Vaisala HUMICAP® Humidity and Temperature Probe HMP8 is designed for pressurized applications in compressed air systems, refrigerant dryers, and other pressurized industrial applications where easy insertion and removal of the probe and adjustable installation depth into the pipeline are needed. The HMP8 is part of the Indigo product family and compatible with Indigo500 and Indigo200 series transmitters and free Insight PC Software.
Instrinsically Safe Humidity and Humidity Transmitter HMT360 series
Vaisala's HMT360 humidity and temperature transmitter is designed for use in potentially explosive atmospheres. The electronics are designed so that the transmitter is intrinsically safe. The whole transmitter can be installed directly into an explosive area, even into areas classified as having a constant risk of explosion (Zone 0). HMT360 fulfils all requirements of current standards. The microprocessor-based HMT360 is easy to install, maintain and calibrate due to its modular structure. The interchangeable probes are easy to remove and enable on-site calibration. They make the HMT360 series versatile and ensure its suitability for almost any application.
Also suitable for measuring water activity of Jet Fuel
This product will be discontinued by Jun 2021.
Please click here to visit its successor Intrinsically Safe Humidity And Temperature Transmitter Series HMT370EX
|Model||HMT368F Transmitter and Probe for Moisture in Oil Measurements
HMT360F Transmitter Unit for Moisture in Oil Measurements
HMT368H Transmitter and Probe for Jet Fuel Measurements
HMT360H Transmitter Unit for Jet Fuel Measurements
HMT362N Transmitter with probe for Natural Gas with flanged probe
HMT364N Transmitter with probe for Natural Gas in high pressure
HMT368N Transmitter and probe for Natural Gas pipeline installation
HMT360N Transmitter Unit for Natural Gas measurments
HMP362 Flanged probe
|Measurement Range||Humidity: 0 - 100% rH
|Sensor||Humidity: Vaisala HUMICAP 180L2
Temperature: PT100 RTD
|Accuracy at 20ºC||Humidity: ±1.0%rH (0 - 90%rH), ±2.0%rH (90 - 100%rH)
|Mechanics||Protection: IP65 (NEMA 4)
Complies with classifications from PTB (CENELEC, Europe), FM (USA), CSA (Canada), TestSafe (Australia), TIIS (Japan) and PCEC (China)
|Remarks||HMT361 for wall mounting
HMT363 for duct mounting and tight spaces
HMT364 for high pressures up to 100 bar and vacuum conditions
HMT365 for high temperatures
HMT367 Transmitter with Vapor Tight Probe
HMT368 for pressurized pipelines up to 40 bar
12 other products in the same category:
The Vaisala 2000 recorder combines internal temperature and RH sensors with an optional external channel for either current or voltage inputs for recording parameters such as differential pressure, CO2, level, particles, or conductivity. The Vaisala 2000 recorder can include a Boolean channel for door switches or alarm contacts.
Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300
- Combines the measurement of barometric pressure, relative humidity and temperature into one instrument
Vaisala HMT330 series are easy-to-use transmitters for demanding industrial and air conditioning applications. The transmitters measure relative humidity and temperature and from these calculate dew point and wet bulb temperature, mixing ratio and absolute humidity. They can be configured to the customer's requirements on the production line, but configuration and parameters can also be set by the user. The series has both analogue and serial outputs as well as several options: different cable lengths, power supply modules and serial interface modules as well as a local display.
The Vaisala HMT140 wireless data logger is designed for humidity, temperature and analog signal monitoring in warehouses, freezer and cryogenic farms, laboratories, blood banks and many other life science applications.
The Vaisala HMT140 incorporates Vaisala HUMICAP® technology to measure relative humidity and temperature accurately and reliably. The Vaisala HUMICAP sensor is resistant to dust and most chemicals. Alternatively, the Vaisala HMT140 can connect to Resistance Temperature Detectors (RTDs), Voltage, Current and Contact sensors, making the Vaisala HMT140 the most versatile Vaisala data logger for life science applications.
for Vaisala's Smart Humidity, Temperature, Dew Point, Moisture in Oil, CO2 and H2O2 Probes
Vaisala Indigo200 Series host devices are part of Vaisala Indigo product family and intended for Vaisala's intelligent, stand-alone humidity probes (HMP1, HMP3, HMP4, HMP5, HMP7, HMP8 and HMP9), dew point probes (DMP5, DMP6, DMP7 and DMP8), temperature probe (TMP1), CO2 probes (GMP251 and GMP252), moisture in oil probe MMP8, as well as our vaporized hydrogen peroxide probe series HPP270: including HPP271 to measure hydrogen peroxide vapor (ppm), or the HPP272 to measure hydrogen peroxide vapor (ppm), temperature, and humidity (relative humidity and relative saturation). The HPP272 probe includes other calculated parameters such as dew point and vapor pressure measurements.
Looking for a transmitter with a metal enclosure? See Indigo500 series with dual-probe support and many more additional features.
Typical applications for the Indigo200 include industrial and compressed air drying, life science incubators, hatchers and setters, greenhouses, cold storage & refrigeration, food transportation, CO2 safety, hydraulic and lubrication oil monitoring, demanding HVAC such as animal shelters, swimming pools, parking garages, and facilities using vaporized hydrogen peroxide decontamination.
Indigo200 allows for easy evaluation and visualization of data, also wirelessly. The installation is uncomplicated, which saves time. Watch video on how to install Indigo201 and configure analog outputs. Also the probe types are interchangeable reducing downtime. The enclosure with an IP65 classification is safe for harsh environments and resistant to dust and most chemicals. The smooth surface of the enclosure makes cleaning easy.
The Vaisala Indigo520 transmitter with dual-probe and multi-parameter support is a host device for Vaisala Indigo-compatible, stand-alone smart probes. The transmitter offers many additional features to the Indigo probes.
The touchscreen display provides local data visualization and easy access to probe configuration. The transmitter also extends the options for connectivity, supply voltage and wiring, compared to using just a smart probe. It also provides mechanical support when wall-mount probe installation is preferred. Rugged IP66- and NEMA4-rated metal enclosure ensures reliable performance even in the harshest conditions.
The Indigo-compatible smart probes include humidity probes (HMP1, HMP3, HMP4, HMP5, HMP7, HMP8 and HMP9), dew point probes (DMP5, DMP6, DMP7 and DMP8), carbon dioxide probes (GMP251 and GMP252), moisture in oil probe (MMP8), temperature probe (TMP1), and vaporized hydrogen peroxide probes (HPP270). The Indigo520 is also compatible with MHT410 Moisture, Hydrogen and Temperature Transmitter for power transformer online monitoring
The Indigo520 transmitter can accommodate up to two probes simultaneously. The plug-and-play probes are easy to install and remove for calibration.
The Vaisala HMW90 Series has been complemented with four new models: TMW92 and TMW93 temperature transmitters for applications where only temperature measurement is needed and the configurable HMW90 and TMW90 for special scalings. The HMW90 and TMW90 transmitters are available in four color options: standard white, black, grey and ivory.
The Vaisala HM40 is a compact, robust and affordable hand-held meter for various portable measurement applications. It is an ideal spot-checking tool that is easy to use and provides reliable measurement. The HM40 hand-held utilizes the interchangeable HMP110 probe that was launched earlier this year and is equipped with the latest humidity sensor technology, the HUMICAP® 180R.
Model available: HM41, HM42, HM45, HM46
Humidity and Temperature Probe HMP1
for wall mounting
Vaisala HUMICAP® Humidity and Temperature Probe HMP1 is designed for measuring ambient measurement in indoor spaces. HMP1 can be directly connected to Indigo200 series transmitters to form a single wall-mounted unit. Its probe head and body are integrated to a single unit and it uses the miniature 5 mm (0.2 in) diameter HUMICAP® sensor and head for great stability and fast response time.
HMP1 is part of the Indigo product family and compatible with Indigo200 and Indigo500 Series Transmitters. HMP1 can also be used with the Vaisala Insight PC Software for data visualization, easy probe configuration and self-calibration.