indigo transmitters. For an existing installation, provide the device models and subscription details so Seacom can confirm which devices can be reused and whether historical records, audit trails and alarm settings can be transferred.
Related Vaisala Monitoring Systems
- Vaisala viewLinc Enterprise Server for projects that require an on-premises server.
- Continuous Monitoring Systems for compatible loggers, transmitters and system components.
Discuss your monitoring setup with Seacom
Send us your site location, measurement points, parameters and validation requirements. We can help select the edition, probes and wireless or wired configuration. Main contractors and system integrators are welcome.
You might also like
The Vaisala Indigo500 Series provides flagship industrial measurement integration: choose Indigo510 for a simplified single-probe system or Indigo520 for full dual-probe capability.
- Indigo510: one probe and two isolated analog outputs
- Indigo520: two probes, four isolated outputs and two relays
- Ethernet web interface and Modbus TCP communication
- Rugged IP66 and NEMA 4 metal enclosure
The Vaisala RFL100 uses secure, long-range VaiNet wireless technology to monitor temperature, relative humidity and carbon dioxide with the AP10 Access Point and viewLinc Continuous Monitoring System.
- At least 50 m typical indoor wireless range
- Up to 32 RFL100 data loggers per AP10
- 30 days of local measurement memory
- Approximately 18 months of battery operation for temperature and humidity monitoring
The Vaisala VDL200 is a secure Power-over-Ethernet data logger for monitoring temperature, relative humidity, carbon dioxide and analog or Boolean inputs in controlled and GxP-regulated environments.
Designed for the Vaisala viewLinc Continuous Monitoring System, the VDL200 combines interchangeable smart probes, onboard memory and battery backup to provide reliable, gap-free environmental monitoring.
Vaisala viewLinc provides continuous monitoring, alarming and reporting for temperature, humidity, CO₂, differential pressure and other critical parameters in GxP-regulated and demanding industrial environments.
- Supports FDA 21 CFR Part 11 and EU GMP Annex 11 requirements
- Secure audit trails, access control, alarms and reports
- Ethernet, PoE, Wi-Fi, VaiNet and Modbus connectivity
- Scalable from a few monitoring points to thousands
10 other products in the same category:
Vaisala viewLinc provides continuous monitoring, alarming and reporting for temperature, humidity, CO₂, differential pressure and other critical parameters in GxP-regulated and demanding industrial environments.
- Supports FDA 21 CFR Part 11 and EU GMP Annex 11 requirements
- Secure audit trails, access control, alarms and reports
- Ethernet, PoE, Wi-Fi, VaiNet and Modbus connectivity
- Scalable from a few monitoring points to thousands
The Vaisala DL1700 is a four-channel thermocouple data logger for continuous monitoring and validation work at extreme temperatures.
- Overall application range from −240 to +1760 °C, depending on thermocouple type
- Accepts J, K, T, E, R and S thermocouples
- Four thermocouple inputs plus an internal cold-junction reference
- Works with Vaisala viewLinc for monitoring, alarms and compliant reporting
The Vaisala VDL200 is a secure Power-over-Ethernet data logger for monitoring temperature, relative humidity, carbon dioxide and analog or Boolean inputs in controlled and GxP-regulated environments.
Designed for the Vaisala viewLinc Continuous Monitoring System, the VDL200 combines interchangeable smart probes, onboard memory and battery backup to provide reliable, gap-free environmental monitoring.
The Vaisala CAB100 centralises differential-pressure transmitters, analog inputs and interface components for cleanroom and industrial monitoring with the viewLinc Continuous Monitoring System.
- Preconfigured cabinet for viewLinc monitoring systems
- CAB100A and higher-capacity CAB100B models
- Differential pressure, analog input and hazardous-area options
- IP54 or IP66 enclosure protection, depending on model
The Vaisala RFL100 uses secure, long-range VaiNet wireless technology to monitor temperature, relative humidity and carbon dioxide with the AP10 Access Point and viewLinc Continuous Monitoring System.
- At least 50 m typical indoor wireless range
- Up to 32 RFL100 data loggers per AP10
- 30 days of local measurement memory
- Approximately 18 months of battery operation for temperature and humidity monitoring
The Vaisala DL4000 records current or voltage signals from industrial transmitters and brings pressure, flow, level, pH, moisture, gas concentration and other process measurements into viewLinc.
- Scheduled for future discontinuation; confirm availability before specifying
- Closest current substitute: Vaisala VDL200 with ANP115 analog input probe
- Available with 1, 2 or 4 analog input channels
- Supports 0–20 mA, 0–5 V DC or 0–10 V DC models
- 120,000-sample onboard memory and a 10-year battery
The Vaisala PDT101 and PDT102 provide precise low differential-pressure measurement for cleanrooms, isolation rooms, regulated facilities, data centres and air-handling systems.
- PDT101 accuracy up to 0.40% of span
- PDT102 high accuracy up to 0.25% of span
- 4–20 mA or voltage output configurations
- Compatible with Vaisala viewLinc monitoring solutions
The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.
- Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
- Existing HMT140 installations can continue to be supported
- Migration should be checked against the existing sensor and input type
- Contact Seacom for replacement selection and viewLinc compatibility
Vaisala DL1000, DL1400, DL1016 and DL1416 temperature data loggers provide reliable, traceable monitoring for refrigerators, freezers, cold rooms, incubators and regulated facilities.
- Scheduled for future discontinuation; confirm availability before specifying
- Current replacement platform: Vaisala VDL200 with suitable smart probes
- Two- or four-channel configurations
- External probe range down to −90 °C
- Onboard memory and a typical 10-year battery life
The Vaisala DL2000 combines precision temperature and relative-humidity monitoring with optional analog or door-contact inputs for viewLinc systems.
- Scheduled for future discontinuation; confirm availability before specifying
- Current replacement platform: Vaisala VDL200 with suitable smart probes
- Internal temperature and relative-humidity measurement
- Optional current, voltage or Boolean input configurations
- Onboard memory and a typical 10-year battery life