Cart
Custom content

This is custom content

  • Out-of-Stock
    Vaisala HMP60

Vaisala HMP60 Humidity and Temperature Probe

The Vaisala HMP60 is a compact, durable and cost-effective humidity and temperature probe for equipment integration, data loggers, incubators, glove boxes, greenhouses and environmental monitoring systems.

It provides 0–100% RH and −40 °C to +60 °C measurement ranges, low power consumption, interchangeable Vaisala INTERCAP sensor and optional Modbus RTU communication.

Need advice or a quotation?

Ask Seacom about specifications, availability and the right instrument for your application.

Vaisala HMP60 Humidity and Temperature Probe

The Vaisala HMP60 is a compact humidity and temperature probe designed for volume applications and integration into equipment produced by other manufacturers. Its low power consumption, durable stainless-steel construction and flexible output options make it suitable for both fixed and battery-powered monitoring systems.

The probe measures relative humidity from 0–100% RH and temperature from −40 °C to +60 °C. Typical applications include incubators, glove boxes, greenhouses, fermentation chambers, data loggers and environmental monitoring equipment.

The HMP60 uses the field-replaceable Vaisala INTERCAP humidity sensor, reducing maintenance time because the sensor can be replaced without recalibrating the complete probe.

Why Choose the Vaisala HMP60?

  • Compact Probe Design The miniature probe is suitable for installations where available space is limited.
  • Low Power Consumption Average current consumption of approximately 1 mA makes the HMP60 suitable for battery-powered applications.
  • Interchangeable INTERCAP Sensor The humidity sensor can be replaced in the field without returning the complete probe for recalibration.
  • Flexible Output Selection Choose from several voltage outputs, an optional 4–20 mA converter or RS-485 Modbus RTU communication.
  • Easy Cable Connection A detachable cable with a standard four-pin M8 connector simplifies installation and replacement.
  • Rugged Construction The sealed AISI 316 stainless-steel probe body is designed for demanding environmental conditions.

Measurement Performance

  • Relative Humidity Range 0–100% RH.
  • Humidity Accuracy at 0 °C to +40 °C ±3% RH from 0–90% RH and ±5% RH from 90–100% RH.
  • Humidity Accuracy Outside the Central Range ±5% RH from 0–90% RH and ±7% RH from 90–100% RH at −40–0 °C and +40–60 °C.
  • Humidity Sensor Field-replaceable Vaisala INTERCAP capacitive humidity sensor.
  • Temperature Range −40 °C to +60 °C.
  • Temperature Accuracy at +10 °C to +30 °C ±0.5 °C.
  • Temperature Accuracy Across the Remaining Range ±0.6 °C from −40–10 °C and +30–60 °C.
  • Analog Output Accuracy ±0.2% of full scale at +20 °C.

Available Measurement Parameters

  • Relative Humidity Standard humidity measurement across the complete 0–100% RH range.
  • Temperature Standard temperature measurement from −40 °C to +60 °C.
  • Dew Point and Frost Point Optional calculated dew-point or frost-point temperature output.
  • Wet-Bulb Temperature Optional calculated wet-bulb temperature output.
  • Absolute Humidity Optional calculated absolute-humidity output.
  • Mixing Ratio and Enthalpy Optional calculated parameters for environmental and HVAC applications.

Outputs and Communication

  • Two Analog Channels Configurable output ranges include 0–1 VDC, 0–2.5 VDC, 0–5 VDC and 1–5 VDC.
  • Optional 4–20 mA Output Available using a separate single-channel loop-power converter.
  • Optional Digital Output Two-wire half-duplex RS-485 communication supporting Modbus RTU.
  • Vaisala Insight Compatibility Connect the probe to Vaisala Insight PC software for configuration, diagnostics and adjustment.
  • Vaisala Indigo80 Compatibility The HMP60 can be connected to the Vaisala Indigo80 handheld indicator using the appropriate cable.
  • Standard M8 Connection Four-pin M8 connector according to IEC 60947-5-2.

Electrical Specifications

  • Average Power Consumption Approximately 1 mA.
  • Maximum Peak Consumption Approximately 5 mA.
  • Supply for 1 V or 2.5 V Output 5–28 VDC.
  • Supply for 5 V Output 8–28 VDC.
  • Supply with Loop-Power Converter 8–28 VDC.
  • Supply with Digital Output 5–28 VDC.
  • Analog Start-Up Time Approximately two seconds at most valid operating voltages.
  • Digital Start-Up Time Approximately one second.

Mechanical and Environmental Specifications

  • Operating Temperature −40 °C to +60 °C.
  • Protection Rating IP65 when used with an appropriate sensor filter.
  • Probe Body AISI 316 stainless steel.
  • Probe Dimensions Approximately 71 mm long and 12 mm in diameter.
  • Body Thread M12 × 1 with a 10 mm thread length.
  • Probe Weight Approximately 17 g without a cable.
  • Probe and Short Cable Weight Approximately 28 g with a 0.3 m cable.
  • Sensor Protection Membrane, plastic-grid, stainless-steel and PTFE filter options are available.

Easy Installation and Maintenance

  • Detachable Probe Cable The screw-on M8 connector allows quick installation and probe replacement.
  • Multiple Cable Lengths Connection cables are available in different lengths and temperature ratings.
  • Field-Replaceable Sensor Replace the INTERCAP humidity sensor without replacing the complete probe.
  • Duct Installation An optional duct installation kit and mounting flange are available.
  • PC Configuration An optional USB service cable allows connection to Vaisala Insight PC software.
  • Flexible Equipment Integration The compact body and low power requirements simplify integration into third-party equipment.

Typical Applications

  • Data Loggers Low-power humidity and temperature measurement for portable and fixed data-acquisition systems.
  • Incubators Environmental measurement for research, laboratory and life-science incubators.
  • Glove Boxes Compact humidity and temperature monitoring in controlled work chambers.
  • Greenhouses Environmental measurement for crop research, horticulture and climate-control systems.
  • Fermentation Chambers Humidity and temperature measurement for controlled fermentation environments.
  • Original Equipment Integration Integration into environmental chambers, instruments and equipment manufactured by third parties.
  • Battery-Powered Monitoring Low-current operation for remote and portable monitoring equipment.
  • HVAC and Building Automation Compatible with selected modular transmitter and environmental-control configurations.

Accessories and Spare Parts

  • Replacement INTERCAP Sensor Available individually or in packages of ten sensors.
  • Sensor Filters Plastic-grid, membrane, stainless-steel, PTFE membrane and sintered PTFE filters are available.
  • Duct Installation Kit Accessory kit for mounting the HMP60 in an air duct.
  • 4–20 mA Loop-Power Converter Separate converter for applications requiring a current-loop output.
  • USB Service Cable Connects the HMP60 to Vaisala Insight PC software.
  • Indigo80 Connection Cable Connects the probe to the Vaisala Indigo80 handheld indicator.

Vaisala HMP60 Supplier in Malaysia

Seacom Process Instruments supplies the Vaisala HMP60 humidity and temperature probe in Malaysia. Our team can assist with selecting the measurement parameters, output signals, cable length, sensor filter and mounting accessories required for your application.

Contact Seacom for HMP60 product selection, pricing and availability for data loggers, incubators, glove boxes, greenhouses, fermentation chambers and equipment-integration projects.

Product documents

Catalogues, manuals and other files available for this instrument.

You might also like

Vaisala HMP110
  • Out-of-Stock

The Vaisala HMP110 is a high-accuracy humidity and temperature probe designed for demanding equipment integration, environmental chambers, data loggers, incubators and controlled-environment applications.

It provides ±1.5% RH accuracy, a 0–100% RH range, −40 °C to +80 °C temperature measurement, a chemically resistant HUMICAP 180R sensor and analog or Modbus RTU output options.

Vaisala HMW90 Humidity Transmitter | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala HMW90 Series provides high-accuracy humidity and temperature measurement for demanding indoor HVAC and controlled-environment applications.

  • Humidity accuracy up to ±1.7% RH
  • Analog or Modbus RTU output models
  • Optional display and configurable relay
  • Replaceable measurement module with calibration certificate
Vaisala Humidity And Temperature Transmitter XMP10
  • Out-of-Stock

The Vaisala XMP10 Series comprises compact humidity and temperature probes offering accuracy levels up to ±1% RH and ±0.1 °C for demanding HVAC, data-centre and critical-environment applications.

The probes feature analog or Modbus RTU outputs, a standard M8 connector, an IP65-rated body and compatibility with Vaisala Origo10 modular HVAC transmitters.

16 other products in the same category:

Vaisala PTU300 Transmitter | Indigo520
  • Out-of-Stock

The Vaisala PTU300 combined barometric pressure, relative humidity and temperature in one transmitter. The series is discontinued and has been replaced by a suitable Indigo520 barometric-pressure configuration with an application-specific HMP probe.

  • Legacy three-in-one pressure, humidity and temperature transmitter
  • PTU301, PTU303, PTU304, PTU305, PTU307 and PTU308 variants
  • Former applications include laboratories, meteorology and semiconductor measurement
  • Current replacement platform: Indigo520 with barometric-pressure measurement
  • Humidity probe selected according to mounting and process conditions
  • Existing wiring, outputs and process connections require migration review
Vaisala Transmitter Indigo300
  • Out-of-Stock

The Vaisala Indigo300 is a rugged industrial transmitter for one Vaisala Indigo-compatible smart probe, providing local measurement display and up to three configurable analog outputs.

Its corrosion-resistant IP66 metal enclosure, flexible probe mounting and interchangeable probe design make Indigo300 suitable for humidity, temperature, dew point, CO2, moisture in oil and other demanding industrial measurements.

CO2, Temperature and Humidity Transmitter Series GMW90
  • Out-of-Stock

The Vaisala GMW90 Series provides stable wall-mounted carbon-dioxide and temperature measurement, with optional humidity, for demanding HVAC and building-automation applications.

  • Carbon-dioxide measurement from 0 to 5000 ppm
  • CO₂ accuracy up to ±(30 ppm + 2% of reading)
  • Temperature measurement from −5 to +55 °C
  • Optional HUMICAP® relative-humidity measurement from 0 to 95 %RH
  • Voltage, current or Modbus RTU output models
  • Display and CO₂ status-indicator options
  • Field-exchangeable calibrated measurement modules
  • Traceable three-point CO₂ calibration certificate included
Smart Humidity and Temperature Probe for high pressure HMP4
  • Out-of-Stock

The Vaisala HMP4 provides high-accuracy humidity and temperature measurement in compressed air, breathing air, industrial gases, vacuum systems and other processes operating at pressures up to 100 bar.

  • Operating pressure below 100 bar, including vacuum applications
  • Humidity accuracy up to ±0.8% RH
  • Temperature range from -70 °C to +180 °C
  • Standalone Modbus RTU or connection to an Indigo transmitter
Vaisala HMT360 Intrinsically Safe Transmitter | HMT370EX Replacement
  • Out-of-Stock

The Vaisala HMT360 Series was an intrinsically safe transmitter platform for humidity, temperature and moisture measurement in hazardous areas. It is discontinued and replaced by the Vaisala HMT370EX with an application-specific probe.

  • HMT361 wall mounting → HMP371
  • HMT363 ducts and confined spaces → HMP373
  • HMT364 high pressure and vacuum → HMP374
  • HMT365 high temperature → HMP375
  • HMT367 high humidity → HMP377
  • HMT368 pressurised pipelines → HMP378
Smart Humidity and Temperature Probe for wall mounting HMP1
  • Out-of-Stock

The Vaisala HMP1 is a high-accuracy, interchangeable humidity and temperature probe for indoor spaces. It connects directly to an Indigo200 or Indigo300 transmitter to create a compact wall-mounted measurement system.

  • Humidity accuracy up to ±1.0% RH
  • Temperature accuracy up to ±0.2 °C
  • 0–100% RH and −40 to +60 °C measurement ranges
  • Modbus RTU and full Vaisala Indigo compatibility
Vaisala HMT370EX Intrinsically Safe Transmitter | Seacom
  • Out-of-Stock

The Vaisala HMT370EX provides intrinsically safe humidity and temperature measurement with HMP-series probes. The new DMP370 configuration combines the HMT370EX transmitter with a DMP37X DRYCAP® probe for low-dew-point measurement in hazardous locations.

  • HMP probes for relative humidity and temperature
  • DMP370 dew-point measurement from −70 to +10 °C Td/f
  • Two two-wire 4–20 mA outputs
  • Certified configurations for hazardous gas and dust areas, up to Zone 0 / 20
  • Detachable probes and traceable calibration

DMP370 availability: Vaisala plans first deliveries for Q1 2027. Contact Seacom for configuration and project lead time.

Vaisala HMP110
  • Out-of-Stock

The Vaisala HMP110 is a high-accuracy humidity and temperature probe designed for demanding equipment integration, environmental chambers, data loggers, incubators and controlled-environment applications.

It provides ±1.5% RH accuracy, a 0–100% RH range, −40 °C to +80 °C temperature measurement, a chemically resistant HUMICAP 180R sensor and analog or Modbus RTU output options.

Vaisala HMT140 Replacement with RFL100 | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala HMT140 Wi-Fi Data Logger has been discontinued and is no longer recommended for new monitoring systems.

  • Primary replacement: Vaisala RFL100 with AP10 VaiNet Access Point
  • Existing HMT140 installations can continue to be supported
  • Migration should be checked against the existing sensor and input type
  • Contact Seacom for replacement selection and viewLinc compatibility
Vaisala HMP8
  • Out-of-Stock

The Vaisala HMP8 provides high-accuracy humidity and temperature measurement in compressed air, refrigerant dryers and pressurised industrial processes up to 40 bar.

  • Humidity accuracy up to ±0.8% RH
  • Operating pressure from vacuum to 40 bar
  • Adjustable insertion depth with two probe lengths
  • Optional ball valve for insertion and removal under process conditions
Vaisala HMP7
  • Out-of-Stock

The Vaisala HMP7 is designed for continuously humid, rapidly changing and near-condensing environments. Probe heating helps prevent condensation while maintaining reliable process measurement.

  • Humidity accuracy up to ±0.8% RH
  • Probe heating for condensation prevention
  • −70 to +180 °C probe-head measurement range
  • Standalone Modbus RTU or Vaisala Indigo transmitter operation
Vaisala Indigo520 Supervisor
  • Out-of-Stock

The Vaisala Indigo520 Supervisor manages up to 100 compatible compact humidity and temperature probes through one host unit. It provides local visibility for the maintenance team and Modbus TCP communication for data centre BMS integration.

  • Two daisy chains: Up to 50 probes per chain.
  • 5-inch touchscreen: View measurements, probe status and alerts.
  • Web interface: Supports commissioning and configuration.
  • Malaysia project support: Contact Seacom for probe selection and installation requirements.

Expected availability: early 2027. Enquire with Seacom for configuration and delivery confirmation.

Vaisala Indigo510 Indigo520 Malaysia
  • Out-of-Stock

The Vaisala Indigo500 Series provides flagship industrial measurement integration: choose Indigo510 for a simplified single-probe system or Indigo520 for full dual-probe capability.

  • Indigo510: one probe and two isolated analog outputs
  • Indigo520: two probes, four isolated outputs and two relays
  • Ethernet web interface and Modbus TCP communication
  • Rugged IP66 and NEMA 4 metal enclosure
Vaisala HMW90 Humidity Transmitter | Vaisala Distributor Malaysia | Seacom
  • Out-of-Stock

The Vaisala HMW90 Series provides high-accuracy humidity and temperature measurement for demanding indoor HVAC and controlled-environment applications.

  • Humidity accuracy up to ±1.7% RH
  • Analog or Modbus RTU output models
  • Optional display and configurable relay
  • Replaceable measurement module with calibration certificate
This website uses cookies to ensure you get the best experience on our website