- Out-of-Stock
MG Series Catalogue
Magnetic Probe MG Series
1.46MB
Anritsu MG Series Magnetic Surface Temperature Probes
The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.
- Built-in magnets for secure attachment to magnetically receptive surfaces.
- Type K and Type E thermocouple configurations.
- Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
- Different sensing heads and cable options to suit the installation.
Anritsu MG Series Magnetic Surface Temperature Probes
The Anritsu MG Series uses built-in magnets to hold the sensing head against a stationary measurement surface. These probes provide a practical way to take surface temperature readings where the target material allows secure magnetic attachment.
Key Features
- Magnetic attachment for stationary surface measurements.
- Type K and Type E thermocouple configurations.
- Selected models rated from −50°C to 250°C or −50°C to 400°C.
- Different head designs and cable configurations to suit the installation.
Compare MG Probe Models
The following are complete example configurations. Confirm the full order code, thermocouple type and connection before ordering.
| Probe | Type K example | Type E example | Temperature range |
|---|---|---|---|
| MG-11 | MG-11K-TS1-ANP | MG-11E-TS1-ANP | −50 to 250°C |
| MG-64 | MG-64K-GW1-ANP | MG-64E-GW1-ANP | −50 to 400°C |
| MG-21 | MG-21K-TS1-ANP | MG-21E-TS1-ANP | −50 to 250°C |
| MG-24 | MG-24K-GW1-ANP | MG-24E-GW1-ANP | −50 to 400°C |
| MG-33 | MG-33K-TA1-ANP | MG-33E-TA1-ANP | −50 to 250°C |
| MG-34 | MG-34K-GX1-ANP | MG-34E-GX1-ANP | −50 to 400°C |
Probe Selection and Dimensions
Model Pictures and Order Codes
Each model below groups its original drawing with the complete Type K and Type E example codes and temperature range.
MG-11 Magnetic Probe
| Specification | MG-11 |
|---|---|
|
|
|
| Type K order code | MG-11K-TS1-ANP |
| Type E order code | MG-11E-TS1-ANP |
| Temperature range | −50 to 250°C |
MG-64 Magnetic Probe
| Specification | MG-64 |
|---|---|
|
|
|
| Type K order code | MG-64K-GW1-ANP |
| Type E order code | MG-64E-GW1-ANP |
| Temperature range | −50 to 400°C |
MG-21 Magnetic Probe
| Specification | MG-21 |
|---|---|
|
|
|
| Type K order code | MG-21K-TS1-ANP |
| Type E order code | MG-21E-TS1-ANP |
| Temperature range | −50 to 250°C |
MG-24 Magnetic Probe
| Specification | MG-24 |
|---|---|
|
|
|
| Type K order code | MG-24K-GW1-ANP |
| Type E order code | MG-24E-GW1-ANP |
| Temperature range | −50 to 400°C |
MG-33 Magnetic Probe
| Specification | MG-33 |
|---|---|
|
|
|
| Type K order code | MG-33K-TA1-ANP |
| Type E order code | MG-33E-TA1-ANP |
| Temperature range | −50 to 250°C |
MG-34 Magnetic Probe
| Specification | MG-34 |
|---|---|
|
|
|
| Type K order code | MG-34K-GX1-ANP |
| Type E order code | MG-34E-GX1-ANP |
| Temperature range | −50 to 400°C |
Measurement Notes
For these examples, Anritsu specifies a tolerance of ±2.5°C at a surface temperature of 100°C and a response time of 2 seconds under its test conditions. These figures are not a guarantee of the same performance on every surface.
The sensing head rating does not establish the permitted temperature of the cable or connector. Keep those components within their respective limits.
Choosing the Right Magnetic Probe
- Target surface: confirm that the material accepts a magnet and that the head can sit securely. Not every metal is suitable for magnetic attachment.
- Contact conditions: check surface shape, coatings, cleanliness and access. Poor contact can affect the reading.
- Temperature: select a head and cable combination suitable for the complete operating conditions.
- Instrument connection: match the thermocouple type and connector to the thermometer or data logger.
- Measurement task: these probes measure the contacted surface; do not assume that reading equals an internal fluid or process temperature.
Additional and Earlier Model References
The existing Seacom page also lists the references below. Some are abbreviated or earlier references. Send the complete label or order code so we can check the appropriate specification and supply options; do not assume an automatic replacement.
| Model / reference | Model / reference |
|---|---|
| MG-11K | MG-12K |
| MG-21K | MG-22K |
| MG-13 | MG-23 |
| MG-22 | MG-62 |
Related Anritsu Temperature Instruments
- Anritsu HR Series handheld thermometers
- Anritsu AM-9000 Series temperature data loggers
- Anritsu S Series surface temperature probes
Instrument links are provided for comparison. Confirm the input type, connector and required measuring range before pairing a probe with an instrument.
Need Help Selecting an MG Probe?
Contact Seacom Process Instruments Sdn Bhd with the target material, surface shape, operating temperature, cable length and thermometer model. For a replacement, include a photograph of the existing probe and its complete model number.
You might also like
The Anritsu AM-9000 Series records temperature from six or twelve thermocouple channels in one portable instrument. Choose a fixed thermocouple-type model or a flexible multi-input model for temperature and DC-voltage measurement.
- Choice of 6-channel or 12-channel instruments
- Fixed thermocouple-type and multi-input versions
- Supports E, K, J, T and R thermocouples according to model
- 120,000 measurement-data memory
- USB 2.0 Micro-B communication for data transfer
- Battery operation or optional AC adaptor
- Optional AMS-950 software for PC analysis
The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.
- Single-channel handheld thermometer with built-in printer
- Manual, interval and sequential-number printing
- Stores up to 100 measurements for batch printing
- AP-400 supports Type E or K with an ASP connector
- AP-450 supports Type E, K, J, T or R with an ANP connector
- Thermocouple type is selected when ordering and is not switchable
- Powered by four AA batteries or an optional AC adaptor
The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.
- HD-1200 → HR-1200.
- HD-1250 → HR-1250.
- Additional replacements for basic, alarm, LED and memory models.
- Confirm the thermocouple type, probe connector and required functions.
16 other products in the same category:
The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.
- Self-supporting designs with or without a standard grip.
- Type K and Type E thermocouple options.
- Different head sizes to suit the available contact area.
- Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.
Anritsu SF Series fine flexible temperature probes use extra-fine thermocouple wire in a Teflon-coated sheath for internal temperature measurement.
- Flexible construction for positioning in restricted spaces
- Type K and Type E configurations
- Published temperature range: −50 to 200°C
- Model references: SF-K-050, SF-K-100, SF-K-150 and SF-K-200
- Confirm the required length and instrument connector when ordering
The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.
- Grip, sleeve and terminal-box configurations.
- Sheath diameters from 0.25 to 8.0 mm.
- Type K and Type E options, depending on configuration.
- SUS316, SUS310S and Inconel sheath options.
- Temperature limits depend on diameter, material and coating.
The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.
- Flexible head helps reduce errors caused by poor surface contact.
- Type K and Type E thermocouple options.
- Published configurations rated to 300°C, 500°C or 800°C.
- Select the probe geometry, cable and connector to suit your measurement setup.
The Anritsu SX Series features a flexible head that helps the sensing element maintain contact with the measurement surface.
- Contact-support head accommodates an angle of up to ±4°.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 300°C or −50 to 800°C, depending on model.
- Select the probe configuration, cable and connector to suit your application and instrument.
The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.
- Published model examples cover −100 to 200°C.
- Type K and Type E thermocouple options.
- Suitable for temperature checks and recording with a compatible instrument.
- Confirm the probe, cable and connector specifications when ordering.
The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.
- Type K and Type E thermocouple options.
- Published configurations rated to 210°C, 300°C or 500°C.
- Separate BTN spare needles for compatible replaceable-needle models.
- Select the needle design, cable and connector for your measurement setup.
The Anritsu UX Series measures the temperature of moving and rotating surfaces. Its flexible head and contact-support mechanism help maintain contact and reduce shaking during measurement.
- Designed for moving and rotating surface measurements.
- Flexible head with contact support.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 200°C or −50 to 250°C, depending on model.
The Anritsu BS Series needle temperature probes measure internal temperature in liquids and semi-solid materials.
- Type K and Type E thermocouple options.
- Probe diameters from 0.9 mm to 5.0 mm, depending on the model.
- Temperature ranges from −200°C up to 200°C, 300°C or 500°C, depending on the model.
- Different insertion lengths, cables and connectors to suit the measurement task.
The Anritsu U Series measures moving and rotating surface temperatures using a low-friction contact design.
- U-100 and U-200 head-size families.
- Guard and wheel configurations for different contact conditions.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to 200°C or 250°C, depending on the configuration.
- Select the probe geometry, cable and connector to suit the installation.
The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.
- Setting-type and grip-type configurations.
- Standard and heavy-duty versions.
- Flat and curved guard options, depending on the model.
- Type K and Type E thermocouples.
- Temperature range: −50°C to 250°C.
Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.
- Measurement range: 0 to 500°C
- CR-31: for tip diameters below 1.5 mm
- CR-32: for tip diameters from 1.5 to 4 mm
- Type K and Type E models
- CRB base options for connection to compatible thermometers
The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.
- Clip-type design for heat-pipe surface measurement.
- Published configurations cover −50 to 300°C.
- Type K and Type E thermocouple options.
- VA-03, VA-04, VA-05 and VA-06 model options.
The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.
- Type K thermocouple probes.
- HHT-4 configuration examples: −50 to 800°C.
- HHT-5 configuration examples: 300 to 1100°C.
- Different probe configurations to suit access to the measurement point.
The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.
- S-100, S-200 and S-300: stationary surfaces.
- S-400: very small measurement surfaces.
- S-500 and S-600: moving and rotating surfaces.
- S-770 and S-780: self-supporting designs.
- Type K and Type E configurations with model-specific temperature ratings.
The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.
- Six models covering wire diameters from 0.65 mm to 15 mm.
- Type K and Type E thermocouple options.
- Sensing temperature range of −50°C to 250°C.
- Select the cable and connector to suit your measuring instrument.