Home

The Vaisala MGP261 measures methane, carbon dioxide and humidity directly in raw biogas. Its in-situ design avoids a separate sampling system and helps operators monitor gas quality while protecting downstream equipment.

• Measures CH₄, CO₂ and water vapour in one probe
• 0–100 vol-% measurement range for methane and carbon dioxide
• Humidity output as 0–25 vol-% H₂O or −10 to +60 °C dew point
• Heated optics help prevent condensation in wet biogas
• Three isolated 4–20 mA outputs and RS-485 Modbus RTU
• Ex-certified construction for direct installation in hazardous process areas

Ask Seacom about the MGP261

The Sato NSII-BQ Sigma II Barograph records atmospheric-pressure changes on a rotating paper chart for visual review and filing.

• Catalogue number: 7237-00.
• Measuring range: 940–1045 hPa.
• Accuracy: ±1 hPa from 950–1040 hPa; ±2 hPa elsewhere within range.
• 7-day or 32-day recording according to the current manual.
• Powered by two C batteries.
• Includes 55 sheets of 7-day chart paper.

The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.

• Flexible head helps reduce errors caused by poor surface contact.
• Type K and Type E thermocouple options.
• Published configurations rated to 300°C, 500°C or 800°C.
• Select the probe geometry, cable and connector to suit your measurement setup.

The Hyoda M Series provides remote temperature indication through a sensing bulb and capillary tube.

• M3, M4 and M6 models with 75, 100 and 150 mm dials.
• Liquid-filled and gas-filled configurations.
• IP43 standard models and IP65 WP versions.
• Indication-only or pointer-contact configurations.

The Hyoda S6 is a fluid-filled thermometer with a 150 mm dial and remote sensing bulb connected by capillary tube.

• Wall-mounted display for convenient temperature reading.
• S6 with IP43 protection; S6-WP with IP65 protection.
• Liquid-filled and gas-filled configurations.
• Indication-only or optional one or two pointer contacts.
• Optional maximum-temperature pointer.

The Hyoda AY Series provides local temperature indication with a stainless steel exterior and IP65 protection.

• AY4 and AY5 with 100 and 125 mm dials.
• AY4-QS and AY5-QS with adjustable-angle heads.
• Available temperature scales within −50 to 500°C.
• Bimetal indication without a microswitch.
• Stem and connection selected for the installation.

The Hyoda ES-UT is a liquid-filled temperature instrument with a remote sensing bulb and microswitch contacts.

• One or two microswitch contacts.
• Available temperature scales within −70 to 400°C.
• Wall-mounted enclosure with IP65 protection.
• Published explosion-proof designation: d2G4.
• Confirm approval suitability for the installation.

The Hyoda KME-2 and KME-4 provide temperature switching through a remote sensing bulb and one microswitch contact.

• KME-2 includes a temperature indicator.
• KME-4 operates without a temperature indicator.
• Liquid-filled and gas-filled configurations.
• Wall-mounted enclosure with IP43 drip-proof protection.
• Published contact rating: AC 125 V or 250 V / 5 A.

DeltaTrak in-transit temperature loggers and recorders document temperature conditions during shipment.

• 16000 Series: disposable paper chart recorders with model-dependent recording periods from 5 to 90 days.
• FlashLink Mini PDF: single-use electronic logger with USB PDF and CSV reports.
• Choose according to shipment duration, temperature range and the receiving team's record requirements.

The Sato SK-270WP is a waterproof handheld digital thermometer with interchangeable probes for food temperature checks, liquids and quality control.

• −40 to 250°C measuring range with the standard S270WP-01 probe.
• 0.1°C display resolution.
• IP67-rated main unit when connected to a probe.
• HOLD, automatic power-off and temperature/time alarms.
• Penetration, long-stem, immersion and surface probe options.

Measuring range and waterproof protection depend on the probe selected. The S270WP-41 surface probe is not waterproof.

The EDL Steel-Cased Pocket-Probe is a portable digital thermocouple thermometer for production, maintenance and laboratory temperature checks.

• Durable steel housing with a protective cover.
• Selectable °C and °F display with 0.1° resolution.
• Available in separate Type K, J, E and T versions.
• Accepts matching miniature-plug thermocouple probes.
• Optional peak hold, magnetic backing and Lexan display window.

Probes are sold separately. Match the probe’s thermocouple type and temperature range to the selected instrument.

The Watanabe WPMZ Series features a colour LCD for displaying measurements from compatible sensors and equipment.

• WPMZ-1: DC voltage and current.
• WPMZ-3: Strain gauge measurement.
• WPMZ-5: Rotation and speed.
• WPMZ-6: Instantaneous flow and totalised flow.
• Numeric, bar graph and trend display options.
• Selectable power supplies, alarm outputs and communication options.

The Vaisala HMT370EX provides intrinsically safe humidity and temperature measurement with HMP-series probes. The new DMP370 configuration combines the HMT370EX transmitter with a DMP37X DRYCAP® probe for low-dew-point measurement in hazardous locations.

• HMP probes for relative humidity and temperature
• DMP370 dew-point measurement from −70 to +10 °C Td/f
• Two two-wire 4–20 mA outputs
• Certified configurations for hazardous gas and dust areas, up to Zone 0 / 20
• Detachable probes and traceable calibration

DMP370 availability: Vaisala plans first deliveries for Q1 2027. Contact Seacom for configuration and project lead time.

Hyoda fluid-filled thermometers provide temperature indication and optional switching for industrial applications.

• Liquid-filled and gas-filled configurations, depending on model.
• Remote sensing arrangements with a bulb and capillary tube.
• Indication-only, pointer-contact and microswitch options.
• Model-specific dial sizes, mounting arrangements and enclosure protection.

Select the temperature scale, sensing arrangement and contact requirements to suit your installation.

Anritsu AR-6500 series infrared thermometers are capable of non-contact temperature measurement and come with contact type thermometer functions

The Anritsu FL Series uses fiber optic probes to measure temperature in microwave, high-voltage and strong electromagnetic environments where conventional electrical probes may be unsuitable.

• FL-2000: one measurement channel.
• FL-2400: four measurement channels.
• 0.1°C resolution.
• Probe options for chemicals, intense light, high temperatures and semisolid samples.
• Analog output and RS-232C communication.

Probes are ordered separately. The usable temperature range depends on the selected probe.

The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.

• HD-1200 → HR-1200.
• HD-1250 → HR-1250.
• Additional replacements for basic, alarm, LED and memory models.
• Confirm the thermocouple type, probe connector and required functions.

View the Anritsu HR Series replacement range.

The Anritsu CS Series features small sensing heads for contact temperature measurement on stationary surfaces, particularly where space limits the use of larger probes.

• Type K and Type E thermocouple options.
• Head sizes from 3 mm diameter, depending on model.
• −50 to 400°C range for CS-0, CS-1, CS-2 and CS-3 families.
• −50 to 600°C range for the CS-7 family.
• Straight and angled configurations with selectable shaft lengths, cables and connectors.

Select the sensing head and connection to suit the measurement point and thermometer.

The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.

• Type K and Type E thermocouple options.
• Published configurations rated to 210°C, 300°C or 500°C.
• Separate BTN spare needles for compatible replaceable-needle models.
• Select the needle design, cable and connector for your measurement setup.

Dickson round chart recorders provide a visible paper record of temperature or temperature and humidity for routine inspection and filing.

• 3-inch SC3: compact temperature recorder
• 4-inch SL4: temperature recorder with digital display
• 8-inch KT8: temperature recording with sensor and channel options
• 8-inch TH8: temperature and relative humidity recording
• Replacement selection assistance for older KT6, TH6, KT8P, KT856 and TH8P models

Send your existing model number, measurement range and chart reference so we can help identify a suitable configuration.

The Anritsu ACSII Series provides controlled temperature sources for checking and calibrating surface and insertion temperature probes.

• ACSII-1000: surface calibration from 30 to 300°C.
• ACSII-2000: surface calibration from 30 to 500°C.
• ACSII-3000: internal calibration from 30 to 500°C.
• ACSII-4000: surface and internal calibration from 30 to 500°C.
• PID control with automatic tuning and separate control and calibration units.

Select the model according to probe geometry, required temperature points and calibration requirements.

The Sato HIGHEST II combines a dial hygrometer and digital thermometer for convenient local checks of room temperature and humidity.

• Humidity range: 20 to 100% RH.
• Temperature range: 0 to 50°C.
• Human hair humidity sensor and thermistor temperature sensor.
• 2% RH dial graduations and 0.1°C temperature display resolution.
• 135 mm diameter body with wall-mount bracket.
• Powered by one AA battery.

The Sato SK-RHC Series measures temperature and humidity with a local display and output for compatible monitoring equipment.

• Voltage, 4–20 mA or RS-485 versions selected when ordering.
• Plug-in, remote and miniature flexible probe options.
• Relay alarm with an upper or lower threshold for each parameter.
• Selectable 1-second or 10-second refresh interval.
• Probe purchased separately; measurement range and accuracy depend on the probe.

The Sato SK-L400T measures and records temperature from up to four Type K thermocouple probes, with all four readings shown on a large backlit display.

• Four temperature channels for comparing multiple measurement points.
• SD-card recording with intervals from 1 second to 90 minutes.
• Independent high and low alarms for each channel.
• MAX/MIN, relative readings and T1–T2 temperature difference.
• Battery operation with an optional AC adapter.
• Probes sold separately; measuring range depends on the selected probe.

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

The Sato SK-1260 is a handheld digital thermometer with memory and high/low alarms, supporting dedicated thermistor and Type K thermocouple probes.

• Stores up to 180 readings manually or 120 readings automatically.
• High and low temperature alarms.
• MAX/MIN, HOLD and relative-temperature functions.
• IPX4 protection against water splashes.
• Probe options for liquids, food, air and surface measurements.
• Optional printer for stored readings.

Available with the SK-S100K standard probe or as a main unit without a probe. Measuring range depends on the selected probe.

The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.

• S-100, S-200 and S-300: stationary surfaces.
• S-400: very small measurement surfaces.
• S-500 and S-600: moving and rotating surfaces.
• S-770 and S-780: self-supporting designs.
• Type K and Type E configurations with model-specific temperature ratings.

The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.

• Built-in magnets for secure attachment to magnetically receptive surfaces.
• Type K and Type E thermocouple configurations.
• Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
• Different sensing heads and cable options to suit the installation.

The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.

• Type K and Type E thermocouple options.
• Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
• Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
• Different insertion lengths, cables and connectors to suit the measurement task.

The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.

• Six models covering wire diameters from 0.65 mm to 15 mm.
• Type K and Type E thermocouple options.
• Sensing temperature range of −50°C to 250°C.
• Select the cable and connector to suit your measuring instrument.

The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.

• M2, M3, M4 and M5 mounting sizes.
• Type K and Type E thermocouple options.
• Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
• Select the cable length and connector to suit your installation and instrument.

The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.

• Self-supporting designs with or without a standard grip.
• Type K and Type E thermocouple options.
• Different head sizes to suit the available contact area.
• Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.

The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.

• Setting-type and grip-type configurations.
• Standard and heavy-duty versions.
• Flat and curved guard options, depending on the model.
• Type K and Type E thermocouples.
• Temperature range: −50°C to 250°C.

The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.

• U-100 and U-200 head-size families.
• Guard and wheel configurations for different contact conditions.
• Type K and Type E thermocouple options.
• Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
• Select the probe geometry, cable and connector to suit the installation.

The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.

• Type K and Type E thermocouple options.
• Different sensing heads and probe geometries.
• Model-specific upper temperature limits from 200°C to 800°C.
• Cable and connector options to match the measuring instrument.