- Out-of-Stock
HMD110 HMW110 catalogue
Humidity And Temperature Transmitters For High-Accuracy Measurements In HVAC Applications HMD110 HMW110
834.31KB
Vaisala HMD60 High-Performance Duct Humidity and Temperature Transmitter
The Vaisala HMD60 Series provides high-accuracy humidity and temperature measurement for demanding HVAC ducts and light-industrial applications.
- Humidity accuracy up to ±1.5% RH
- Temperature accuracy up to ±0.1 °C
- Analog, Modbus RTU and BACnet MS/TP options
- Robust IP66 metal enclosure
Vaisala HMD60 Duct Humidity and Temperature Transmitter
The Vaisala HUMICAP® HMD60 Series is designed for accurate humidity and temperature measurement in demanding HVAC ducts and light-industrial applications. Its high measurement performance, durable metal enclosure and resistance to dust and chemicals make it suitable for cleanrooms, laboratories, museums and critical air-handling systems.
The series includes analog humidity-and-temperature and temperature-only models, together with a digital model supporting Modbus RTU and BACnet MS/TP. Every HMD60 Series transmitter is supplied with a traceable calibration certificate.
High-Performance Duct Measurement
The HMD60 Series measures relative humidity from 0–100% RH with accuracy up to ±1.5% RH from 0–90% RH at 0 to +40 °C. Temperature accuracy reaches ±0.1 °C under specified conditions.
The stainless-steel probe operates from −40 to +80 °C, while the IP66 cast-aluminium enclosure protects the electronics in demanding plant-room and industrial environments. A sintered filter allows use at duct air speeds up to 50 m/s.
Analog, Modbus and BACnet Integration
Choose HMD62 for loop-powered 4–20 mA humidity and temperature outputs, TMD62 for temperature-only 4–20 mA output, or HMD65 when voltage outputs and digital building-automation communication are required.
The HMD65 provides two 0–10 V outputs and an isolated RS-485 interface. Modbus RTU or BACnet MS/TP can be selected and configured using on-board switches or Vaisala Insight PC software.
Calculated Humidity Parameters
In addition to relative humidity and temperature, configurable models can provide dew point, dew/frost point, absolute humidity, mixing ratio, wet-bulb temperature and enthalpy. Select the required parameters and output scaling according to the building-management or process-control system.
Key HMD60 Series Features
- 0–100% RH measurement range
- Humidity accuracy up to ±1.5% RH
- Temperature accuracy up to ±0.1 °C
- 4–20 mA, 0–10 V, Modbus RTU and BACnet MS/TP options
- IP66 cast-aluminium enclosure
- Stainless-steel duct probe
- HUMICAP® R2 or catalytic HUMICAP® 180V sensor
- Calculated humidity-parameter options
- Configuration and calibration using Vaisala Insight software
- Traceable calibration certificate included
Individual HMD60 Series Models
| Model | Measurement | Output | Recommended use |
|---|---|---|---|
| HMD62 | Humidity and temperature | 2 × 4–20 mA, loop powered | High-accuracy analog duct measurement |
| TMD62 | Temperature only | 1 × 4–20 mA, loop powered | High-accuracy duct temperature measurement |
| HMD65 | Humidity and temperature | 2 × 0–10 V plus Modbus RTU or BACnet MS/TP | Digital building automation or combined analog and network integration |
Quick selection: choose HMD62 for conventional 4–20 mA humidity and temperature signals, TMD62 when only temperature is required, or HMD65 for 0–10 V outputs with Modbus RTU or BACnet MS/TP communication.
Vaisala HMD60, HMD80 or HMD110?
All three families provide duct-mounted humidity and temperature measurement. Select the series according to the required accuracy, enclosure construction, output interface, calibration documentation and project budget.
| Selection point | Vaisala HMD60 Series | Vaisala HMD80 Series | Vaisala HMD110 Series |
|---|---|---|---|
| Product position | High-performance duct measurement | Cost-effective routine HVAC | Balanced high-accuracy HVAC |
| Humidity accuracy | Up to ±1.5% RH | Up to ±3% RH | Up to ±2% RH |
| Temperature accuracy | Up to ±0.1 °C | Up to ±0.3–0.5 °C, depending on model and conditions | Up to ±0.2 °C |
| Installation | Ventilation duct | Ventilation duct | Ventilation duct |
| Enclosure | IP66 cast aluminium | IP65 polymer enclosure | IP65 glass-reinforced polymer enclosure |
| Output options | 4–20 mA, 0–10 V, Modbus RTU or BACnet MS/TP | 4–20 mA or 0–10 V | 4–20 mA or Modbus RTU |
| Local display | No | Available on selected models | Optional |
| Calibration certificate | Traceable certificate included | Not supplied | Traceable certificate included |
| Best fit | Critical ducts, harsh plant rooms and projects requiring BACnet or the highest accuracy | Routine HVAC where economy is the priority | Demanding HVAC needing good accuracy, IP65 protection and calibration documentation |
Quick selection: choose HMD60 when the highest accuracy, a metal IP66 enclosure or BACnet is required. Choose HMD110 for a strong balance of accuracy, IP65 protection and traceable calibration. Choose HMD80 for routine HVAC projects where standard accuracy and lower cost are the priorities.
Common HMD60 Applications
- Cleanroom and laboratory ventilation systems
- Museums, archives and collections storage
- Pharmaceutical and medical-device facilities
- Critical supply-air and return-air ducts
- Industrial air-handling and drying systems
- Building automation using Modbus RTU or BACnet MS/TP
Information Required for Model Selection
Before ordering, confirm whether humidity and temperature or temperature only must be measured, the required accuracy, duct temperature, maximum air speed, output signal, communication protocol, calculated parameters, sensor type and calibration requirements.
For digital integration, provide the controller protocol, RS-485 network settings and available power supply. For analog models, confirm the controller input type, loop resistance and required measurement scaling.
Humidity Monitoring for Data Centres
Planning measurements for server rooms or air-handling systems? Explore sensor placement, relative humidity, dew point and monitoring-system requirements.
Read our data centre humidity and temperature monitoring guide
Vaisala HMD60 Supplier and Technical Support in Malaysia
Seacom Process Instruments supplies and supports the Vaisala HMD60 Series duct humidity and temperature transmitters in Malaysia for cleanrooms, laboratories, museums, pharmaceutical facilities, critical HVAC systems and light-industrial applications.
Our team can assist with HMD62, TMD62 or HMD65 selection, humidity sensor, output signal, Modbus or BACnet settings, duct installation, controller integration, commissioning and calibration planning.
Contact Seacom with your duct conditions, required accuracy, measurement parameters and building-automation interface so we can recommend a suitable HMD60 configuration.
You might also like
The Vaisala HMDW80 Series provides cost-effective humidity and temperature measurement for routine HVAC and building-automation applications.
- Humidity accuracy up to ±3% RH
- Wall, duct and outdoor installation models
- Current or voltage output configurations
- Replaceable INTERCAP® humidity sensor
The Vaisala HMX110 Series provides accurate humidity and temperature measurement for demanding indoor, duct and outdoor HVAC applications.
- Humidity accuracy up to ±2% RH
- Wall, duct, outdoor and immersion models
- 4–20 mA or Modbus RTU configurations
- Traceable calibration certificate included
16 other products in the same category:
The Vaisala HMP7 is designed for continuously humid, rapidly changing and near-condensing environments. Probe heating helps prevent condensation while maintaining reliable process measurement.
- Humidity accuracy up to ±0.8% RH
- Probe heating for condensation prevention
- −70 to +180 °C probe-head measurement range
- Standalone Modbus RTU or Vaisala Indigo transmitter operation
The Vaisala GMW90 Series provides stable wall-mounted carbon-dioxide and temperature measurement, with optional humidity, for demanding HVAC and building-automation applications.
- Carbon-dioxide measurement from 0 to 5000 ppm
- CO₂ accuracy up to ±(30 ppm + 2% of reading)
- Temperature measurement from −5 to +55 °C
- Optional HUMICAP® relative-humidity measurement from 0 to 95 %RH
- Voltage, current or Modbus RTU output models
- Display and CO₂ status-indicator options
- Field-exchangeable calibrated measurement modules
- Traceable three-point CO₂ calibration certificate included
The Vaisala HMM100 provides reliable humidity measurement and a configurable analog output for integration into environmental chambers and OEM equipment.
- 0–100% RH measurement range
- Relative-humidity or dew-point output
- Current and voltage output options
- Plastic or stainless-steel probes for temperatures up to +180 °C
The Vaisala HMP155 provides stable humidity and temperature measurement for automatic weather stations, road-weather systems, airports, research sites and demanding outdoor monitoring.
- Relative-humidity measurement from 0 to 100 %RH
- Operating range from −80 to +60 °C
- HMP155A with two analogue voltage outputs
- HMP155D with RH voltage output and passive four-wire Pt100 temperature
- HMP155E with RS-485 digital output
- Optional warmed probe, chemical purge and additional temperature sensor
The Vaisala HMP110 is a high-accuracy humidity and temperature probe designed for demanding equipment integration, environmental chambers, data loggers, incubators and controlled-environment applications.
It provides ±1.5% RH accuracy, a 0–100% RH range, −40 °C to +80 °C temperature measurement, a chemically resistant HUMICAP 180R sensor and analog or Modbus RTU output options.
The Vaisala MGP261 measures methane, carbon dioxide and humidity directly in raw biogas. Its in-situ design avoids a separate sampling system and helps operators monitor gas quality while protecting downstream equipment.
- Measures CH4, CO2 and water vapour in one probe
- 0–100 vol-% measurement range for methane and carbon dioxide
- Humidity output as 0–25 vol-% H2O or −10 to +60 °C dew point
- Heated optics help prevent condensation in wet biogas
- Three isolated 4–20 mA outputs and RS-485 Modbus RTU
- Ex-certified construction for direct installation in hazardous process areas
The Vaisala HMP3 is a high-accuracy, field-maintainable probe for industrial HVAC, air-handling units, cleanrooms, paint booths and environmental chambers.
- Humidity accuracy up to ±0.8% RH
- Temperature measurement from −40 to +120 °C
- Field-replaceable filter and HUMICAP sensor option
- Standalone Modbus RTU or Vaisala Indigo transmitter operation
The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.
- Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
- Existing HMT140 installations can continue to be supported
- Migration should be checked against the existing sensor and input type
- Contact Seacom for replacement selection and viewLinc compatibility
The Vaisala HMDW80 Series provides cost-effective humidity and temperature measurement for routine HVAC and building-automation applications.
- Humidity accuracy up to ±3% RH
- Wall, duct and outdoor installation models
- Current or voltage output configurations
- Replaceable INTERCAP® humidity sensor
The Vaisala HMT360 Series was an intrinsically safe transmitter platform for humidity, temperature and moisture measurement in hazardous areas. It is discontinued and replaced by the Vaisala HMT370EX with an application-specific probe.
- HMT361 wall mounting → HMP371
- HMT363 ducts and confined spaces → HMP373
- HMT364 high pressure and vacuum → HMP374
- HMT365 high temperature → HMP375
- HMT367 high humidity → HMP377
- HMT368 pressurised pipelines → HMP378
The Vaisala Indigo300 is a rugged industrial transmitter for one Vaisala Indigo-compatible smart probe, providing local measurement display and up to three configurable analog outputs.
Its corrosion-resistant IP66 metal enclosure, flexible probe mounting and interchangeable probe design make Indigo300 suitable for humidity, temperature, dew point, CO2, moisture in oil and other demanding industrial measurements.
The Vaisala HMM105 provides reliable humidity measurement for integration into environmental chambers, incubators and OEM equipment.
- 0–100% RH measurement range
- I2C output for relative humidity or dew point
- Detachable 12 mm probe with 300 mm flexible cable
- Probe withstands +180 °C continuously and +200 °C temporarily
The Vaisala HMT120 and HMT130 provide accurate, stable humidity and temperature measurement for cleanrooms, laboratories, data centres and demanding HVAC applications.
Product transition: HMT120/HMT130 are expected to be phased out. For new projects, the Vaisala Origo10 is the recommended replacement platform.
- Humidity accuracy up to ±1.5% RH
- HMT120 loop-powered 4–20 mA output
- HMT130 voltage outputs, RS-485 and relay
- Interchangeable fixed or remote measurement probe
- Origo10 recommended for new installations
The Vaisala Indigo500 Series provides flagship industrial measurement integration: choose Indigo510 for a simplified single-probe system or Indigo520 for full dual-probe capability.
- Indigo510: one probe and two isolated analog outputs
- Indigo520: two probes, four isolated outputs and two relays
- Ethernet web interface and Modbus TCP communication
- Rugged IP66 and NEMA 4 metal enclosure
The Vaisala HMP8 provides high-accuracy humidity and temperature measurement in compressed air, refrigerant dryers and pressurised industrial processes up to 40 bar.
- Humidity accuracy up to ±0.8% RH
- Operating pressure from vacuum to 40 bar
- Adjustable insertion depth with two probe lengths
- Optional ball valve for insertion and removal under process conditions
The Vaisala HMW90 Series provides high-accuracy humidity and temperature measurement for demanding indoor HVAC and controlled-environment applications.
- Humidity accuracy up to ±1.7% RH
- Analog or Modbus RTU output models
- Optional display and configurable relay
- Replaceable measurement module with calibration certificate