- Out-of-Stock
Kunak Air Quality Sensor
The Kunak AIR Pro is a high-performance, sensor-based air quality monitoring station engineered for precise, real-time, multi-pollutant environmental assessment. Awarded Most Accurate Multi-Pollutant Sensor in the AIRLAB Microsensors Challenge, it delivers near-reference data quality for cities, heavy industries, researchers and smart-city infrastructure.
Kunak AIR Pro Outdoor Air Quality Monitor
The Kunak AIR Pro is a professional outdoor air quality monitoring station designed for accurate, real-time environmental assessment.
It provides near-reference measurement performance for smart cities, industrial facilities, research projects, construction sites and environmental studies.
Why Choose Kunak AIR Pro?
- High Measurement Accuracy: Designed and field-tested for professional environmental monitoring applications.
- Multi-Pollutant Measurements: Measures particulate matter and multiple target gases simultaneously.
- Smart Sensor Cartridges: Factory-calibrated sensor cartridges can be replaced without removing the complete monitoring station.
- Autonomous Outdoor Operation: Supports continuous operation using solar power and an internal backup battery.
- Remote Communication: Transmits measurements through cellular, Ethernet and Modbus communication.
Measurement Capabilities
- Particulate Matter: PM1, PM2.5, PM10, total suspended particles and total particle count.
- Target Gases: Carbon monoxide, carbon dioxide, nitrogen monoxide, nitrogen dioxide, ozone, sulphur dioxide, hydrogen sulphide, ammonia, methane and volatile organic compounds.
- Environmental Parameters: Temperature, relative humidity, atmospheric pressure and dew point.
- Optional External Measurements: Wind speed, wind direction, noise and rainfall.
Technical Specifications
- Enclosure: IP65 weather-resistant construction.
- Dimensions: 257 × 270 × 225 mm.
- Weight: Less than 3.5 kg.
- Operating Temperature: −20 °C to +60 °C.
- Operating Humidity: Up to 99% RH under non-condensing conditions.
- Sampling Interval: Configurable from 10 seconds to 24 hours.
- Internal Battery: 26 Ah lithium battery for independent operation, depending on configuration.
- Power Consumption: Low-power operation based on the selected sensor configuration.
Kunak AIR Cloud Platform
Kunak AIR Cloud centralizes monitoring stations in a browser-based interface. Users can review real-time measurements, visualize monitoring locations, analyse historical data and produce automated air-quality reports.
Measurement data can also be exported for integration with authorized third-party monitoring and reporting systems.
Common Applications
- Smart Cities: Identify localized pollution conditions and evaluate traffic-management measures.
- Industrial Perimeter Monitoring: Monitor emissions around factories, chemical plants, mines and manufacturing facilities.
- Environmental Studies: Conduct baseline surveys for research, infrastructure projects and environmental audits.
- Construction Monitoring: Monitor dust, gases and environmental conditions around active construction areas.
- Community Monitoring: Provide reliable local air-quality information for public and private initiatives.
You might also like
The Vaisala HMDW80 Series provides cost-effective humidity and temperature measurement for routine HVAC and building-automation applications.
- Humidity accuracy up to ±3% RH
- Wall, duct and outdoor installation models
- Current or voltage output configurations
- Replaceable INTERCAP® humidity sensor
The Vaisala HMX110 Series provides accurate humidity and temperature measurement for demanding indoor, duct and outdoor HVAC applications.
- Humidity accuracy up to ±2% RH
- Wall, duct, outdoor and immersion models
- 4–20 mA or Modbus RTU configurations
- Traceable calibration certificate included
16 other products in the same category:
The Ryutai Kogyo MCF and E-MCF references relate to earlier metal tube flowmeters and transmitters. This page supports existing instrument identification and replacement enquiries.
For current options, see the Ryutai Kogyo EM Series. Confirm the complete model, flow range, connections and electrical requirements before selecting a replacement.
The Vaisala XMW85 Series provides reliable indoor CO2, humidity and temperature measurement for demand-controlled ventilation, smart buildings and indoor air-quality monitoring.
All models support Modbus RTU over RS-485, with two-in-one and three-in-one measurement configurations and optional metric or non-metric displays.
The Sato SK-650PH is a desktop digital pH meter with a sensor arm for convenient sample measurement.
- Automatic temperature compensation with a suitable sensor.
- One- to three-point calibration.
- Memory for up to 99 records.
- Sensor sensitivity and reading-stability indicators.
- RS-232C data transfer using an optional cable.
Probe and calibration solutions are sold separately. Measuring range and accuracy depend on the selected probe.
The Vaisala DRYCAP® Dew Point and Temperature Probe DMP8 provides reliable low-humidity measurement in pressurised pipelines with adjustable installation depth.
- Dew point measurement range from −70 to +80 °C Td/f
- Designed for pressurised processes from 0 to 40 bar absolute
- Adjustable insertion depth with ISO R 1/2 or NPT 1/2 process connection
- Optional ball-valve kit permits insertion and removal without shutting down the process
- Use with Modbus RTU, an Indigo transmitter or the portable Indigo80 handheld indicator
The Anritsu AM-8000 Series is discontinued and has been replaced by the AM-9000 Series.
For a replacement, select the appropriate channel count, thermocouple input configuration and recording interval.
- 6-channel and 12-channel replacement options.
- Fixed thermocouple-type or multi-input models.
- USB communication and optional AMS-950 analysis software.
- Confirm existing probe, connector and accessory compatibility.
The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.
- Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
- Existing HMT140 installations can continue to be supported
- Migration should be checked against the existing sensor and input type
- Contact Seacom for replacement selection and viewLinc compatibility
The Tokico MBA Series is an electrical signal-operated emergency shut-off valve using a CO₂ cartridge to power the cylinder actuator and close a ball valve.
- Catalogue connection sizes from 25 to 400 mm.
- CO₂-powered actuation without a plant compressed-air supply.
- Electrical triggering through suitable control equipment.
- Manual reset and horizontal or vertical piping installation.
Contact Seacom to confirm fluid compatibility, pressure, flange specification and control requirements.
The Vaisala DMT345 and DMT346 provided direct dew-point measurement in hot industrial drying processes. Both models are discontinued and replaced by Vaisala DMP5 or DMP6 smart probes with an Indigo transmitter.
- DMT345: former solution for processes up to +180 °C
- DMT346: former solution for very hot processes up to +350 °C
- DMT345 replacement: DMP5 with a suitable Indigo transmitter
- DMT346 replacement: DMP6 with a suitable Indigo transmitter
- Direct in-process measurement without a conventional sampling system
- Contact Seacom for mechanical and electrical migration review
The Watanabe WSPF Series offers compact plug-in signal converters for measurement and control applications.
- Signal isolators and high-speed isolators.
- Transmitter loop supplies and temperature converters.
- RTD and potentiometer converter options.
- Single-output and two-output models.
- Front zero/span adjustment with ±10% adjustment range.
The Vaisala DL2000 combines precision temperature and relative-humidity monitoring with optional analog or door-contact inputs for viewLinc systems.
- Scheduled for future discontinuation; confirm availability before specifying
- Current replacement platform: Vaisala VDL200 with suitable smart probes
- Internal temperature and relative-humidity measurement
- Optional current, voltage or Boolean input configurations
- Onboard memory and a typical 10-year battery life
Kofloc precision mass flow meters and controllers measure or regulate gas mass flow with minimal influence from changes in operating temperature and pressure.
The range includes digital, compact, standard, high-grade and metal-sealed models for laboratory equipment, gas analysis, semiconductor processes, fuel cells, biotechnology, combustion control and industrial systems.
- Mass flow measurement and closed-loop gas flow control
- Digital, analogue and RS485-compatible model options
- Models with local displays and selectable gas settings
- Standard and metal-sealed construction options
- Suitable for equipment integration and process applications
Available series: EX-700R, EX-250S, EX-550, 8700, 3660, 3760, 3200, 3100, 5100 and 5410.
The Vaisala Indigo200 Series is the standard transmitter platform for one interchangeable Indigo-compatible smart probe, providing local display and practical automation-system connectivity.
- Indigo201 with three analog outputs and two relays
- Indigo202 with Modbus RTU and two relays
- Colour display with numerical and graphical views
- IP65 enclosure for industrial measurement applications
The Vaisala HPP270 Series provides stable, repeatable measurement for demanding vaporized hydrogen peroxide bio-decontamination processes.
- HPP271 measures vaporized H₂O₂ concentration
- HPP272 adds relative saturation, relative humidity and temperature
- H₂O₂ measurement range from 0 to 2000 ppm
- Accuracy of ±10 ppm or 5% of reading, whichever is greater
- Two 4–20 mA outputs or RS-485 with Modbus RTU
- IP65 stainless-steel construction with Vaisala PEROXCAP® technology
- Compatible with Vaisala Indigo transmitters and Indigo80
The Vaisala HM70 was a handheld meter for humidity and temperature spot checks, field measurements, data logging and verification of installed Vaisala instruments. It is discontinued and replaced by the Vaisala Indigo80 handheld indicator with an HMP80 probe.
- Legacy MI70 handheld indicator with HMP75, HMP76 or HMP77 probe
- Relative-humidity measurement from 0 to 100 %RH
- Probe-dependent temperature measurement from −70 to +180 °C
- Numerical and graphical display with portable data recording
- Current replacement: Indigo80 with HMP80N or HMP80L
- HMP80N for general measurements; HMP80L for extended temperature reach
The EDL DBB Series combines hot and cold black body targets for checking compatible infrared thermometers and pyrometers.
- DBB-350: Cold side −30 to 110°C; hot side ambient to 350°C.
- DBB-650: Cold side −30 to 110°C; hot side ambient to 650°C.
- 50.8 mm (2-inch) diameter targets.
- Provision for external reference sensors, sold separately.
- RS-232 interface and iTools software.
- 120 V and 240 V power versions available.
The RCM Flo-Gage Series 7000 and 8000 are rugged direct-reading differential-pressure flow meters for water, oils, chemicals, compressed air and other compatible liquids or gases.
- Large 90 mm direct-reading analogue dial
- Series 7000 threaded and Series 8000 wafer bodies
- Liquid, gas and selected steam configurations
- Approximately 6:1 measuring range
- Standard accuracy of ±3% full scale
- Optional reed switches, 4–20 mA transmitter and remote outputs