Flow Governor

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.

The ones introduced here are Aichi Tokei's standard governors

  • Governor for high temperature gas
  • Governor with the precise adjustment handle
  • Governor for gas that contains sulfide
  • Other special governors



Model A-N, AH, C-N, CH, A-N-D, C-N-6D, A-Z, YS/YK13S
Measurement Range see below



Model: A-N Overview
Inlet pressure P1 1 to 50kPa except A8N-1 and A10N-1 (1 to 20kPa) and A13N-1 (1 to 40kPa)
Outlet pressure P2 0.5 to 30kPa except A8N-1 and A10N-1 (0.5 to 10kPa) and A75N-11 (0.7 to 30kPa)
Pipe size 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3"
(DN: 8, 10, 13, 20, 25, 30, 40, 50, 75mm)
Same size for the inlet and outlet and is as same as [ ] of A[ ]N.
Max. pressure difference 30kPa except A8 to A13 (10kPa)
Min. pressure difference 0.5kPa
Working temperature range 0 to 60 °C
Model
A8N-1 to A50N-1 General purpose type
A20N-2 to A50N-2 High performance type
A40N-11 to A75N-11 Large capacity, high performance type



Model AH Overview
Inlet pressure P1 30 to 300kPa
Outlet pressure P2 2 to 20kPa
Working temperature range 0 to 60 °C
Model and pipe size
High response type Inlet Outlet
AH40N-11 1 1/2" (40mm) 1 1/2" (40mm)
AH50N-11 2" (50mm) 2" (50mm)
AH75N-11 3" (75mm) 3" (75mm)



Model: C-N Overview
Inlet pressure P1 30 to 500kPa
Outlet pressure P2 1 to 30kPa
Working temperature range 0 to 60 °C
Model and pipe size
General purpose type Inlet Outlet
C13N-005-1 1/2" (13mm) 1/2" (13mm)
C20N-005-1 3/4" (20mm) 3/4" (20mm)
C20N-015-1 3/4" (20mm) 3/4" (20mm)
C25N-050-1 1" (25mm) 1 1/2" (40mm)
C40N-100-1 1 1/2" (40mm) 2" (50mm)
C50N-200-1 2" (50mm) 2" (50mm)



Model: CH Overview
Inlet pressure P1 30 to 300kPa
Outlet pressure P2 1 to 20kPa
Working temperature range 0 to 60 °C
Model and pipe size
High response type Inlet Outlet
CH25N-050-1 1" (25mm) 1 1/2" (40mm)



Model A-N-D Overview
Inlet pressure P1 1 to 50kPa
Outlet pressure P2 0.5 to 30kPa except A75N-51D (0.7 to 30kPa)
Max.pressure difference 30kPa
Min.pressure difference 0.5kPa
Working temperature range 0 to 60 °C
Model and pipe size
High response type Inlet Outlet
A50N-6D 2" (50mm) 2" (50mm)
Large capacity,
high performance type
Inlet Outlet
A50N-51D 2" (50mm) 2" (50mm)
A75N-51D 3" (75mm) 3" (75mm)



Model C-N-6D Overview
Inlet pressure P1 30 to 1060kPa
Outlet pressure P2 1 to 30kPa
Working temperature range 0 to 60 °C
Model and pipe size
High response type Inlet Outlet
C20N-6D 3/4" (20mm) 3/4" (20mm)
C25N-6D 1" (25mm) 1 1/2" (40mm)
C40N-6D 1 1/2" (40mm) 2" (50mm)
C50N-6D 2" (50mm) 2" (50mm)



Model A-Z Overview
In case of adoption as a zero governor
Inlet pressure P1 0.5 to 20kPa except A8Z-1, A10Z-1 and A13Z-1 (0.5 to 10kPa)
Outlet pressure P2 0kPa
<In case of adoption as a proportional governor>
Inlet pressures P1 Max.50kPa
Outlet pressure P2 Max.30kPa,P2=loading pressure (PL)
Max.pressure difference 30kPa
<Common specification>
Pipe size 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3"
(DN: 8, 10, 13, 20, 25, 30, 40, 50, 75mm)
Same size for the inlet and outlet and is as same as [ ] of A[ ]Z.
Working temperature range: 0 to 60 °C
Model
A8Z-1 to A50Z-1 General purpose type
A20Z-2 to A50Z-2 High performance type
A40Z-11 to A75Z-11 Large-capacity, high-performance type



Model YS/YK13SOverview
Max. working pressure* 0.5MPa for YS and 1.0MPa for YK13S
Pipe size 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
(13, 20, 25, 30, 40, 50mm)
Model and body material
Model Material
YS15 to YS50 FC200
YK13S-15A to YK13S-50A SCS13A



Overview
Max. working pressure 0.5MPa for F-MK2, 1.0Mpa for FD-MK2
Pipe size 2", 3", 4", 6"
(50, 80, 100, 150mm)

Specific References

back to top