Cart
Custom content

This is custom content

  • Out-of-Stock
    Watanabe DC V/A to DC V/A Isolated Transducer TZ-1XA TZ-5XA

Watanabe TZ-1XA & TZ-5XA DC Signal Isolators

The Watanabe TZ-1XA and TZ-5XA convert DC voltage or current inputs into proportional, isolated DC outputs for measurement and control systems.

  • TZ-1XA: 100–240 V AC power supply.
  • TZ-5XA: 24 V DC power supply.
  • Accuracy: ±0.1% of full scale.
  • Zero and span adjustment: ±5% of full scale.
  • Compact construction with integrated wiring terminals.

Need advice or a quotation?

Ask Seacom about specifications, availability and the right instrument for your application.

Watanabe TZ-1XA and TZ-5XA DC Signal Isolators

The Watanabe TZ-1XA and TZ-5XA convert a DC voltage or current input into a proportional, isolated DC voltage or current output. Their integrated terminal-block construction provides a compact interface between measurement signals and receiving instruments.

Choose the model according to the available power supply, then specify the required input and output ranges for your application.

Key Features

  • DC voltage or current input and output configurations.
  • AC-powered TZ-1XA and DC-powered TZ-5XA models.
  • Accuracy of ±0.1% of full scale.
  • Zero and span adjustment of ±5% of full scale.
  • Compact body with integrated wiring terminals.

Compare TZ-1XA and TZ-5XA

SpecificationTZ-1XATZ-5XA
Power supply 100–240 V AC 24 V DC
Input DC voltage or current DC voltage or current
Output DC voltage or current DC voltage or current
Accuracy ±0.1% FS ±0.1% FS
Response time, 0–90% 1 ms or 50 ms, depending on specification 1 ms or 50 ms, depending on specification
Zero/span adjustment ±5% FS ±5% FS
Dielectric strength 2000 V AC 1500 V AC
Dimensions, H × W × D 98 × 25 × 41 mm 98 × 25 × 41 mm
Weight Approximately 80 g Approximately 80 g
Operating temperature −5 to +50°C −5 to +50°C

FS means full scale. Confirm the complete ordering specification before selection; the model family name alone does not identify the input span, output span or response option.

TZ-1XA Specification and Ordering Information

Use the original reference below to check the AC-powered model’s signal options, dimensions and connections.

Watanabe TZ-1XA AC-powered DC signal isolator specifications and ordering information

TZ-5XA Specification and Ordering Information

Use the original reference below to check the DC-powered model’s signal options, dimensions and connections.

Watanabe TZ-5XA DC-powered DC signal isolator specifications and ordering information

Selecting the Right Configuration

  • Input: provide the signal type, minimum and maximum values, and details of the source instrument.
  • Output: specify what the receiving PLC, indicator, recorder or controller requires.
  • Power: confirm whether AC power or a 24 V DC supply is available.
  • Load: check the receiving equipment’s input impedance and the selected output’s load limits.
  • Response: identify how quickly the signal must follow changes in the process.
  • Replacement: send the full existing model code and a photograph of the terminal markings.

Need Help Selecting a DC Signal Isolator?

Contact Seacom with your input signal, required output, power supply and connected equipment. We can help check the configuration for your measurement or control application.

16 other products in the same category:

Dry Well Calibrator Practi-Cal
  • Out-of-Stock

The EDL Practi-Cal Series provides dry-well and surface testing facilities for compatible temperature probes.

  • PRI-1: Ambient to 350°C, aluminium block.
  • PRI-2: Ambient to 650°C, brass block.
  • Interchangeable wells and custom insert options.
  • Provision for an independent reference probe.
  • 0.1°C controller resolution.
  • RS-232 interface and iTools software.
Vaisala Handheld CO₂ Meter GM70
  • Out-of-Stock

The Vaisala GM70 was a portable carbon-dioxide meter for diffusion measurements, pump sampling, data logging and field checking fixed CO₂ instruments.

  • Discontinued product; not recommended for new purchases
  • GMP221 probes for percentage-level CO₂ up to 20%
  • GMP222 probes for ppm-level CO₂ up to 10,000 ppm
  • GMH70 diffusion handle or GM70PUMP sampling system
  • MI70 indicator with numerical, graphical and logging functions
  • Used for field checking compatible fixed Vaisala CO₂ instruments
  • Use Vaisala Indigo80 for new portable measurement systems
Sato SK-L200TH II Discontinued | SK-L754 Replacement | Seacom
  • Out-of-Stock

The Sato SK-L200TH II temperature and humidity data logger is discontinued. The replacement is the Sato SK-L754, selected with a compatible temperature and humidity probe.

  • Electronic temperature and humidity recording.
  • 16,000 stored readings per channel.
  • USB communication and microSD data transfer.
  • Choice of plug-in or cabled probe, purchased separately.

View the Sato SK-L754 replacement and probe options.

Vaisala Indigo510 Indigo520 Malaysia
  • Out-of-Stock

The Vaisala Indigo500 Series provides flagship industrial measurement integration: choose Indigo510 for a simplified single-probe system or Indigo520 for full dual-probe capability.

  • Indigo510: one probe and two isolated analog outputs
  • Indigo520: two probes, four isolated outputs and two relays
  • Ethernet web interface and Modbus TCP communication
  • Rugged IP66 and NEMA 4 metal enclosure
Vaisala PDT101 PDT102 Pressure Transmitter | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala PDT101 and PDT102 provide precise low differential-pressure measurement for cleanrooms, isolation rooms, regulated facilities, data centres and air-handling systems.

  • PDT101 accuracy up to 0.40% of span
  • PDT102 high accuracy up to 0.25% of span
  • 4–20 mA or voltage output configurations
  • Compatible with Vaisala viewLinc monitoring solutions
Hyoda (Japan) Explosion Proof Thermometer with MicroSwitch ES-UT
  • Out-of-Stock

The Hyoda ES-UT is a liquid-filled temperature instrument with a remote sensing bulb and microswitch contacts.

  • One or two microswitch contacts.
  • Available temperature scales within −70 to 400°C.
  • Wall-mounted enclosure with IP65 protection.
  • Published explosion-proof designation: d2G4.
  • Confirm approval suitability for the installation.
SPI Positive Displacement Flowmeter MG Series
  • Out-of-Stock

The SPI MG Series oval gear flowmeter measures liquid volume using positive displacement technology. Pulse signals can be connected to a compatible indicator, PLC or batch controller.

  • Direct volumetric measurement of compatible clean liquids
  • Measurement principle does not depend on liquid conductivity
  • Pulse output for remote counting and control applications
  • Display and controller options to suit the installation
  • Batch measurement when paired with a suitable control system
Incubator CO₂ Probe GMP231
  • Out-of-Stock

The Vaisala GMP231 is an OEM carbon-dioxide probe designed for accurate measurement and permanent wall installation in life-science incubators.

  • CO₂ measurement range from 0 to 20%
  • Measurement performance optimized around 5% CO₂
  • Sensor head withstands heat sterilisation at +180 °C
  • At least 120 specified +180 °C sterilisation cycles
  • Internal temperature and pressure measurement for compensation
  • Heated sensor head helps prevent condensation
  • I²C, Vaisala RS-485 protocol and scalable 0–20 mA options
  • Four-point traceable CO₂ calibration certificate included
Vaisala HM40 Humidity Meter | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The compact Vaisala HM40 Series provides reliable humidity and temperature spot checks for HVAC, construction, warehouses, laboratories, museums and industrial applications.

  • Humidity accuracy up to ±1.5% RH
  • HM41, HM42, HM45 and HM46 probe configurations
  • Numeric, statistical and graphical trend displays
  • Traceable calibration certificate included
Kofloc Mass Flow Meter & Controller Malaysia | Seacom
  • Out-of-Stock

Kofloc precision mass flow meters and controllers measure or regulate gas mass flow with minimal influence from changes in operating temperature and pressure.

The range includes digital, compact, standard, high-grade and metal-sealed models for laboratory equipment, gas analysis, semiconductor processes, fuel cells, biotechnology, combustion control and industrial systems.

  • Mass flow measurement and closed-loop gas flow control
  • Digital, analogue and RS485-compatible model options
  • Models with local displays and selectable gas settings
  • Standard and metal-sealed construction options
  • Suitable for equipment integration and process applications

Available series: EX-700R, EX-250S, EX-550, 8700, 3660, 3760, 3200, 3100, 5100 and 5410.

Anritsu MG Magnet Probe
  • Out-of-Stock

The Anritsu MG Series magnetic temperature probes attach to suitable stationary surfaces for surface temperature measurement.

  • Built-in magnets for secure attachment to magnetically receptive surfaces.
  • Type K and Type E thermocouple configurations.
  • Temperature ranges from −50°C to 250°C or 400°C, depending on the model.
  • Different sensing heads and cable options to suit the installation.
DeltaTrak In-Transit Temperature Loggers and Recorders
  • Out-of-Stock

DeltaTrak in-transit temperature loggers and recorders document temperature conditions during shipment.

  • 16000 Series: disposable paper chart recorders with model-dependent recording periods from 5 to 90 days.
  • FlashLink Mini PDF: single-use electronic logger with USB PDF and CSV reports.
  • Choose according to shipment duration, temperature range and the receiving team's record requirements.
Anritsu S Series Surface Temperature Probes | Seacom
  • Out-of-Stock

The Anritsu S Series includes surface temperature probes for different measurement tasks. Select the family according to the contact area, surface movement and probe support required.

  • S-100, S-200 and S-300: stationary surfaces.
  • S-400: very small measurement surfaces.
  • S-500 and S-600: moving and rotating surfaces.
  • S-770 and S-780: self-supporting designs.
  • Type K and Type E configurations with model-specific temperature ratings.
Vaisala DPT145 SF6 Transmitter | Discontinued
  • Out-of-Stock

The Vaisala DPT145 provides online dew-point, pressure and temperature measurement for SF6-insulated electrical equipment. The model is being discontinued and should not be specified for new projects.

  • Measures dew point, pressure and temperature
  • Calculates SF6 density, normalised pressure and moisture in ppm
  • RS-485 communication with Modbus RTU
  • Contact Seacom for availability and replacement assessment
Anritsu WE Series Self-Supporting Surface Temperature Probes
  • Out-of-Stock

The Anritsu WE Series measures stationary surface temperature by resting the probe on the measurement target.

  • Self-supporting designs with or without a standard grip.
  • Type K and Type E thermocouple options.
  • Different head sizes to suit the available contact area.
  • Temperature ranges from −50°C to 200°C, 250°C or 500°C, depending on the model.
This website uses cookies to ensure you get the best experience on our website