Digital Humidity Module
The Vaisala HUMICAP® Digital Humidity Module HMM105 is an open frame module for integration into environmental chambers. The modules provide an I2C output
for relative humidity (RH) or dew point (Td). The module consists of a detachable probe assembly – a probe head with M10x1 threads and a flex cable – and the module circuit board. The probe assembly is 30 cm in length. The module incorporates the Vaisala HUMICAP® 180R sensor which ensures excellent measurement accuracy.
Reliable for OEM’s
The Vaisala HMM105 probe head works in freezing conditions (-40 °C) and also in temperatures up to +180 °C in continuous use. In shorterm use, the probe head can be exposed to temperatures up to +200 °C. The Vaisala HMM105 is intended for OEM chamber manufacturers for integration into test chambers and incubators.
Compared to psychrometers, the Vaisala HMM105 is practically maintenance free. There is no wick that needs changing and there is no need for a water tank or water pump. Thus, environmental stress screening can be done reliably.
I2C interface for better usability
The HMM105 has an I2C interface for communicating with the incubator’s controller. The HMM105 implements I2C slave functionality, with the incubator’s controller acting as the master. The interface can be used to read measurement values and status information, set operation parameters, and make adjustments.
|Model||Vaisala HMM105 Digital Humidity Module|
|Fixed / Portable||Fixed|
|Measurement Range||-20 … +100 °C (-4 … +212 °F)T|
|Remarks||▪ Digital I2C communication interface available|
▪ Full temperature compensation over the operating temperature range of -40 °C …+180 °C
▪ High temperature tolerance, suitable for heat sterilization up to +200 °C
▪ Excellent measurement accuracy with Vaisala HUMICAP® 180R sensor
▪ Detachable probe assembly for easy installation
▪ Probe head with M10x1 threads
▪ 2-point NIST traceable calibration (certificate included)
▪ Applications: test chambers, incubators
12 other products in the same category:
Vaisala's HMT360 humidity and temperature transmitter is designed for use in potentially explosive atmospheres. The electronics are designed so that the transmitter is intrinsically safe. The whole transmitter can be installed directly into an explosive area, even into areas classified as having a constant risk of explosion (Zone 0). HMT360 fulfils all requirements of current standards. The microprocessor-based HMT360 is easy to install, maintain and calibrate due to its modular structure. The interchangeable probes are easy to remove and enable on-site calibration. They make the HMT360 series versatile and ensure its suitability for almost any application.
Also suitable for measuring water activity of Jet Fuel
Vaisala HMT330 series are easy-to-use transmitters for demanding industrial and air conditioning applications. The transmitters measure relative humidity and temperature and from these calculate dew point and wet bulb temperature, mixing ratio and absolute humidity. They can be configured to the customer's requirements on the production line, but configuration and parameters can also be set by the user. The series has both analogue and serial outputs as well as several options: different cable lengths, power supply modules and serial interface modules as well as a local display.
The Vaisala HM40 is a compact, robust and affordable hand-held meter for various portable measurement applications. It is an ideal spot-checking tool that is easy to use and provides reliable measurement. The HM40 hand-held utilizes the interchangeable HMP110 probe that was launched earlier this year and is equipped with the latest humidity sensor technology, the HUMICAP® 180R.
Model available: HM41, HM42, HM45, HM46
Sekonic ST-50M is microprocessor based thermohygrograph. Apart from measuring and recording temperature and relative humidity, it also has large LCD display and alarm output. Remote application is applicable with its electronic remote sensor. ST-50M comes with extra memory slot for digital recording and time printing on chart.
The current loop-powered, two-wire transmitter is called the Vaisala HMT120 and the three-wire transmitter - with voltage and serial line outputs as well as a relay - is called the Vaisala HMT130. The new transmitters utilize the fully interchangeable HMP110 probe.
The transmitters replace with enhanced features the currently very successful HMT100 transmitters. The HMT120 and HMT130 transmitters are especially designed for cleanroom continuous monitoring systems and are very easy to clean. The housing is also durable for continuous exposure of cleanroom cleaning agents and the interchangeable measurement probe is equipped with the latest humidity sensor technology, the HUMICAP180R.
All Dickson chart recorders feature a large 8″ or 6" chart and user-selectable recording timeframes (1-day, 1-week, 1-month) and ranges.
Choose from the following features:
- Replaceable Sensor
- Audible Alarms
- K-Thermocouple Probe
- Battery Operation
Vaisala HPP270 series is designed for demanding hydrogen peroxide bio-decontamination where repeatable, stable, and accurate measurement is essential.
The Vaisala HPP270 probe is suitable for a variety of applications such as isolator, material transfer hatch and room biodecontamination.
The Vaisala 2000 recorder combines internal temperature and RH sensors with an optional external channel for either current or voltage inputs for recording parameters such as differential pressure, CO2, level, particles, or conductivity. The Vaisala 2000 recorder can include a Boolean channel for door switches or alarm contacts.