- Out-of-Stock
Whisper Catalogue
Ultrasonic Leak Detector
7.38MB
Inficon Whisper Ultrasonic Leak Detector
The INFICON Whisper ultrasonic leak detector helps locate leaks by detecting ultrasonic sound. Its portable design supports troubleshooting and routine maintenance.
- Locate leaks in compressed air and vacuum systems
- Listen through headphones to help pinpoint the source
- Adjust sensitivity to suit the inspection
- Accessory options for machinery and enclosure checks
INFICON Whisper Ultrasonic Leak Detector
The INFICON Whisper detects ultrasonic sound produced by leaks and certain mechanical faults. It helps maintenance teams investigate suspected leak locations in compressed air, pneumatic and vacuum systems.
How Ultrasonic Leak Detection Works
Gas moving through a small opening under a pressure difference can generate ultrasound. Whisper converts detected ultrasound into audible sound through headphones, helping the operator trace its source.
This method detects sound rather than identifying the gas. Results depend on the leak conditions, access and competing ultrasonic sources.
Typical Inspection Tasks
- Compressed air: investigate suspected leaks around connections and fittings.
- Vacuum systems: trace air entering through leaking points.
- Machinery: use the optional contact probe for checks on bearings and other components.
- Enclosure seals: use the optional Whisper Transmitter to investigate sound escaping through gaps.
Selecting Your Instrument and Accessories
Confirm the package contents when requesting a quotation. The contact probe and Whisper Transmitter are accessory options; they should not be assumed to be included with every instrument.
For selection assistance, tell us:
- Which system you need to inspect
- Whether it operates under pressure or vacuum
- Where the suspected leaks are located
- Whether you also need machinery or enclosure checks
Enquire About the INFICON Whisper
Contact Seacom Process Instruments to discuss your application, package requirements and current availability.
16 other products in the same category:
FUJIFILM Prescale reveals contact pressure and pressure distribution through changes in red colour density. Place the film between contacting surfaces to identify uneven loading and compare contact patterns.
- Nine standard grades covering 0.006 to 300 MPa
- Two-sheet and mono-sheet types, depending on the grade
- For pressure checks on rollers, flanges, gaskets, presses and contact surfaces
- Choose the grade according to pressure, temperature and humidity conditions
Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!
Sato SK-170GT WBGT Heat Stress Monitor is a portable all-in-one instrument for assessing heat stress in indoor and outdoor working environments.
It measures and displays the WBGT index, ambient temperature, globe temperature and relative humidity. Its built-in black globe detects radiant heat from direct sunlight, hot machinery and surrounding surfaces.
- WBGT, temperature, globe temperature and humidity measurement
- Selectable indoor and outdoor WBGT modes
- Conforms to JIS B 7922 Class 2 based on ISO 7243
- Adjustable WBGT alarm with approximately 75 dB buzzer
- MAX/MIN, display hold and automatic power-off
- Wind-speed compensation setting
- Optional RS-232C connection for real-time PC monitoring
- Tripod mounting hole and carrying case included
The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.
- Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
- Existing HMT140 installations can continue to be supported
- Migration should be checked against the existing sensor and input type
- Contact Seacom for replacement selection and viewLinc compatibility
The Sato SK-650PH is a desktop digital pH meter with a sensor arm for convenient sample measurement.
- Automatic temperature compensation with a suitable sensor.
- One- to three-point calibration.
- Memory for up to 99 records.
- Sensor sensitivity and reading-stability indicators.
- RS-232C data transfer using an optional cable.
Probe and calibration solutions are sold separately. Measuring range and accuracy depend on the selected probe.
The Watanabe WPMZ Series features a colour LCD for displaying measurements from compatible sensors and equipment.
- WPMZ-1: DC voltage and current.
- WPMZ-3: Strain gauge measurement.
- WPMZ-5: Rotation and speed.
- WPMZ-6: Instantaneous flow and totalised flow.
- Numeric, bar graph and trend display options.
- Selectable power supplies, alarm outputs and communication options.
The Watanabe WSPF Series offers compact plug-in signal converters for measurement and control applications.
- Signal isolators and high-speed isolators.
- Transmitter loop supplies and temperature converters.
- RTD and potentiometer converter options.
- Single-output and two-output models.
- Front zero/span adjustment with ±10% adjustment range.
Monitor liquid concentration directly in your process with ATAGO inline refractometers. Models are available for Brix measurement, glycol concentration and other liquid applications requiring a suitable concentration scale.
- CM-800α: compact inline Brix monitor.
- PRM-100α DX: wider Brix range, higher Brix accuracy and user-defined concentration scales.
- CM-800α-PG / EG: dedicated models for propylene glycol or ethylene glycol solutions.
- Discuss your liquid, concentration range and installation requirements with Seacom Malaysia.
The Watanabe TW-2X converts one DC voltage or current input into two proportional DC outputs for measurement and control systems.
- Two outputs for connecting compatible receiving instruments.
- 24 V DC power supply.
- Accuracy: ±0.1% of full scale.
- Response time: 50 ms, from 0 to 90%.
- Compact construction with integrated wiring terminals.
The Tokico MBA Series is an electrical signal-operated emergency shut-off valve using a CO₂ cartridge to power the cylinder actuator and close a ball valve.
- Catalogue connection sizes from 25 to 400 mm.
- CO₂-powered actuation without a plant compressed-air supply.
- Electrical triggering through suitable control equipment.
- Manual reset and horizontal or vertical piping installation.
Contact Seacom to confirm fluid compatibility, pressure, flange specification and control requirements.
The Vaisala CAB100 centralises differential-pressure transmitters, analog inputs and interface components for cleanroom and industrial monitoring with the viewLinc Continuous Monitoring System.
- Preconfigured cabinet for viewLinc monitoring systems
- CAB100A and higher-capacity CAB100B models
- Differential pressure, analog input and hazardous-area options
- IP54 or IP66 enclosure protection, depending on model
The Sekonic SPECTROMASTER C-7000 is a portable spectrometer for evaluating LED, fluorescent, HMI, tungsten, natural and flash light in industrial, laboratory and quality-control applications.
- Spectral measurement from 380 to 780 nm
- Ambient illuminance from 1 to 200,000 lx
- Correlated colour temperature from 1,563 to 100,000 K
- CRI, TM-30-18, SSI, TLCI and TLMF evaluation
- PPFD measurement for horticultural and plant-lighting applications
- Stores up to 999 measurements with CSV spectral-data export
The Sekonic SP-100 is a portable universal 6-channel chart recorder for temperature and process signals.
- Thermocouple, Pt100, DC voltage and 4–20 mA inputs.
- Colour chart recording with configurable ranges and scaling.
- Selectable chart speeds and recording formats.
- Optional memory-card recording.
Discontinued model. Contact Seacom for availability, pricing and configuration details.
Sato handheld refractometers for checking Brix or salt concentration in compatible liquid samples.
- Seven Brix models covering different concentration ranges.
- SK-200R for salt concentration from 0 to 28%.
- Automatic temperature compensation between 10 and 30°C.
- Portable design with an easy-to-read optical scale.
The Vaisala DL4000 records current or voltage signals from industrial transmitters and brings pressure, flow, level, pH, moisture, gas concentration and other process measurements into viewLinc.
- Scheduled for future discontinuation; confirm availability before specifying
- Closest current substitute: Vaisala VDL200 with ANP115 analog input probe
- Available with 1, 2 or 4 analog input channels
- Supports 0–20 mA, 0–5 V DC or 0–10 V DC models
- 120,000-sample onboard memory and a 10-year battery
The Watanabe TZ-1XA and TZ-5XA convert DC voltage or current inputs into proportional, isolated DC outputs for measurement and control systems.
- TZ-1XA: 100–240 V AC power supply.
- TZ-5XA: 24 V DC power supply.
- Accuracy: ±0.1% of full scale.
- Zero and span adjustment: ±5% of full scale.
- Compact construction with integrated wiring terminals.