- Out-of-Stock
SC Series Catalogue
Screw Setting Probes SC Series
695.2KB
Anritsu SC Series Screw-Mounted Surface Temperature Probes
The Anritsu SC Series measures stationary surface temperature using a sensing element secured to the target with a screw.
- M2, M3, M4 and M5 mounting sizes.
- Type K and Type E thermocouple options.
- Temperature ratings from −50°C to 150°C, 200°C, 300°C or 400°C, depending on the model.
- Select the cable length and connector to suit your installation and instrument.
Anritsu SC Series Screw-Mounted Surface Temperature Probes
The Anritsu SC Series attaches to a stationary measurement surface using a screw. Select the mounting size and temperature rating to suit the installation, then match the thermocouple and connection to your instrument.
Key Features
- Screw attachment for stationary surface measurements.
- M2, M3, M4 and M5 mounting sizes.
- Type K and Type E thermocouple options.
- Model-dependent upper temperature limits of 150°C, 200°C, 300°C or 400°C.
Compare SC Probe Models
| Model | Screw size | Temperature range | Cable code |
|---|---|---|---|
| SC-21 | M2 | −50 to 200°C | TA |
| SC-22 | M2 | −50 to 300°C | GW |
| SC-31 | M3 | −50 to 150°C | TS |
| SC-32 | M3 | −50 to 400°C | SG |
| SC-41 | M4 | −50 to 150°C | TS |
| SC-42 | M4 | −50 to 400°C | SG |
| SC-51 | M5 | −50 to 150°C | TS |
| SC-52 | M5 | −50 to 400°C | SG |
Probe Selection and Dimensions
Model Details and Order Codes
The configurations below use a 1 m cable and an ANP miniature plug. Confirm the required cable length, thermocouple type and instrument connector before ordering.
M2 Mounting — SC-21 and SC-22
| Specification | SC-21 | SC-22 |
|---|---|---|
| Screw size | M2 | M2 |
| Type K example | SC-21K-TA1-ANP | SC-22K-GW1-ANP |
| Type E example | SC-21E-TA1-ANP | SC-22E-GW1-ANP |
| Temperature range | −50 to 200°C | −50 to 300°C |
M3 Mounting — SC-31 and SC-32
| Specification | SC-31 | SC-32 |
|---|---|---|
| Screw size | M3 | M3 |
| Type K example | SC-31K-TS1-ANP | SC-32K-SG1-ANP |
| Type E example | SC-31E-TS1-ANP | SC-32E-SG1-ANP |
| Temperature range | −50 to 150°C | −50 to 400°C |
M4 Mounting — SC-41 and SC-42
| Specification | SC-41 | SC-42 |
|---|---|---|
| Screw size | M4 | M4 |
| Type K example | SC-41K-TS1-ANP | SC-42K-SG1-ANP |
| Type E example | SC-41E-TS1-ANP | SC-42E-SG1-ANP |
| Temperature range | −50 to 150°C | −50 to 400°C |
M5 Mounting — SC-51 and SC-52
| Specification | SC-51 | SC-52 |
|---|---|---|
| Screw size | M5 | M5 |
| Type K example | SC-51K-TS1-ANP | SC-52K-SG1-ANP |
| Type E example | SC-51E-TS1-ANP | SC-52E-SG1-ANP |
| Temperature range | −50 to 150°C | −50 to 400°C |
Cable Options
| Code | Construction | Applicable models |
|---|---|---|
| TA | Fluororesin-insulated thermocouple | SC-21 |
| GW | Glass fibre | SC-22 |
| TS | Silicone rubber | SC-31, SC-41, SC-51 |
| SG | Glass fibre with stainless steel | SC-32, SC-42, SC-52 |
Measurement Notes
- Tolerance: ±3°C at 100°C for the manufacturer’s example configurations. Tolerance changes with temperature; do not apply this figure across every operating condition.
- Response: the specified 5 seconds is a 99% response test in boiling water or vapour. Response after installation on a surface can differ.
- Temperature limits: the sensing section, cable and connector must each remain within their permitted conditions.
- Construction: the screw-setting part is stainless steel. Anritsu lists SC probes as non-repairable and does not give a standard durability period for this special application.
Choosing the Right Screw-Mounted Probe
- Mounting point: check the screw size, available contact area and clearance for the cable exit.
- Surface contact: review the surface finish and how the sensing section will seat against the target. The mounting arrangement affects heat transfer.
- Operating conditions: provide the normal temperature, expected peaks, vibration and any exposure to liquids or cleaning agents.
- Cable route: identify the required reach and support the cable so it does not pull on the sensing point.
- Instrument: confirm the thermometer or data logger’s thermocouple input and plug type.
Existing Seacom Order References
These references are retained from the previous listing. The final *** is a placeholder; confirm the required termination to complete the order code.
| Model / reference | Model / reference |
|---|---|
| SC-31K-TS1-*** | SC-32K-SG1-*** |
| SC-41K-TS1-*** | SC-42K-SG1-*** |
| SC-51K-TS1-*** | SC-52K-SG1-*** |
Related Anritsu Instruments and Probes
- Anritsu HR Series handheld thermometers
- Anritsu AM-9000 Series temperature data loggers
- Anritsu MG Series magnetic surface probes
- Anritsu ST and STN flat leaf probes
Confirm the complete probe and instrument combination before ordering.
Need Help Selecting an SC Probe?
Contact Seacom Process Instruments Sdn Bhd with the screw size, target material, temperature range, cable length and instrument model. Include a photograph or drawing of the mounting point, or the complete reference of the probe you are replacing.
You might also like
The Anritsu AM-9000 Series records temperature from six or twelve thermocouple channels in one portable instrument. Choose a fixed thermocouple-type model or a flexible multi-input model for temperature and DC-voltage measurement.
- Choice of 6-channel or 12-channel instruments
- Fixed thermocouple-type and multi-input versions
- Supports E, K, J, T and R thermocouples according to model
- 120,000 measurement-data memory
- USB 2.0 Micro-B communication for data transfer
- Battery operation or optional AC adaptor
- Optional AMS-950 software for PC analysis
The Anritsu AP-400 Series combines a high-accuracy thermocouple thermometer with a built-in thermal printer. Measurements can be printed immediately, printed automatically at selected intervals or stored and printed later.
- Single-channel handheld thermometer with built-in printer
- Manual, interval and sequential-number printing
- Stores up to 100 measurements for batch printing
- AP-400 supports Type E or K with an ASP connector
- AP-450 supports Type E, K, J, T or R with an ANP connector
- Thermocouple type is selected when ordering and is not switchable
- Powered by four AA batteries or an optional AC adaptor
The Anritsu HD Series is discontinued. The HR Series provides replacements for the main HD handheld thermometer models.
- HD-1200 → HR-1200.
- HD-1250 → HR-1250.
- Additional replacements for basic, alarm, LED and memory models.
- Confirm the thermocouple type, probe connector and required functions.
16 other products in the same category:
The Anritsu A Series measures stationary surface temperatures through direct contact. Choose the probe configuration to suit the measurement location and operating temperature.
- Type K and Type E thermocouple options.
- Different sensing heads and probe geometries.
- Model-specific upper temperature limits from 200°C to 800°C.
- Cable and connector options to match the measuring instrument.
The Anritsu VA Series uses a clip-type sensing arrangement to measure heat-pipe surface temperature. Select the probe to suit the pipe dimensions and connected instrument.
- Clip-type design for heat-pipe surface measurement.
- Published configurations cover −50 to 300°C.
- Type K and Type E thermocouple options.
- VA-03, VA-04, VA-05 and VA-06 model options.
The Anritsu BC Series measures internal temperature in food, liquids and semi-solid materials. Its needle design reaches the measurement point inside the sample.
- Designed for food core-temperature measurement.
- IPX5 construction allows washing under running water.
- Type K and Type E thermocouple options.
- Choice of probe diameter, length, protective-pipe coating and connector.
The Anritsu UX Series measures the temperature of moving and rotating surfaces. Its flexible head and contact-support mechanism help maintain contact and reduce shaking during measurement.
- Designed for moving and rotating surface measurements.
- Flexible head with contact support.
- Type K and Type E thermocouple options.
- Published configurations cover −50 to 200°C or −50 to 250°C, depending on model.
Anritsu CR Series temperature probes measure soldering-iron tip temperatures. Select the probe according to the tip diameter and your instrument’s thermocouple input.
- Measurement range: 0 to 500°C
- CR-31: for tip diameters below 1.5 mm
- CR-32: for tip diameters from 1.5 to 4 mm
- Type K and Type E models
- CRB base options for connection to compatible thermometers
The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.
- S-100, S-200 and S-300: stationary surfaces.
- S-400: very small measurement surfaces.
- S-500 and S-600: moving and rotating surfaces.
- S-770 and S-780: self-supporting designs.
- Type K and Type E configurations with model-specific temperature ratings.
The Anritsu SHEATH Series offers bendable sheathed thermocouple probes for measuring temperatures in liquids, air and gases.
- Grip, sleeve and terminal-box configurations.
- Sheath diameters from 0.25 to 8.0 mm.
- Type K and Type E options, depending on configuration.
- SUS316, SUS310S and Inconel sheath options.
- Temperature limits depend on diameter, material and coating.
The Anritsu SH Series measures moving or rotating surface temperatures, with a small-head design suited to smaller measurement targets.
- Setting-type and grip-type configurations.
- Standard and heavy-duty versions.
- Flat and curved guard options, depending on the model.
- Type K and Type E thermocouples.
- Temperature range: −50°C to 250°C.
The Anritsu HHT Series is designed for contact measurement of high-temperature surfaces. Select the probe configuration to match your operating temperature, measurement position and thermometer.
- Type K thermocouple probes.
- HHT-4 configuration examples: −50 to 800°C.
- HHT-5 configuration examples: 300 to 1100°C.
- Different probe configurations to suit access to the measurement point.
The Anritsu AT Series measures air temperature with a choice of sensing heads, probe lengths and handle configurations.
- AT-10, AT-20, AT-30 and AT-40 models.
- Type K and Type E thermocouple options.
- Temperature ranges from −50°C to model-specific limits of 200°C, 300°C or 500°C.
- Grip and no-grip options for AT-30 and AT-40.
- Match the probe connection to your thermometer or data logger.
The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.
- Built-in magnets for secure attachment to magnetically receptive surfaces.
- Type K and Type E thermocouple configurations.
- Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
- Different sensing heads and cable options to suit the installation.
The Anritsu AX Series measures stationary surface temperature using a flexible head with contact support. This helps the sensing element maintain contact with the target.
- Flexible head helps reduce errors caused by poor surface contact.
- Type K and Type E thermocouple options.
- Published configurations rated to 300°C, 500°C or 800°C.
- Select the probe geometry, cable and connector to suit your measurement setup.
The Anritsu MW Series measures the surface temperature of moving wires, with roller sizes selected to match the wire diameter.
- Six models covering wire diameters from 0.65 mm to 15 mm.
- Type K and Type E thermocouple options.
- Sensing temperature range of −50°C to 250°C.
- Select the cable and connector to suit your measuring instrument.
Anritsu ST and STN flat leaf temperature probes feature thin, flexible sensing tapes for attachment to measurement surfaces.
- ST probe assemblies and STN replaceable sensing tapes
- Type K and Type E options, depending on configuration
- Selected versions rated up to 400°C; limits vary by model
- Choice of tape configurations, lengths and instrument connections
- Selection assistance for complete probes and replacement tapes
The Anritsu BT Series measures internal temperature by inserting a needle tip into semi-solid materials. Choose a fixed-needle or replaceable-needle configuration to suit your application.
- Type K and Type E thermocouple options.
- Published configurations rated to 210°C, 300°C or 500°C.
- Separate BTN spare needles for compatible replaceable-needle models.
- Select the needle design, cable and connector for your measurement setup.
The Anritsu BR Series measures temperature inside freezers, refrigerators, incubators and drying ovens. Select the probe configuration to suit your measurement location and compatible instrument.
- Published model examples cover −100 to 200°C.
- Type K and Type E thermocouple options.
- Suitable for temperature checks and recording with a compatible instrument.
- Confirm the probe, cable and connector specifications when ordering.