- Out-of-Stock
HMM100 catalogue
Humidity Module HMM100
872KB
Vaisala HMM105 Digital Humidity Module for Environmental Chambers
The Vaisala HMM105 provides reliable humidity measurement for integration into environmental chambers, incubators and OEM equipment.
- 0–100% RH measurement range
- I2C output for relative humidity or dew point
- Detachable 12 mm probe with 300 mm flexible cable
- Probe withstands +180 °C continuously and +200 °C temporarily
Vaisala HMM105 Digital Humidity Module
The Vaisala HUMICAP® HMM105 is an open-frame module for equipment manufacturers who need dependable humidity measurement inside an environmental chamber or incubator. Its separate probe assembly allows the sensing point to be placed inside the chamber while the circuit board remains in a suitable protected location.
The module communicates directly with the host controller through an I2C interface. The controller can read relative humidity or dew point, monitor device status, change operating parameters and carry out measurement adjustments without adding an external transmitter.
Designed for Chamber and Incubator Integration
The HMM105 combines a compact circuit board with a detachable probe head, M10 × 1 mounting thread and 300 mm flexible cable. This arrangement simplifies installation in equipment where available space, service access and the separation of electronics from the measurement area must be considered.
Full temperature compensation supports reliable humidity measurement across demanding chamber conditions. The probe can operate continuously at temperatures up to +180 °C and tolerate short-term exposure up to +200 °C, making it suitable for equipment that includes high-temperature cycles or heat sterilisation. The component board must remain within its specified operating-temperature range.
Key HMM105 Features
- Measures relative humidity from 0–100% RH
- Provides relative-humidity or dew-point values through I2C
- I2C slave interface for integration with an OEM controller
- Vaisala HUMICAP® 180R sensor for stable humidity measurement
- Detachable probe assembly for practical equipment installation
- 12 mm probe head with M10 × 1 thread
- 300 mm flexible probe cable
- Two-point traceable calibration certificate supplied
HMM100, HMM105 or HMM170?
All three modules are intended for integration into environmental chambers or OEM equipment. The correct choice depends mainly on the required electrical interface, chamber conditions and maintenance functions.
| Selection point | Vaisala HMM100 | Vaisala HMM105 | Vaisala HMM170 |
|---|---|---|---|
| Best suited for | Conventional chambers requiring one analog measurement output | OEM chambers and incubators with direct I2C controller integration | Demanding chambers requiring higher accuracy, multiple outputs or condensation protection |
| Measured parameters | Relative humidity or dew point | Relative humidity or dew point | Relative humidity, temperature, dew point and other calculated parameters |
| Humidity range | 0–100% RH | 0–100% RH | 0–100% RH |
| RH accuracy at −20 to +40 °C | ±2% RH from 0–90% RH | ±2% RH from 0–90% RH | Approximately ±1.0 to ±1.7% RH, depending on the reading |
| Primary output | One configurable current or voltage output | Digital I2C | Modbus RTU and three configurable analog outputs |
| Probe temperature capability | Up to +180 °C, depending on probe and filter | Up to +180 °C continuously; +200 °C short-term peak | −70 to +180 °C |
| Probe arrangement | Plastic or stainless-steel probe with several cable and length options | Detachable 12 mm probe with fixed 300 mm flexible cable | 12 mm stainless-steel probe with 2, 5 or 10 m cable options |
| Condensation and chemical protection | Standard HUMICAP measurement without active probe heating | Standard HUMICAP measurement without active probe heating | Optional sensor purge, probe heating and sensor warming |
| Configuration and servicing | Service port and on-board adjustment trimmers | Configuration and adjustment through the I2C interface | Vaisala Insight software through the integrated service port |
Quick selection: choose HMM100 when the chamber controller needs a conventional analog signal. Choose HMM105 when direct I2C communication and a compact detachable probe are required. Choose HMM170 for new demanding designs that need better accuracy, Modbus RTU, several analog outputs, longer probe cables or active condensation protection.
Integration Information to Confirm
Before ordering the HMM105, confirm the chamber temperature and humidity range, controller supply voltage, I2C implementation, preferred output parameter, probe mounting position, electronics-board location and exposure during sterilisation or cleaning cycles.
The HMM105 is a component module intended for integration by an equipment manufacturer or system designer. The finished equipment should provide suitable mechanical protection, power, wiring, grounding and electromagnetic-compatibility arrangements.
Vaisala HMM105 Supplier and Technical Support in Malaysia
Seacom Process Instruments supplies and supports the Vaisala HMM105 Digital Humidity Module in Malaysia for environmental chambers, incubators, test equipment and other OEM humidity-measurement applications.
Our team can assist with model comparison, probe mounting, controller-interface requirements, installation planning and calibration support. We can also help determine whether the analog HMM100, I2C HMM105 or advanced HMM170 is the most suitable platform for your equipment.
Contact Seacom with your chamber operating range, sterilisation temperature, controller interface, available installation space and required output so we can recommend a suitable humidity-module configuration.
You might also like
The Vaisala HMM100 provides reliable humidity measurement and a configurable analog output for integration into environmental chambers and OEM equipment.
- 0–100% RH measurement range
- Relative-humidity or dew-point output
- Current and voltage output options
- Plastic or stainless-steel probes for temperatures up to +180 °C
The Vaisala HMM170 provides accurate and stable humidity and temperature measurement for demanding environmental chambers, including vacuum and pressurised applications.
- Humidity accuracy up to ±1.0% RH
- Temperature measurement from −70 to +180 °C
- Modbus RTU and three configurable analog outputs
- Probe heating, sensor warming and chemical-purge options
16 other products in the same category:
The Vaisala HMT120 and HMT130 provide accurate, stable humidity and temperature measurement for cleanrooms, laboratories, data centres and demanding HVAC applications.
Product transition: HMT120/HMT130 are expected to be phased out. For new projects, the Vaisala Origo10 is the recommended replacement platform.
- Humidity accuracy up to ±1.5% RH
- HMT120 loop-powered 4–20 mA output
- HMT130 voltage outputs, RS-485 and relay
- Interchangeable fixed or remote measurement probe
- Origo10 recommended for new installations
The Vaisala HMP9 combines a miniature 5 mm probe head with fast-response, high-accuracy humidity and temperature measurement for tight spaces and rapidly changing environments.
- Humidity accuracy up to ±0.8% RH
- Temperature accuracy up to ±0.1 °C
- −40 to +120 °C probe-head measurement range
- Standalone Modbus RTU or Vaisala Indigo transmitter operation
The Vaisala HMP1 is a high-accuracy, interchangeable humidity and temperature probe for indoor spaces. It connects directly to an Indigo200 or Indigo300 transmitter to create a compact wall-mounted measurement system.
- Humidity accuracy up to ±1.0% RH
- Temperature accuracy up to ±0.2 °C
- 0–100% RH and −40 to +60 °C measurement ranges
- Modbus RTU and full Vaisala Indigo compatibility
The Vaisala HMX110 Series provides accurate humidity and temperature measurement for demanding indoor, duct and outdoor HVAC applications.
- Humidity accuracy up to ±2% RH
- Wall, duct, outdoor and immersion models
- 4–20 mA or Modbus RTU configurations
- Traceable calibration certificate included
The Vaisala HMP8 provides high-accuracy humidity and temperature measurement in compressed air, refrigerant dryers and pressurised industrial processes up to 40 bar.
- Humidity accuracy up to ±0.8% RH
- Operating pressure from vacuum to 40 bar
- Adjustable insertion depth with two probe lengths
- Optional ball valve for insertion and removal under process conditions
The Vaisala HMP5 provides high-accuracy humidity and temperature measurement in ovens, dryers, kilns and other processes operating at temperatures up to +180 °C.
- Humidity accuracy up to ±0.8% RH
- Temperature accuracy up to ±0.1 °C
- −70 to +180 °C probe-head measurement range
- Standalone Modbus RTU or Vaisala Indigo transmitter operation
The Vaisala Origo10 Series comprises modular HVAC transmitters with interchangeable probes for humidity, temperature, CO2 and dew-point measurement.
Available with analog, Modbus RTU and BACnet MS/TP outputs, wall or duct mounting, an optional display and an IP65-rated enclosure.
The Vaisala HMDW80 Series provides cost-effective humidity and temperature measurement for routine HVAC and building-automation applications.
- Humidity accuracy up to ±3% RH
- Wall, duct and outdoor installation models
- Current or voltage output configurations
- Replaceable INTERCAP® humidity sensor
The Vaisala PTU300 combined barometric pressure, relative humidity and temperature in one transmitter. The series is discontinued and has been replaced by a suitable Indigo520 barometric-pressure configuration with an application-specific HMP probe.
- Legacy three-in-one pressure, humidity and temperature transmitter
- PTU301, PTU303, PTU304, PTU305, PTU307 and PTU308 variants
- Former applications include laboratories, meteorology and semiconductor measurement
- Current replacement platform: Indigo520 with barometric-pressure measurement
- Humidity probe selected according to mounting and process conditions
- Existing wiring, outputs and process connections require migration review
The Vaisala HMM170 provides accurate and stable humidity and temperature measurement for demanding environmental chambers, including vacuum and pressurised applications.
- Humidity accuracy up to ±1.0% RH
- Temperature measurement from −70 to +180 °C
- Modbus RTU and three configurable analog outputs
- Probe heating, sensor warming and chemical-purge options
The Vaisala Indigo300 is a rugged industrial transmitter for one Vaisala Indigo-compatible smart probe, providing local measurement display and up to three configurable analog outputs.
Its corrosion-resistant IP66 metal enclosure, flexible probe mounting and interchangeable probe design make Indigo300 suitable for humidity, temperature, dew point, CO2, moisture in oil and other demanding industrial measurements.
The Vaisala HMT330 Series was a flagship industrial transmitter platform for humidity, temperature and calculated moisture parameters. It is discontinued and replaced by an Indigo500 transmitter with the HMP probe selected for the application.
- HMT331 wall mounting → HMP1 with Indigo500
- HMT333 ducts and tight spaces → HMP3 or HMP9 with Indigo500
- HMT334 high pressure and vacuum → HMP4 with Indigo500
- HMT335 high temperature → HMP5 with Indigo500
- HMT337 high humidity → HMP7 with Indigo500
- HMT338 pressurised pipelines → HMP8 with Indigo500
The Vaisala HMP4 provides high-accuracy humidity and temperature measurement in compressed air, breathing air, industrial gases, vacuum systems and other processes operating at pressures up to 100 bar.
- Operating pressure below 100 bar, including vacuum applications
- Humidity accuracy up to ±0.8% RH
- Temperature range from -70 °C to +180 °C
- Standalone Modbus RTU or connection to an Indigo transmitter
The Vaisala GMW90 Series provides stable wall-mounted carbon-dioxide and temperature measurement, with optional humidity, for demanding HVAC and building-automation applications.
- Carbon-dioxide measurement from 0 to 5000 ppm
- CO₂ accuracy up to ±(30 ppm + 2% of reading)
- Temperature measurement from −5 to +55 °C
- Optional HUMICAP® relative-humidity measurement from 0 to 95 %RH
- Voltage, current or Modbus RTU output models
- Display and CO₂ status-indicator options
- Field-exchangeable calibrated measurement modules
- Traceable three-point CO₂ calibration certificate included
The Vaisala MGP261 measures methane, carbon dioxide and humidity directly in raw biogas. Its in-situ design avoids a separate sampling system and helps operators monitor gas quality while protecting downstream equipment.
- Measures CH4, CO2 and water vapour in one probe
- 0–100 vol-% measurement range for methane and carbon dioxide
- Humidity output as 0–25 vol-% H2O or −10 to +60 °C dew point
- Heated optics help prevent condensation in wet biogas
- Three isolated 4–20 mA outputs and RS-485 Modbus RTU
- Ex-certified construction for direct installation in hazardous process areas
The Vaisala HMP60 is a compact, durable and cost-effective humidity and temperature probe for equipment integration, data loggers, incubators, glove boxes, greenhouses and environmental monitoring systems.
It provides 0–100% RH and −40 °C to +60 °C measurement ranges, low power consumption, interchangeable Vaisala INTERCAP sensor and optional Modbus RTU communication.