- Out-of-Stock
Vaisala HMP60 Humidity and Temperature Probe
The Vaisala HMP60 is a compact, durable and cost-effective humidity and temperature probe for equipment integration, data loggers, incubators, glove boxes, greenhouses and environmental monitoring systems.
It provides 0–100% RH and −40 °C to +60 °C measurement ranges, low power consumption, interchangeable Vaisala INTERCAP sensor and optional Modbus RTU communication.
Vaisala HMP60 Humidity and Temperature Probe
The Vaisala HMP60 is a compact humidity and temperature probe designed for volume applications and integration into equipment produced by other manufacturers. Its low power consumption, durable stainless-steel construction and flexible output options make it suitable for both fixed and battery-powered monitoring systems.
The probe measures relative humidity from 0–100% RH and temperature from −40 °C to +60 °C. Typical applications include incubators, glove boxes, greenhouses, fermentation chambers, data loggers and environmental monitoring equipment.
The HMP60 uses the field-replaceable Vaisala INTERCAP humidity sensor, reducing maintenance time because the sensor can be replaced without recalibrating the complete probe.
Why Choose the Vaisala HMP60?
- Compact Probe Design The miniature probe is suitable for installations where available space is limited.
- Low Power Consumption Average current consumption of approximately 1 mA makes the HMP60 suitable for battery-powered applications.
- Interchangeable INTERCAP Sensor The humidity sensor can be replaced in the field without returning the complete probe for recalibration.
- Flexible Output Selection Choose from several voltage outputs, an optional 4–20 mA converter or RS-485 Modbus RTU communication.
- Easy Cable Connection A detachable cable with a standard four-pin M8 connector simplifies installation and replacement.
- Rugged Construction The sealed AISI 316 stainless-steel probe body is designed for demanding environmental conditions.
Measurement Performance
- Relative Humidity Range 0–100% RH.
- Humidity Accuracy at 0 °C to +40 °C ±3% RH from 0–90% RH and ±5% RH from 90–100% RH.
- Humidity Accuracy Outside the Central Range ±5% RH from 0–90% RH and ±7% RH from 90–100% RH at −40–0 °C and +40–60 °C.
- Humidity Sensor Field-replaceable Vaisala INTERCAP capacitive humidity sensor.
- Temperature Range −40 °C to +60 °C.
- Temperature Accuracy at +10 °C to +30 °C ±0.5 °C.
- Temperature Accuracy Across the Remaining Range ±0.6 °C from −40–10 °C and +30–60 °C.
- Analog Output Accuracy ±0.2% of full scale at +20 °C.
Available Measurement Parameters
- Relative Humidity Standard humidity measurement across the complete 0–100% RH range.
- Temperature Standard temperature measurement from −40 °C to +60 °C.
- Dew Point and Frost Point Optional calculated dew-point or frost-point temperature output.
- Wet-Bulb Temperature Optional calculated wet-bulb temperature output.
- Absolute Humidity Optional calculated absolute-humidity output.
- Mixing Ratio and Enthalpy Optional calculated parameters for environmental and HVAC applications.
Outputs and Communication
- Two Analog Channels Configurable output ranges include 0–1 VDC, 0–2.5 VDC, 0–5 VDC and 1–5 VDC.
- Optional 4–20 mA Output Available using a separate single-channel loop-power converter.
- Optional Digital Output Two-wire half-duplex RS-485 communication supporting Modbus RTU.
- Vaisala Insight Compatibility Connect the probe to Vaisala Insight PC software for configuration, diagnostics and adjustment.
- Vaisala Indigo80 Compatibility The HMP60 can be connected to the Vaisala Indigo80 handheld indicator using the appropriate cable.
- Standard M8 Connection Four-pin M8 connector according to IEC 60947-5-2.
Electrical Specifications
- Average Power Consumption Approximately 1 mA.
- Maximum Peak Consumption Approximately 5 mA.
- Supply for 1 V or 2.5 V Output 5–28 VDC.
- Supply for 5 V Output 8–28 VDC.
- Supply with Loop-Power Converter 8–28 VDC.
- Supply with Digital Output 5–28 VDC.
- Analog Start-Up Time Approximately two seconds at most valid operating voltages.
- Digital Start-Up Time Approximately one second.
Mechanical and Environmental Specifications
- Operating Temperature −40 °C to +60 °C.
- Protection Rating IP65 when used with an appropriate sensor filter.
- Probe Body AISI 316 stainless steel.
- Probe Dimensions Approximately 71 mm long and 12 mm in diameter.
- Body Thread M12 × 1 with a 10 mm thread length.
- Probe Weight Approximately 17 g without a cable.
- Probe and Short Cable Weight Approximately 28 g with a 0.3 m cable.
- Sensor Protection Membrane, plastic-grid, stainless-steel and PTFE filter options are available.
Easy Installation and Maintenance
- Detachable Probe Cable The screw-on M8 connector allows quick installation and probe replacement.
- Multiple Cable Lengths Connection cables are available in different lengths and temperature ratings.
- Field-Replaceable Sensor Replace the INTERCAP humidity sensor without replacing the complete probe.
- Duct Installation An optional duct installation kit and mounting flange are available.
- PC Configuration An optional USB service cable allows connection to Vaisala Insight PC software.
- Flexible Equipment Integration The compact body and low power requirements simplify integration into third-party equipment.
Typical Applications
- Data Loggers Low-power humidity and temperature measurement for portable and fixed data-acquisition systems.
- Incubators Environmental measurement for research, laboratory and life-science incubators.
- Glove Boxes Compact humidity and temperature monitoring in controlled work chambers.
- Greenhouses Environmental measurement for crop research, horticulture and climate-control systems.
- Fermentation Chambers Humidity and temperature measurement for controlled fermentation environments.
- Original Equipment Integration Integration into environmental chambers, instruments and equipment manufactured by third parties.
- Battery-Powered Monitoring Low-current operation for remote and portable monitoring equipment.
- HVAC and Building Automation Compatible with selected modular transmitter and environmental-control configurations.
Accessories and Spare Parts
- Replacement INTERCAP Sensor Available individually or in packages of ten sensors.
- Sensor Filters Plastic-grid, membrane, stainless-steel, PTFE membrane and sintered PTFE filters are available.
- Duct Installation Kit Accessory kit for mounting the HMP60 in an air duct.
- 4–20 mA Loop-Power Converter Separate converter for applications requiring a current-loop output.
- USB Service Cable Connects the HMP60 to Vaisala Insight PC software.
- Indigo80 Connection Cable Connects the probe to the Vaisala Indigo80 handheld indicator.
Vaisala HMP60 Supplier in Malaysia
Seacom Process Instruments supplies the Vaisala HMP60 humidity and temperature probe in Malaysia. Our team can assist with selecting the measurement parameters, output signals, cable length, sensor filter and mounting accessories required for your application.
Contact Seacom for HMP60 product selection, pricing and availability for data loggers, incubators, glove boxes, greenhouses, fermentation chambers and equipment-integration projects.
You might also like
The Vaisala HMP110 is a high-accuracy humidity and temperature probe designed for demanding equipment integration, environmental chambers, data loggers, incubators and controlled-environment applications.
It provides ±1.5% RH accuracy, a 0–100% RH range, −40 °C to +80 °C temperature measurement, a chemically resistant HUMICAP 180R sensor and analog or Modbus RTU output options.
The Vaisala HMX110 Series provides accurate humidity and temperature measurement for demanding indoor, duct and outdoor HVAC applications.
- Humidity accuracy up to ±2% RH
- Wall, duct, outdoor and immersion models
- 4–20 mA or Modbus RTU configurations
- Traceable calibration certificate included
The Vaisala HMW90 Series provides high-accuracy humidity and temperature measurement for demanding indoor HVAC and controlled-environment applications.
- Humidity accuracy up to ±1.7% RH
- Analog or Modbus RTU output models
- Optional display and configurable relay
- Replaceable measurement module with calibration certificate
The Vaisala XMP10 Series comprises compact humidity and temperature probes offering accuracy levels up to ±1% RH and ±0.1 °C for demanding HVAC, data-centre and critical-environment applications.
The probes feature analog or Modbus RTU outputs, a standard M8 connector, an IP65-rated body and compatibility with Vaisala Origo10 modular HVAC transmitters.
16 other products in the same category:
The Vaisala HMP9 combines a miniature 5 mm probe head with fast-response, high-accuracy humidity and temperature measurement for tight spaces and rapidly changing environments.
- Humidity accuracy up to ±0.8% RH
- Temperature accuracy up to ±0.1 °C
- −40 to +120 °C probe-head measurement range
- Standalone Modbus RTU or Vaisala Indigo transmitter operation
The Vaisala PTU300 combined barometric pressure, relative humidity and temperature in one transmitter. The series is discontinued and has been replaced by a suitable Indigo520 barometric-pressure configuration with an application-specific HMP probe.
- Legacy three-in-one pressure, humidity and temperature transmitter
- PTU301, PTU303, PTU304, PTU305, PTU307 and PTU308 variants
- Former applications include laboratories, meteorology and semiconductor measurement
- Current replacement platform: Indigo520 with barometric-pressure measurement
- Humidity probe selected according to mounting and process conditions
- Existing wiring, outputs and process connections require migration review
The Vaisala HMDW80 Series provides cost-effective humidity and temperature measurement for routine HVAC and building-automation applications.
- Humidity accuracy up to ±3% RH
- Wall, duct and outdoor installation models
- Current or voltage output configurations
- Replaceable INTERCAP® humidity sensor
The Vaisala Indigo200 Series is the standard transmitter platform for one interchangeable Indigo-compatible smart probe, providing local display and practical automation-system connectivity.
- Indigo201 with three analog outputs and two relays
- Indigo202 with Modbus RTU and two relays
- Colour display with numerical and graphical views
- IP65 enclosure for industrial measurement applications
The Vaisala HMP1 is a high-accuracy, interchangeable humidity and temperature probe for indoor spaces. It connects directly to an Indigo200 or Indigo300 transmitter to create a compact wall-mounted measurement system.
- Humidity accuracy up to ±1.0% RH
- Temperature accuracy up to ±0.2 °C
- 0–100% RH and −40 to +60 °C measurement ranges
- Modbus RTU and full Vaisala Indigo compatibility
The Vaisala HMM170 provides accurate and stable humidity and temperature measurement for demanding environmental chambers, including vacuum and pressurised applications.
- Humidity accuracy up to ±1.0% RH
- Temperature measurement from −70 to +180 °C
- Modbus RTU and three configurable analog outputs
- Probe heating, sensor warming and chemical-purge options
The Vaisala Origo10 Series comprises modular HVAC transmitters with interchangeable probes for humidity, temperature, CO2 and dew-point measurement.
Available with analog, Modbus RTU and BACnet MS/TP outputs, wall or duct mounting, an optional display and an IP65-rated enclosure.
The Vaisala HMM100 provides reliable humidity measurement and a configurable analog output for integration into environmental chambers and OEM equipment.
- 0–100% RH measurement range
- Relative-humidity or dew-point output
- Current and voltage output options
- Plastic or stainless-steel probes for temperatures up to +180 °C
The Vaisala GMW90 Series provides stable wall-mounted carbon-dioxide and temperature measurement, with optional humidity, for demanding HVAC and building-automation applications.
- Carbon-dioxide measurement from 0 to 5000 ppm
- CO₂ accuracy up to ±(30 ppm + 2% of reading)
- Temperature measurement from −5 to +55 °C
- Optional HUMICAP® relative-humidity measurement from 0 to 95 %RH
- Voltage, current or Modbus RTU output models
- Display and CO₂ status-indicator options
- Field-exchangeable calibrated measurement modules
- Traceable three-point CO₂ calibration certificate included
The Vaisala XMW85 Series provides reliable indoor CO2, humidity and temperature measurement for demand-controlled ventilation, smart buildings and indoor air-quality monitoring.
All models support Modbus RTU over RS-485, with two-in-one and three-in-one measurement configurations and optional metric or non-metric displays.
The Vaisala HMP155 provides stable humidity and temperature measurement for automatic weather stations, road-weather systems, airports, research sites and demanding outdoor monitoring.
- Relative-humidity measurement from 0 to 100 %RH
- Operating range from −80 to +60 °C
- HMP155A with two analogue voltage outputs
- HMP155D with RH voltage output and passive four-wire Pt100 temperature
- HMP155E with RS-485 digital output
- Optional warmed probe, chemical purge and additional temperature sensor
The Vaisala HMT370EX provides intrinsically safe humidity and temperature measurement with HMP-series probes. The new DMP370 configuration combines the HMT370EX transmitter with a DMP37X DRYCAP® probe for low-dew-point measurement in hazardous locations.
- HMP probes for relative humidity and temperature
- DMP370 dew-point measurement from −70 to +10 °C Td/f
- Two two-wire 4–20 mA outputs
- Certified configurations for hazardous gas and dust areas, up to Zone 0 / 20
- Detachable probes and traceable calibration
DMP370 availability: Vaisala plans first deliveries for Q1 2027. Contact Seacom for configuration and project lead time.
The Vaisala HMP8 provides high-accuracy humidity and temperature measurement in compressed air, refrigerant dryers and pressurised industrial processes up to 40 bar.
- Humidity accuracy up to ±0.8% RH
- Operating pressure from vacuum to 40 bar
- Adjustable insertion depth with two probe lengths
- Optional ball valve for insertion and removal under process conditions
The Vaisala MGP261 measures methane, carbon dioxide and humidity directly in raw biogas. Its in-situ design avoids a separate sampling system and helps operators monitor gas quality while protecting downstream equipment.
- Measures CH4, CO2 and water vapour in one probe
- 0–100 vol-% measurement range for methane and carbon dioxide
- Humidity output as 0–25 vol-% H2O or −10 to +60 °C dew point
- Heated optics help prevent condensation in wet biogas
- Three isolated 4–20 mA outputs and RS-485 Modbus RTU
- Ex-certified construction for direct installation in hazardous process areas
The Vaisala HMP5 provides high-accuracy humidity and temperature measurement in ovens, dryers, kilns and other processes operating at temperatures up to +180 °C.
- Humidity accuracy up to ±0.8% RH
- Temperature accuracy up to ±0.1 °C
- −70 to +180 °C probe-head measurement range
- Standalone Modbus RTU or Vaisala Indigo transmitter operation
The Vaisala HMM105 provides reliable humidity measurement for integration into environmental chambers, incubators and OEM equipment.
- 0–100% RH measurement range
- I2C output for relative humidity or dew point
- Detachable 12 mm probe with 300 mm flexible cable
- Probe withstands +180 °C continuously and +200 °C temporarily