Temperature Data Loggers DL1016/1416 (CMS, FDA Approved) Temperature Data Loggers DL1016/1416 (CMS, FDA Approved)
Temperature Data Loggers DL1016/1416 (CMS, FDA Approved)

Temperature Data Logger DL1016/DL1416/ DL1000/DL1400 (for GxP Compliant Continuous Monitoring System CMS viewLinc))

  • FDA 21 CFR Part 11, EU Annex 11, ICH Compliant

Vaisala's multi-application temperature data logger monitors temperatures in up to four applications with one logger – ultra-low temperature freezers, freezer/refrigerators and incubators. A superior alternative to chart recorders and hard-wired systems.

Vaisala DL1000, DL1016, 1400, DL1416 is a high-accuracy temperature data logger. Ideal for ultra-low temperature freezers, fridges, cold rooms in regulated environments, the DL1000-1400 temperature logger provides stable, reliable measurements. With a measurement range from -90 °C to +70 °C and stable accuracy at ±0.10°C, the DL1000-1400 series can take up to four inputs for monitoring or mapping temperatures in that range. This series also offers an optional input for door monitoring

The DL-series temperature loggers connect to Vaisala's viewLinc software to provide historical and real-time data, remote alarming, and reporting in compliance with global regulations and standards. The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems. If access to historical measurements is needed, the Vaisala OPC-UA Server can be used to integrate the viewLinc database with non-Vaisala systems.

Vaisala Official Distributor in Humidity, Dewpoint, Continuous Monitoring System (CMS) viewLinc (2015),
Temperature, CO2, Barometric Pressure, Moisture in Oil, Wind etc in Malaysia since 1990s

Features

  • Measurements are traceable to SI units through national metrology institutes (NIST USA, MIKES Finland, or equivalent) or ISO/IEC 17025 accredited calibration laboratories.
  • Long-life batteries and large on-board memory in each logger provide data immunity from power outages and network downtime.
  • Connectivity to your existing network can be achieved multiple ways, including PoE, wired or Wi-Fi.

Key Benefits

Easy to set up and use

The DL1016-1416 temperature data loggers can be used with Vaisala's continuous monitoring software viewLinc for trend and tabular data, remote alarming, and 21 CFR Part 11 compliant reports. The loggers allow fast and easy IQOQ validation. Optional on-site installation services provide smooth start-up.

Continuous temperature monitoring records for compliance

With large on-board memory and batteries with a typical life-span of ten years, data recorded at the point of measurement is immune to network and power interruptions. Ideal for both networked monitoring and standalone data logging, the DL1016/1416 is a versatile solution for measuring up to four applications with a single device.

Cost-effective multi-application monitoring

This 4-channel temperature logger eliminates the need to purchase and install additional hardware, allowing you to monitor different areas with a single data logger, from ultra-low temperature freezers, freezer/refrigerator units, to warehouses and incubators.

Stable, accurate measurements

Fully validatable and designed for regulated applications, the DL1000-1400 temperature data loggers are calibrated to ensure GxP-compliant measurement. Records are secure and formatted to help meet 21 CFR Part 11 and Annex 11 requirements. Measurements are traceable to SI units through national metrology institutes (NIST USA, MIKES Finland, or equivalent) or ISO/IEC 17025 accredited calibration laboratories.





Download

  DL1016/DL1416 Catalogue - Temperature Data Loggers DL1016/DL1416 (CMS, FDA Approved) (203.18k)
  DL1000/DL1400 Catalogue - Temperature Data Loggers DL1000/DL1400 (CMS, FDA Approved) (173.88k)
  DL1700 Catalogue - Thermocouple Data Loggers DL1700 (CMS, FDA Approved) (173.88k)
  HMT140 Catalogue - Wi-Fi Data Logger (CMS, FDA Approved) HMT140 (170.92k)
  DL4000 Catalogue - Universal Input Data Logger (CMS, FDA Approved) DL4000 (160.04k)
  DL2000 Catalogue - Temperature And RH Data Logger (CMS, FDA Approved) DL2000 (175.86k)
  CMS viewLinc Catalogue - Continuous Monitoring System viewLinc (CMS, FDA Approved) (299.97k)
  DL1000/1016/1400/1416 Order Form - (1.26M)

Specific References

You Might Also Like

.

Temperature And RH Data Logger (CMS, FDA Approved) DL2000
Vaisala

Temperature And RH Data Logger DL2000 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11, ICH Compliant

The Vaisala 2000 recorder combines internal temperature and RH sensors with an optional external channel for either current or voltage inputs for recording parameters such as differential pressure, CO2, level, particles, or conductivity. The Vaisala 2000 recorder can include a Boolean channel for door switches or alarm contacts.

Vaisala

Wi-Fi Data Logger HMT140 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

The Vaisala HMT140 wireless data logger is designed for humidity, temperature and analog signal monitoring in warehouses, freezer and cryogenic farms, laboratories, blood banks and many other life science applications

The Vaisala HMT140 incorporates Vaisala HUMICAP® technology to measure relative humidity and temperature accurately and reliably. The Vaisala HUMICAP sensor is resistant to dust and most chemicals. Alternatively, the Vaisala HMT140 can connect to Resistance Temperature Detectors (RTDs), Voltage, Current and Contact sensors, making the Vaisala HMT140 the most versatile Vaisala data logger for life science applications.

Vaisala Continuous Monitoring System viewLinc
Vaisala

Continuous Monitoring System viewLinc (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11

The Vaisala continuous monitoring system is ideal for both light and heavy industrial environments, as well as GxP-regulated applications, the system integrates a wide selection of data loggers, transmitters and Modbus devices to monitor several parameters: temperature, relative humidity, dew point temperature, CO2, differential pressure, door contacts, and more. The viewLinc software is backwards compatible and able to access data created with older versions of the software.

  • Used by 49 of world TOP 50 Pharmaceutical Companies
Thermocouple Data Loggers DL1700 (CMS, FDA Approved)
Vaisala

Thermocouple Data Logger DL1700 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11 Compliant

The DL1700 thermocouple data loggers provide accurate temperature data acquisition, remote alarming, and continuous monitoring.

The  loggers are ideal for demanding environments that use extreme temperatures, from -240 °C to 1760 °C; applications such as liquid nitrogen (LN2), ovens, sterilization chambers and other extreme temperatures in laboratories and industrial environments.

The loggers connect to Vaisala's viewLinc software to provide historical and real-time data, remote alarming, and reporting in compliance with global regulations and standards.

The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems. If access to historical measurements is needed, the Vaisala OPC-UA Server can be used to integrate the viewLinc database with non-Vaisala systems.

Temperature Data Loggers DL1016/1416 (CMS, FDA Approved)
Vaisala

Temperature Data Logger DL1016/DL1416/ DL1000/DL1400 (for GxP Compliant Continuous Monitoring System CMS viewLinc))

  • FDA 21 CFR Part 11, EU Annex 11, ICH Compliant

Vaisala's multi-application temperature data logger monitors temperatures in up to four applications with one logger – ultra-low temperature freezers, freezer/refrigerators and incubators. A superior alternative to chart recorders and hard-wired systems.

Vaisala DL1000, DL1016, 1400, DL1416 is a high-accuracy temperature data logger. Ideal for ultra-low temperature freezers, fridges, cold rooms in regulated environments, the DL1000-1400 temperature logger provides stable, reliable measurements. With a measurement range from -90 °C to +70 °C and stable accuracy at ±0.10°C, the DL1000-1400 series can take up to four inputs for monitoring or mapping temperatures in that range. This series also offers an optional input for door monitoring

The DL-series temperature loggers connect to Vaisala's viewLinc software to provide historical and real-time data, remote alarming, and reporting in compliance with global regulations and standards. The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems. If access to historical measurements is needed, the Vaisala OPC-UA Server can be used to integrate the viewLinc database with non-Vaisala systems.

9 other products in the same category:

.

Vaisala Temperature and Humidity Logger VDL200
Vaisala

Temperature And RH Data Logger VDL200 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11 Compliant

Vaisala VDL200 is an Ethernet-connected data logger for continuous monitoring systems.
It provides high accuracy measurements from up to 2 detachable humidity, temperature, and carbon dioxide probes.
Suitable applications include real-time measurements in environments where wired connections are preferred.
VDL200 is compatible with the Vaisala viewLinc Enterprise Server software.

Temperature And RH Data Logger (CMS, FDA Approved) DL2000
Vaisala

Temperature And RH Data Logger DL2000 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11, ICH Compliant

The Vaisala 2000 recorder combines internal temperature and RH sensors with an optional external channel for either current or voltage inputs for recording parameters such as differential pressure, CO2, level, particles, or conductivity. The Vaisala 2000 recorder can include a Boolean channel for door switches or alarm contacts.

Cabinet for Continuous Monitoring System (CMS)
Vaisala

Cabinet CAB100 for Continuous Monitoring System (CMS)

Vaisala CMS Industrial Cabinet CAB100 integrates Vaisala’s world-class instruments for monitoring differential pressure and other parameters into a simple, preconfigured instrument panel. In combination with the Vaisala viewLinc Enterprise Server Software, the cabinet provides pre-installed real-time monitoring of your critical environments.

Vaisala Continuous Monitoring System viewLinc
Vaisala

Continuous Monitoring System viewLinc (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11

The Vaisala continuous monitoring system is ideal for both light and heavy industrial environments, as well as GxP-regulated applications, the system integrates a wide selection of data loggers, transmitters and Modbus devices to monitor several parameters: temperature, relative humidity, dew point temperature, CO2, differential pressure, door contacts, and more. The viewLinc software is backwards compatible and able to access data created with older versions of the software.

  • Used by 49 of world TOP 50 Pharmaceutical Companies
Vaisala

Wi-Fi Data Logger HMT140 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

The Vaisala HMT140 wireless data logger is designed for humidity, temperature and analog signal monitoring in warehouses, freezer and cryogenic farms, laboratories, blood banks and many other life science applications

The Vaisala HMT140 incorporates Vaisala HUMICAP® technology to measure relative humidity and temperature accurately and reliably. The Vaisala HUMICAP sensor is resistant to dust and most chemicals. Alternatively, the Vaisala HMT140 can connect to Resistance Temperature Detectors (RTDs), Voltage, Current and Contact sensors, making the Vaisala HMT140 the most versatile Vaisala data logger for life science applications.

Long Range Wireless Data Logger (CMS, FDA Approved) RFL100
Vaisala

Long Range Wireless Data Logger RFL100 (for GxP Compliant Continuous Monitoring System CMS viewLinc))

  • FDA 21 CFR Part 11, EU Annex 11 Compliant

The Vaisala RFL100 Data Logger uses Vaisala’s proprietary VaiNet wireless technology. It can be used to monitor temperature (T), relative humidity (RH), and carbon dioxide level (CO2) in a wide range of environments. Suitable applications include warehouses, production areas, cleanrooms, laboratories, incubators, fridges, cold storage areas, and freezers down to −196 °C (approx. −320 °F).

Thermocouple Data Loggers DL1700 (CMS, FDA Approved)
Vaisala

Thermocouple Data Logger DL1700 (for GxP Compliant Continuous Monitoring System CMS viewLinc)

  • FDA 21 CFR Part 11, EU Annex 11 Compliant

The DL1700 thermocouple data loggers provide accurate temperature data acquisition, remote alarming, and continuous monitoring.

The  loggers are ideal for demanding environments that use extreme temperatures, from -240 °C to 1760 °C; applications such as liquid nitrogen (LN2), ovens, sterilization chambers and other extreme temperatures in laboratories and industrial environments.

The loggers connect to Vaisala's viewLinc software to provide historical and real-time data, remote alarming, and reporting in compliance with global regulations and standards.

The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems. If access to historical measurements is needed, the Vaisala OPC-UA Server can be used to integrate the viewLinc database with non-Vaisala systems.

Vaisala

Differential Pressure Transmitter PDT101 PDT102

The PDT101 differential pressure transmitter is designed for demanding cleanroom applications. The sensor integrates with the Vaisala viewLinc monitoring system to measure and monitor pressure differentials in regulated environments. Ideal for high performance cleanroom environments in the life science, semiconductor and electronics industries.

back to top