RCM general purpose Flo-Guard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy
Magnetic Flow Sensor
Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.
|Flow-rate range||0.3 - 3 L/min||1.0 - 10L/min||1.5 - 20L/min||3.0 - 60L/min|
(Standard installation position)
|Pressure drop||12 kPa or less
|15 kPa or less
|20 kPa or less
|60 kPa or less
|Fluid temperature range||0 to +60°C||0 to +70°C||0 to +60°C||0 to +70°C||0 to +60°C||0 to +70°C|
|Connection||R 1/2||R 3/4|
|Maximum working pressure||1MPa or less with a fluid temperature of +20°C|
|Viscosity||0.5 to 1.5 mPa·s|
|Output signal||Open collector pulse
4-wires, Lead-wire length approx. 600mm
|Duty ratio 3/7 < A/B < 7/3|
|Impressed voltage range||3 to 15 V DC|
|Ambient temperature||-20° to +80° (Dew condensation must be avoided)|
12 other products in the same category:
Ryutai Kogyo MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.
MCF series are now used in the computer-controlled flow system. Output signals are analog DC current of high linearity and agree with any inputs of remote instruments. Well suited design on applications The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.
The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.
TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.
- Electronic Version
- Crude Palm Oil (CPO)
- Heavy Oil
- Light Oil
TOKICO FLOWMETER, TOKICO OIL FLOWMETER is a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.
- Crude Palm Oil (CPO)
- Heavy Oil
- Light Oil
Ryutai Kogyo Pitot Cell Flowmeter PFT is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
Aichi Tokei Turbine gas meters TBZ and TBX series, developed to measure gas consumption of a small boiler, an individual furnace, or other individual gas equipment, are achieved to have high accuracy consists with the light-weighted compact stylish body.
They can widely correspond to maximum working pressure and maximum measuring flow-rate.
The built-in 2-systems pulse transmitter allows your configuration of a remote reading system or of an advanced energy management system. Also, TBZ series even offers temperature / pressure compensation function that is to display gas consumption converted to its volume at the standard conditions (0,1 atms ), etc.
Ryutai Kogyo Pitot Cell Flowmeter PFT-A is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
Ryutai Kogyo Purge meters PGF-N are variable area flowmeters that used to measure small flowrates.
It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.
Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.
The ones introduced here are Aichi Tokei's standard governors.
•Governor for high temperature gas
•Governor with the precise adjustment handle
•Governor for gas that contains sulfide
•Other special governors
The RCM Flo-GageTM is a direct reading flow meter with a large, easy to read dial calibrated in engineering units (GPM, SCFM, l/m, etc.) The Flo-Gage measures flow based on a pressure diffential created across a built-in calibrated nozzle. The meter is self-contained and complete, seperate orifices, or blocking, purging or equalizing valves.
The Flo-Gage is suitable for measuring water, oil and most other low viscocity liquids which do not deposit out and which are compatible with the materials of construction. The Flo-Gage is also suitable for measuring compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (Specify Option I). Saturated steam can also be measured up to 120 psig. (Option K).
Kent Elster Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.