Tokico PFA resin series flowmeter has no moving parts, and the parts in contact with liquid are composed by PFA resin, and excellent in corrosion resistant and clean vortex flowmeter
The parts that come into contact with the liquid are made of PFA resin with excellent corrosion resistance, so there are no seals or pockets apart from the parts where pipes are connected. This makes the series suitable for measuring fluids like liquid chemicals, corrosive fluids and ultrapure water.
.
The flow meter for gas mixing uses a KOFLOC multiple flow meter to mix multicomponent fluids. Connection of pipes to respective gas inlets and the mixed gas outlet permit gases to be mixed. This flow meter is ideal for easy gas mixing in laboratories and studies.
Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber.
With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be process externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flowmeters.
The positive displacement flow technology allows for precise flow measurement of most clean liquids regardless of the media conductivity. Other liquid properties also have a minimal effect on the performance of this type of meter. Flow profile conditioning is not required as with alternative flow technology options making oval gear installations simple to install in tight spaces and at an economical price.
ONICON's FT-3000 Series family of Inline Electromagnetic Flow Meters are suitable for measuring electrically conductive liquids in a wide variety of commercial HVAC applications. The FT-3000 series provides analog and digital outputs for flow rate and programmable pulse outputs for flow totalization and/or alarms.
The FT-3000 Inline Electromagnetic Flow Meters are available in various sizes and arrive factory-configured for ease of installation and start-up. All FT-3000 series flow meters are wet calibrated in a flow laboratory against standards that are directly traceable to international standards. A certificate of calibration accompanies every meter. Typical applications include monitoring of cooling water, heating water, condenser water and domestic water.
RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy
The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.
Applications
Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.
TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range
Kent Elster Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.
The RCM Flo-Gage is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves
The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).
Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.
Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
Aichi Tokei Turbine gas meters TBZ and TBX series, developed to measure gas consumption of a small boiler, an individual furnace, or other individual gas equipment, are achieved to have high accuracy consists with the light-weighted compact stylish body.
They can widely correspond to maximum working pressure and maximum measuring flow-rate.
The built-in 2-systems pulse transmitter allows your configuration of a remote reading system or of an advanced energy management system. Also, TBZ series even offers temperature / pressure compensation function that is to display gas consumption converted to its volume at the standard conditions (0,1 atms ), etc.
Tokico PFA resin series flowmeter has no moving parts, and the parts in contact with liquid are composed by PFA resin, and excellent in corrosion resistant and clean vortex flowmeter
The parts that come into contact with the liquid are made of PFA resin with excellent corrosion resistance, so there are no seals or pockets apart from the parts where pipes are connected. This makes the series suitable for measuring fluids like liquid chemicals, corrosive fluids and ultrapure water.